I have the motherboard SUN-AXi but it is not loaded, that's what is written and stops, help to understand the reason? Found Bus 1 (PCI B) Vendor/DevID = 47521002 @ 1fe01011000 Found Bus 1 (PCI B) Vendor/DevID = 710110b9 @ 1fe01011800 Found Bus 1 (PCI B) Vendor/DevID = 153310b9 @ 1fe01013800 Found Bus 1 (PCI B) Vendor/DevID = 545110b9 @ 1fe01014000 Found Bus 1 (PCI B) Vendor/DevID = 1100108e @ 1fe01016000 Found Bus 1 (PCI B) Vendor/DevID = 522910b9 @ 1fe01016800 Processor Speed = [Speed Jumper = 4] 548 MHz Firmware CORE Sun Microsystems, Inc. @(#) core 1.1.2 2003/08/22 16:06 Hardware Power ON Verifying NVRAM...Done MCR0 = 56a0c206 MCR1 = 80008000 MCR2 = cf2000f0 MCR3 = 8a Ecache Size = 512 KB NVRAM Test Icache Test Dcache Test MMU Test FPU Test Ecache Tag Addr Test Ecache RAM Addr Test Clearing E$ Tags Done Clearing I/D TLBs Done Probing memory Done MEMBASE=0x40000000 MEMSIZE=0x20000000 Data Line Test Core Memory Test Clearing memory...including Unix retained memory...Done Turning ON MMUs Done Copy ROM to RAM (178032 bytes) Done Orig PC=0x1fff00088ec New PC=0xf0f08944 Processor Speed=548MHz Memory Data Line Test Memory Addr Line w/ Ecache Test ECC Block Memory Test Looking for Dropin cPOST ... found Copying Client...Done Transferring control to Client... Sun Microsystems, Inc. cPOST @(#) cpost 1.0.5 2005/04/06 11:09 All Basic UltraSPARC IIe PBM Tests Init CPU PBM PIO Decoder And BCT Test CPU IOMMU Reg Test CPU IOMMU RAM NTA Test CPU IOMMU CAM NTA Test CPU IOMMU RAM Address Test CPU IOMMU CAM Address Test IOMMU TLB Compare Test IOMMU TLB Flush Test PBM Control/Status Reg Test PBM Diag Reg Test CPU PBM Reg Test Init PCI Bus 1, Dev 2, VENDOR = 1002, DeviceID = 4752 Bus 1, Dev 8, VENDOR = 10b9, DeviceID = 5451 Bus 1, Dev c, VENDOR = 108e, DeviceID = 1100 Bus 1, Dev d, VENDOR = 10b9, DeviceID = 5229 All Basic RIO Tests (RIO# 1) RIO Ebus Config Space Reg Test RIO Network Config Space Reg Test RIO Firewire Config Space Reg Test RIO USB Config Space Reg Test Basic SouthBridge Tests Southbridge ISA Config Space Reg Test Southbridge PMU Config Space Reg Test Southbridge IDE Config Space Reg Test Southbridge Audio Config Space Reg Test All Memory Stress Tests Consist Write Data Test Resetting... Found Bus 1 (PCI B) Vendor/DevID = 47521002 @ 1fe01011000 Found Bus 1 (PCI B) Vendor/DevID = 710110b9 @ 1fe01011800 Found Bus 1 (PCI B) Vendor/DevID = 153310b9 @ 1fe01013800 Found Bus 1 (PCI B) Vendor/DevID = 545110b9 @ 1fe01014000 Found Bus 1 (PCI B) Vendor/DevID = 1100108e @ 1fe01016000 Found Bus 1 (PCI B) Vendor/DevID = 522910b9 @ 1fe01016800 Processor Speed = 548 MHz Firmware CORE Sun Microsystems, Inc. @(#) core 1.1.2 2003/08/22 16:06 Software Power ON Verifying NVRAM...Done MCR0 = 56a0c206 MCR1 = 80008000 MCR2 = cf2000f0 MCR3 = 8a Ecache Size = 512 KB Clearing E$ Tags Done Clearing I/D TLBs Done Probing memory Done MEMBASE=0x40000000 MEMSIZE=0x20000000 Clearing memory...Done Turning ON MMUs Done Copy ROM to RAM (178032 bytes) Done Orig PC=0x1fff00088ec New PC=0xf0f08944 Processor Speed=548MHz Looking for Dropin FVM ... found Decompressing Client Done Transferring control to Client... ttya initialized Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0 Probing upa at 1f,0 pci pci pci Probing upa at 0,0 SUNW,UltraSPARC-IIe SUNW,UltraSPARC-IIe (512 Kb) Loading Support Packages: kbd-translator Loading onboard drivers: ebus flashprom eeprom idprom Probing Memory Bank #0 0 Megabytes Probing Memory Bank #1 512 Megabytes Probing Memory Bank #2 0 Megabytes Probing Memory Bank #3 0 Megabytes
failed ram?.. why is bank #0 reporting 0MB ??? .. doubtful a Sun board will work with that config.. #2 ans #3 are ok with 0Mb, but #0 and #1 need to match.. #0 MUST contain a working stick.
