Hi lads i just bought openbox x5. I am having problem with the cccam client setup. I have done everything but it say scrambled channels even when it shows online. Can anyone help me pls.
hi i had the same problem when using the remote control to input the line but then i loaded it using a usb stick and it worked straight away hope this helps
i had the same problem so i made a cccam.cfg file on notepad on my computer saved the cline on there put it on a usb then uploaded it via usb under the cccam section menu rebooted and started working
Hey mate... Did u ever find an answer to ur issue? I have just bought the x5 and I am having the same issue
i there, i have just bought the openbox x5, and im having problems putting my line in, i dont know how to put them in through usb, can anyone help please in how to do this as ive only ever put them in by remote beforehand, thank you
copy the line detail and put it into a txt doc, past it and call the doc CCAM.CFG, load to a USB, go to the box menu and load the cline, if any digit is wrong it wont work, Menu -> Network Local Settings and select CCcam Plug Setting and click the OK button Now select CCcam,cfg [CCcam Plug] and click the OK button, you should then see a check mark or tick appear,indicating you have selected the file, if there is no tick shown, then you have not selected anything, and nothing will be installed. Click yellow button and it should read the file, Now highlight each cline you wish to activate, by clicking the OK button a tick will appear next to each cline you have activated.
I got a similar problem just that i can watch a channel for about 30 seconds and then a message comes up saying Scrambled Channel and the screen turns black, if i switch to any different channels it still does the same thing.
my openbox x5 give me scrambled channel. followed the pakcu video on youtube still does not work. the youtube, vod and astro radio channel works. Any suggestion? update to latest firware? current is 27mar13. Appreciate your help.
There is 2 ways to input the line, through usb or through remote control "on computer open notepad copy n paste the line details and save as cccam.cfg,onto usb" insert usb into box for usb setup: press menu system set up press ok on Access control press ok on CCcam client setup press ok on update files by usb CCcam.cfg is already highlighted in red, press red button to load screen message will confirm load success or load fail press exit to go back a page if load was successful press ok on CCcam.cfg edit enter code 0000 press ok on CCcam edit you should now see the line you just added press ok and a tick at the end will appear under active to confirm selected press blue button (message connects to server please wait) Status will now be On-line To setup by remote press menu system set up press ok on Access control press ok on CCcam client setup press ok on CCcam.cfg edit enter code 0000 press ok on CCcam edit press the red button to edit next line with "empty" in it Single server setup page will appear Active server: ignore IP(DNS): enter address from line eg what.ever.com Port: enter first set of numbers from line eg 05151 ID: enter next set of numbers & letters from line Password: enter last set of numbers & letters from line Protocol: use right arrow to change from Newcamd to CCcam press exit button you should now see the line you just added press ok and a tick at the end will appear under active to confirm selected press blue button (message connects to server please wait) Status will now be On-line you should now see the line you just added press ok and a tick at the end will appear under active to confirm selected press blue button (message connects to server please wait) Status will now be On-line you are now all set up, you get scrambled channels it because on this box it needs satellite setup page setup correctly these settings vary depending on your location im in process of testing different setting, ive tried lnb frequency and transponder numbers from dreambox and openbox S11 but some channels works and some dont Im in Birmingham UK and have tried satellite: 19.2E Astra 1 23.5E Astra 3A 28.2E Freesat-Astra 2 33.0E Eurobird 3 but I need to know the correct frequency and transponder numbers for these satellites and which is the best satellite to use
hi, thanks for the guide.. for..."on computer open notepad copy n paste the line details and save as cccam.cfg,onto usb" which line are you referring to please? what line? thanks
please help me ! how i enter BISS KEY editop and how to open BISS KEY chanels on OPENBOX Z5, For example: IDMAN AZERBAIJAN is BISS KEY chanels
