ok.. my first screw up on nero..

Discussion in 'Nero discussion' started by thelox714, Feb 12, 2006.

Page 1 of 2
  1. thelox714

    thelox714 Regular member

    Joined:
    Apr 16, 2005
    Messages:
    1,220
    Likes Received:
    0
    Trophy Points:
    46
    i'm not sure if this is the correct log.. and i know there's been ppl that state to not use nero express. i dont have my maxell RWs with me.


    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
    Nero version: 6.3.1.25 (Nero Express)
    Recorder: <DVDRW USB 16X> Version: U089 - HA 3 TA 0 - 6.3.1.25
    Adapter driver: <> HA 3
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.3.1.25
    Adapter driver: <d347prt> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ-820S D: CDRom0
    Generic DVD-ROM E: CDRom1
    DVDRW USB 16X F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523244kB)
    Free physical memory: 118MB (121088kB)
    Memory in use : 76 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    12.2.2006
    UDF/ISO compilation
    2:00:10 PM #1 Phase 112 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation started

    2:00:10 PM #2 Phase 114 File dlgbrnst.cpp, Line 1855
    DVD-Video files reallocation completed (no file modified)

    2:00:10 PM #3 Text 0 File Isodoc.cpp, Line 6083
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE

    2:00:10 PM #4 Phase 111 File dlgbrnst.cpp, Line 1855
    DVD-Video files sorted

    2:00:11 PM #5 Text 0 File Reader.cpp, Line 126
    Reader running

    2:00:11 PM #6 Text 0 File Writer.cpp, Line 124
    Writer DVDRW USB 16X running

    2:00:11 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:00:11 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
    First writeable address = 0 (0x00000000)

    2:00:11 PM #9 Text 0 File Burncd.cpp, Line 3152
    Turn on Disc-at-once, using DVD media

    2:00:11 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2286063 (508:00.63, 4464MB)

    2:00:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
    Write in overburning mode: NO (enabled: CD)

    2:00:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
    Recorder: DVDRW USB 16X, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    2:00:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    2:00:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (CTransferItem)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2286064 (2286064) = #2286064/508:0.64
    relocatable, disc pos for caching/writing not required/required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286064 blocks [DVDRW USB 16X ]
    --------------------------------------------------------------

    2:00:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
    Prepare recorder [DVDRW USB 16X ] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681859072, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2286064 | lead-out | 1 | 0x00 | 0x41

    2:00:12 PM #16 Phase 24 File dlgbrnst.cpp, Line 1855
    Caching of files started

    2:00:12 PM #17 Text 0 File Burncd.cpp, Line 4163
    Cache writing successful.

    2:00:12 PM #18 Phase 25 File dlgbrnst.cpp, Line 1855
    Caching of files completed

    2:00:12 PM #19 Phase 36 File dlgbrnst.cpp, Line 1855
    Burn process started at 8x (11,080 KB/s)

    2:00:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    2:00:12 PM #21 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 7:07,628 (427628ms) -> OK

    2:00:12 PM #22 Text 0 File DVDR.cpp, Line 2000
    Recording mode: Sequential Recording Mode

    2:00:12 PM #23 Text 0 File Mmc.cpp, Line 20660
    Set BUFE: Super Link -> ON

    2:00:12 PM #24 Text 0 File DVDR.cpp, Line 2141
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    2:00:12 PM #25 Text 0 File Cdrdrv.cpp, Line 8230
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 5
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    2:00:23 PM #26 Text 0 File Cdrdrv.cpp, Line 1297
    14:00:23.296 - DVDRW USB 16X\H3 T0 : Queue again later

    2:00:30 PM #27 Text 0 File Cdrdrv.cpp, Line 1297
    14:00:30.062 - DVDRW USB 16X\H3 T0 : Queue again later

    2:01:12 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1445
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x0A4F0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x05 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    2:01:12 PM #29 CDR -1135 File Writer.cpp, Line 304
    Write error

    2:01:12 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    2:01:12 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    2:01:12 PM #32 Text 0 File DVDR.cpp, Line 2383
    EndDAO: Last written address was 1471

    2:01:12 PM #33 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    2:01:12 PM #34 Text 0 File dlgbrnst.cpp, Line 1713
    Set remaining time: 0:00,000 (0ms) -> OK

    2:01:12 PM #35 Phase 38 File dlgbrnst.cpp, Line 1855
    Burn process failed at 8x (11,080 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/22/2003 7:15:02 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 1:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    i dont know if that's even the correct one.. but that's what i got. if you need anymore info.. just ask.

    i'm usually doing my burning on mac. and i've done my burning on this pc and its been working fine, til now.
     
    Last edited: Feb 13, 2006
    thelox714, Feb 12, 2006
    #1
  2. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    First edit out your serial no, it starts with 1A20 XXXX XXXX XXXX

    Your Nero is way behind, update to latest 6.6.1.4 from Nero site

    You dont have a lot of free memory, dont multitask while burning, close down all unnecessary progs including spyware

    You are burning too close to edge of disc, set target at 4300

    try burning at 4X

    your burner doesnt like ypur media, try Verbatim or Taiyo Yuden




     
    gwendolin, Feb 12, 2006
    #2
  3. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @thelox714
    Here's few more for ya!
    Turn this back on to dma - here's link if needed:
    http://home.comcast.net/~bbmayo/checking DMA.pdf
    Your burning with an eternal drive? - and Nero can't fully recognize the drive. The Nero update should help this. If you have shrink and autoburn w/ nero - update to version 6.6.0.18. Here's a link for that one:
    http://httpdl2.usw.nero.com/Nero-6.6.0.18.exe
    If not the case then update to the version gwen lists.
    This is quality stuff - manufacturer for Verbatim and owns them too!
    So since your drive isn;t fully recognized can't tell if you have the latest firmware or not. Make sure it's up to date.
    [/quote] File 'Drivers\CDRALW2K.SYS':[/quote]
    Roxio and Nero do not play well together. Uninstall Roxio then run the zapper to make sure all is clear. Here's link:
    http://www.microadvantage.net/downloads/zapper60.zip

     
    Last edited: Feb 12, 2006
    binkie7, Feb 12, 2006
    #3
  4. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    @binkie7, I know the MMC discs should be good and I thought it strange re medium error. Where do you find log file for Nero6, I have 7 and apparently its different to 6. Cheers
     
    gwendolin, Feb 12, 2006
    #4
  5. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @Gwen
    Credit brobear for posting that in another thread. Here's a thread that needs the previous 7 version. Can you post a link to it there? I couldn't find one.
    http://forums.afterdawn.com/thread_view.cfm/1/301916#1740317
    thelox714 should be okay w/ the media - just needs to sort a few things out that we posted.
     
    Last edited: Feb 12, 2006
    binkie7, Feb 12, 2006
    #5
  6. gwendolin

    gwendolin Senior member

    Joined:
    Jun 29, 2005
    Messages:
    7,447
    Likes Received:
    0
    Trophy Points:
    116
    Last edited: Feb 12, 2006
    gwendolin, Feb 12, 2006
    #6
  7. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Many tks Gwen! Bookmarking this!

    @thelox714
    Any luck yet?
     
    binkie7, Feb 12, 2006
    #7
  8. thelox714

    thelox714 Regular member

    Joined:
    Apr 16, 2005
    Messages:
    1,220
    Likes Received:
    0
    Trophy Points:
    46
    ok guys.. thank you for the help....
    i have burned on this before.. with some ty's..

    yes.. it is an external usb. its my gf's machine. she's got a 17 inch toshiba laptop. i wont be able to do anything til tuesday. but i will keep you guys posted.
    i'll do those things that you suggested.

    have burned verbs and ty's on this drive. its strange that it would be the media. but we'll see.. it may be that those other issues are screwing all this up..

    thanks again.

    p.s.: i will keep you posted.
     
    thelox714, Feb 13, 2006
    #8
  9. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @thelox714
    That's my thinking too. Let's us know what happens - good,bad or otherwise!
     
    binkie7, Feb 13, 2006
    #9
  10. thelox714

    thelox714 Regular member

    Joined:
    Apr 16, 2005
    Messages:
    1,220
    Likes Received:
    0
    Trophy Points:
    46
    ok guys.. here's some funny stuff..
    i did the update on the nero.. i did the dma thing.. they were fine.

    so i burn some maxells at 2.4x.. dvdr+w.. that burned fine.. burns very nice actually..
    i went to some verbatims dvd-r 8x.. burned it at 4x.. and it screws up.. again.. this isn't my machine. i'll get a hold of some of my ty's.. this thing may be picky..

    here's the error log.. i'm getting better at reading this.. but in case i'm missing something... may not like verbs
    here we go..

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM
    Nero Version: 6.6.0.18
    Internal Version: 6, 6, 0, 18e
    (Nero Express)
    Recorder: <DVDRW USB 16X> Version: U089 - HA 3 TA 0 - 6.6.0.18
    Adapter driver: <> HA 3
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.18
    Adapter driver: <d347prt> HA 2

    === Scsi-Device-Map ===
    DiskPeripheral : IC25N080ATMR04-0 atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    MATSHITA DVD-RAM UJ-820S D: CDRom0
    Generic DVD-ROM E: CDRom1
    DVDRW USB 16X F: CDRom2
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 510MB (523244kB)
    Free physical memory: 108MB (111032kB)
    Memory in use : 78 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    14.2.2006
    Burn DVD Image
    11:37:10 PM #1 Text 0 File Reader.cpp, Line 127
    Reader running

    11:37:10 PM #2 Text 0 File Writer.cpp, Line 122
    Writer DVDRW USB 16X running

    11:37:10 PM #3 Text 0 File Burncd.cpp, Line 3233
    Turn on Disc-At-Once, using DVD media

    11:37:10 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
    Last possible write address on media: 2298495 (510:46.45, 4489MB)
    Last address to be written: 2285942 (507:59.17, 4464MB)

    11:37:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
    Write in overburning mode: NO (enabled: CD)

    11:37:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
    Recorder: DVDRW USB 16X, Media type: DVD-R
    Disc Manufacturer: MCC 02 - RG20
    Disc Application Code: 64, Disc Physical Code: 193

    11:37:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    11:37:10 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2285943 (2285943) = #2285943/507:59.18
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285943 blocks [DVDRW USB 16X]
    --------------------------------------------------------------

    11:37:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    Prepare recorder [DVDRW USB 16X] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681611264, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2285943 | lead-out | 1 | 0x41 | 0x00

    11:37:10 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
    Caching of files started

    11:37:10 PM #11 Text 0 File Burncd.cpp, Line 4122
    Cache writing successful.

    11:37:10 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
    Caching of files completed

    11:37:10 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    11:37:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    11:37:10 PM #15 Text 0 File DVDR.cpp, Line 2571
    Recording mode: Sequential Recording Mode

    11:37:10 PM #16 Text 0 File Mmc.cpp, Line 21774
    Set BUFE: Super Link -> ON

    11:37:10 PM #17 Text 0 File DVDR.cpp, Line 2726
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    11:37:10 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 0 h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Start sector number of the current Border-Out: 0 h
    Start sector number of the next Border-In: 0 h
    Media Specific [16..63]:
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

    11:37:20 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
    23:37:20.859 - DVDRW USB 16X\H3 T0 : Queue again later

    11:38:19 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x070E0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    11:38:19 PM #21 CDR -1135 File Writer.cpp, Line 311
    Write error

    11:38:19 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    11:38:19 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    11:38:19 PM #24 Text 0 File DVDR.cpp, Line 2969
    EndDAO: Last written address was 1279

    11:38:19 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/22/2003 7:15:02 PM
    File 'Drivers\PXHELP20.SYS': Ver=2.02.60a, size=17232 bytes, created 8/27/2003 1:02:00 AM (Prassi/Veritas driver for win 2K)
    File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 8/22/2004 4:31:48 PM (Adapter driver for src)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    edit: i realize i didnt run the zapper for roxio before the burns.. but then the maxell wouldnt have burned correctly...

    here is what video help says about the burner itself. there is a comment about flashing this with benq firmware.. but i dont want to run the risk of screwing up the drive.

    http://www.videohelp.com/dvdwriters...=&orderby=Name&hits=25&Search=Search&country=

     
    Last edited: Feb 14, 2006
    thelox714, Feb 14, 2006
    #10
  11. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @thelox714
    I never crossflashed by drives - if it doesn't work the problem is you may fry your drive. So the choice is yours.
    You can register at i/o magic's site and I think you can then check for the current firmware - imo that's the better option. Hopefully they have updated firmware for this drive that will sort it out!
    Nothing really out of line in the log except your drive is not liking those verb's. What a shame - in my experience mcc has been great!
     
    binkie7, Feb 15, 2006
    #11
  12. lesstjake

    lesstjake Regular member

    Joined:
    Jan 16, 2006
    Messages:
    124
    Likes Received:
    0
    Trophy Points:
    26
    someone in this thread mentione dsomething about burning too close to the end of the disc and trying to stay around 4300. I haven't really been paying much attention to where its burning too. If all my burns are succesful should i worry? Or will I find a not nice suprise at the end of my movies? (I use taiyo yudens)
     
    lesstjake, Feb 15, 2006
    #12
  13. arniebear

    arniebear Active member

    Joined:
    Jan 2, 2005
    Messages:
    7,191
    Likes Received:
    0
    Trophy Points:
    96
    If you are using Taiyo Yudens you should not find a surprise at the end, they are one or the best media. Staying away from the edge is usually recommended for the less than quality media such as Memorex and other CMC Mag media.
     
    Last edited: Feb 15, 2006
    arniebear, Feb 15, 2006
    #13
  14. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @lesstjake
    I rarely reduce my target size & mainly use Taiyo. Arniebear's right - no surprises - perfect playback.
     
    binkie7, Feb 15, 2006
    #14
  15. lesstjake

    lesstjake Regular member

    Joined:
    Jan 16, 2006
    Messages:
    124
    Likes Received:
    0
    Trophy Points:
    26
    good, my OCD is at peace for the moment
     
    lesstjake, Feb 15, 2006
    #15
  16. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @lesstjake
    LOL - not to worry than - your in good hands w/ taiyo yuden!
     
    binkie7, Feb 15, 2006
    #16
  17. thelox714

    thelox714 Regular member

    Joined:
    Apr 16, 2005
    Messages:
    1,220
    Likes Received:
    0
    Trophy Points:
    46
    i really dont want to do this.. i will try the ty's on this.. i have checked their site and made sure i had the latest firmware.. and it is pissing me off that i cant burn my luvely mccs.
    i believe office max or best buy is having the sale on the sony discs.. if i find the mijs.. i will pick those up..
    on a side note.. my gf.. now also has a new G5 iMac.. luving this thing.. i have a mac mini at home with an external lacie.. luv that thing.. this new imac does have a nice pioneer drive that will booktype.. luvs my verbs..
    here is the link to the drive in the imac
    http://www.pioneerelectronics.com/p...B,00.html?compName=PNA_ProductDetailComponent

    i will check to see if the other one will burn the TY's.. i'm thinking its partial to ricohs.. (so far) it did burn the maxell rw+. again.. that drive doesnt booktype so there's no use for the +. worse case scenario.. i'll burn the ty / sony's on her new mac..

    i will keep you updated on what media it does take
     
    thelox714, Feb 15, 2006
    #17
  18. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    @thelox714
    I don't blame on the crossflash - other members here do it - I'm just not that comfortable with it. Some do it to make their drive booktype but I have drives that will do this so no need for me.
    Keep us posted! Have you tried those verbs in any other burner?
    Best Buy is having a sale think it's either sony or fuji 25 for 7.99.
     
    binkie7, Feb 16, 2006
    #18
  19. thelox714

    thelox714 Regular member

    Joined:
    Apr 16, 2005
    Messages:
    1,220
    Likes Received:
    0
    Trophy Points:
    46
    oh yes.. i have burned those verbs on my eternal lacie.. burned a few in an imac last night.. its a pioneer k05 drive..

    its sony at 14.99 50 pack at best buy.
    50 pack of verbs at office max at 14.99 (got some of those last week)

    i'll keep ya posted..


     
    thelox714, Feb 16, 2006
    #19
  20. binkie7

    binkie7 Moderator Staff Member

    Joined:
    Feb 12, 2005
    Messages:
    17,588
    Likes Received:
    0
    Trophy Points:
    116
    Whew! For a minute there I was thinking oh no not mcc turning into the next cmc :0)
     
    binkie7, Feb 16, 2006
    #20
Page 1 of 2

Share This Page