Pioneer A108 not burning higher then 2X

Discussion in 'DVD / Blu-ray drives' started by akira007, Aug 8, 2005.

  1. akira007

    akira007 Member

    Joined:
    Dec 15, 2004
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    I have done the latest firmware upgrade (1.14) from Pioneers web page and I dont see a difference. It still says it's burning at 2X to 2.9X. It doesn't matter which media (SONY -R/+R, TDK -R/+R, Philips -R
    Any one have a clue to what is wrong, more upgrades CPU settings etc?
     
    akira007, Aug 8, 2005
    #1
  2. StanH1000

    StanH1000 Regular member

    Joined:
    May 19, 2004
    Messages:
    477
    Likes Received:
    0
    Trophy Points:
    26
    Check to see id drive is running in DMA or PIO mode. If in PIO it could explain slow burning. In Device Manager, IDE channels, drive properties, Check enable DMA for each drive and reboot. If the burner goes back to Pio would have to disable/remove the IDE channel that the drive is on from the Device Manager. Then reboot and windows will find it again as "new hardware" but now with DMA enabled.
     
    StanH1000, Aug 9, 2005
    #2

Share This Page