Pioneer 107D Firmware update to 118 failed. Now no Kernel.. HELP!

Discussion in 'DVD / Blu-ray drives' started by sonic67, Aug 14, 2004.

  1. sonic67

    sonic67 Member

    Joined:
    Aug 14, 2004
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    I tried to update the firmware on my Pioneer 107D with the patched 118 revision (116 previous) and the DVRFlash says no Kernel and stops. Here's what it displayed:

    Commandline:
    DVRFlash -v E: R7143107.118

    Reading firmware 'R7143107.118'...
    firmware is of Normal type <Pioneer DVD-RW DVR-107D 1.18 >

    Drive Information:
    Description - PIONEER DVD-RW DVR-107D
    Firmware Rev. - 0000
    Firmware Date - 00/00/00
    Manufacturer - PIONEER
    ! Drive is in kernel mode !

    Additional Drive Information:
    Interface type - ATA
    DVR generation - 0007
    Kernel type - GENERAL
    Kernel version - 0002

    Firmware and Drive type mismatch
    If you want to convert your drive, you need to suppy both Kernel and General


    I cannot eject the drive door and after a reboot, the drive shows up in My Computer as a CD Drive. Device Manager still shows it as a Pioneer DVD-RW DVR-107.

    I ran Nero Info Tool and it shows:

    Type: CD-ROM Drive
    Firmware Version: 0000
    Buffer Size: 200 KB
    Date: 00-00-00
    Serial Number: ?

    What can I do to revive the drive and get it back working again?

    MANY Thanks!

    Sonic
     
    Last edited: Aug 14, 2004
  2. sonic67

    sonic67 Member

    Joined:
    Aug 14, 2004
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Anyone out there who can comment? Is my drive toast? I need to make some important DVD-R's in the next couple of weeks for work and I either:

    A: Need to correct the problem with this drive

    B: Buy a new one and live with the fact that the firmware glitch killed my drive

    Thanks!!!
     
    Last edited: Aug 15, 2004
  3. sonic67

    sonic67 Member

    Joined:
    Aug 14, 2004
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Well, some progress & success (sort of). I flased the kernel and firmware for .116 and the drive came back to life & will burn again.

    It is no longer shown in My Computer as a DVD-RW Drive. It is shown as a CD-ROM. I opened Nero 6 and it is correctly identified as E: PIONEER DVD-RW DVR 107. It is also correct in Device Manager. What do I need to do in order to get it back correctly in My Computer?

    Sorry for all the stupid Newbie posting, I just need a little help and I'm back in business.

    Thank you VERY much!

    Sonic
     
    Last edited: Aug 15, 2004
  4. sonic67

    sonic67 Member

    Joined:
    Aug 14, 2004
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Well, all is well and back to normal. After performing a Windows Update & two reboots, the drive is (semingly) functioning correctly and is back in My Computer as DVD-R Drive E:

    I hope this info may help someone else who may experience a problem.

    Sonic
     

Share This Page