Hi i just bought a pioneer DVR 109 (firmware 1.17) dvd writer. i tested to burn a backed up dvd, no problem with that.I wanted to clear my HDD's to do a format and burn all my avi, mpeg, dix,... to one dvd. The disk starts burning and then i get the "Could not perform end of Disc-at-once", communication failure error. I'm using Nero 6.6.0.8a and i'm using OPTODISC (OR4) media. this is the nero log: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00 ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 27/02/2005 11:39:05 Nero Version: 6.6.0.8 Recorder: <PIONEER DVD-RW DVR-109> Version: 1.17 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <atapi> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic STEALTH DVD >Version: - HA 3 TA 0 - 6.6.0.8 Adapter driver: <st3wolf> HA 3 === Scsi-Device-Map === DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 1 DMA: On CdRomPeripheral : PIONEER DVD-RW DVR-109 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248B atapi Port 1 ID 1 DMA: On DiskPeripheral : Maxtor 6Y120M0 YAR5 SI3112r Port 2 ID 0 DMA: Off CdRomPeripheral : Generic STEALTH DVD st3wolf Port 3 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-109 D: CDRom0 SAMSUNG CD-R/RW SW-248B H: CDRom1 Generic STEALTH DVD M: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 528MB (541324kB) Memory in use : 48 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.3.2005 ISO compilation 17:29:29 #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 17:29:29 #2 Text 0 File Reader.cpp, Line 127 Reader running 17:29:29 #3 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-109 running 17:29:29 #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 17:29:29 #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 17:29:30 #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2140623 (475:41.48, 4180MB) 17:29:30 #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 17:29:30 #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: PIONEER DVD-RW DVR-109, Media type: DVD+R Disc Manufacturer ID: OPTODISC, Media Type ID: OR4, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 17:29:30 #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:29:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2140624 (2140624) = #2140624/475:41.49 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2140624 blocks [PIONEER DVD-RW DVR-109] -------------------------------------------------------------- 17:29:42 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4383997952, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2140624 | lead-out | 1 | 0x41 | 0x00 17:29:43 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 17:29:43 #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 17:29:43 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 17:29:43 #15 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 17:29:43 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:31:09 #17 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-109 > start writing Lead-Out at LBA 2140624 (20A9D0h), lenght 0 blocks 17:31:10 #18 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:31:10 #19 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 36.4x (50.238 KB/s) 17:31:10 #20 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5.540 KB/s) 17:31:10 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 17:31:10 #22 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: OPTODISC Media type ID: OR4 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 4F 50 54 4F 44 - 49 53 43 4F 52 34 00 38 ...OPTODISCOR4.8 23 54 37 18 02 68 72 02 - B0 67 15 15 0B 0A 08 08 #T7..hr..g...... 01 1B 1D 0B 0B 11 12 01 - 00 00 00 00 00 00 00 00 ................ 17:31:10 #23 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 17:31:11 #24 Text 0 File Cdrdrv.cpp, Line 1287 17:31:11.984 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:25 #25 Text 0 File Cdrdrv.cpp, Line 1287 17:31:25.625 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:26 #26 Text 0 File Cdrdrv.cpp, Line 1287 17:31:26.125 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:26 #27 Text 0 File Cdrdrv.cpp, Line 1287 17:31:26.468 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:26 #28 Text 0 File Cdrdrv.cpp, Line 1287 17:31:26.656 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:26 #29 Text 0 File Cdrdrv.cpp, Line 1287 17:31:26.687 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:26 #30 Text 0 File Cdrdrv.cpp, Line 1287 17:31:26.718 - PIONEER DVD-RW DVR-109\H1 T0 : Queue again later 17:31:31 #31 SCSI -1024 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04080000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x3A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x08 0x03 17:31:31 #32 CDR -1024 File Writer.cpp, Line 311 Communication failure 17:31:31 #33 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 17:31:31 #34 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 17:31:34 #35 SCSI -1176 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x72 0x03 17:31:34 #36 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 17:31:34 #37 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 17:31:34 #38 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5.540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00 File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28/10/2003 11:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 21:59:44 (Adapter driver for rec) File 'Drivers\st3wolf.sys': Ver=3.33.0.0, size=99360 bytes, created 27/04/2003 10:43:06 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
iv'e tried everything, format, updating ide drivers, upgraded my writer firmware to 1.40 (released on 24/03/05) exactly for the "disk-at-once" error.. :-s no luck with that either. So i went to the store, where they tested it with their media and mine and it worked fine. I even got a new writer just in case, but the problem remains. i dit find some info at nero homepage, nothing helped. http://www.nero.com/en/FAQs_Error_Messages.html#12
here is the nero log from my system: 1A22-020K-0530-1349-1219-9976 Windows 98 4.10 IA32 WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 23/04/99 22:22:00 ahead WinASPI: File 'C:\PROGRAM FILES\AHEAD\NERO\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/04 17:35:34 Nero Version: 6.6.0.8 Recorder: <PIONEER DVD-RW DVR-105> Version: 1.33 - HA 1 TA 0 - 6.6.0.8 Adapter driver: <ESDI_506> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <VOBID InstantDrive CD >Version: 14 - HA 0 TA 0 - 6.6.0.8 Adapter driver: <vobid> HA 0 PIONEER DVD-RW DVR-105 (Target 0, E: Autoinsert On, DMA Off, Disconnect On, SyncDataXfer Off VOBID InstantDrive CD (Target 0, D: Autoinsert On, DMA ?, Disconnect Off, SyncDataXfer Off Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 383MB (392632kB) Free physical memory: 17MB (17752kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.3.2005 ISO compilation 21:44:15 #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:44:15 #2 Text 0 File Reader.cpp, Line 127 Reader running 21:44:15 #3 Text 0 File Writer.cpp, Line 122 Writer PIONEER DVD-RW DVR-105 running 21:44:15 #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 21:44:15 #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 21:44:15 #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 179267 ( 39:50.17, 350MB) 21:44:15 #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 21:44:15 #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: PIONEER DVD-RW DVR-105, Media type: DVD-RW Disc Manufacturer: MCC 01 - RW11n9 Disc Application Code: 64, Disc Physical Code: 214 21:44:15 #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:44:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 179264 (179264) = #179264/39:50.14 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 179264 blocks [PIONEER DVD-RW DVR-105] 1: TRM_DATA_MODE1 () 2 indices, index0 (0) not provided original disc pos #15 + 4 (4) = #19/0:0.19 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4 blocks [PIONEER DVD-RW DVR-105] -------------------------------------------------------------- 21:44:15 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [PIONEER DVD-RW DVR-105] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 367132672, ISRC "" 2: TRM_DATA_MODE1, 2048/0x00, FilePos 367132672 367132672 367140864, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 179264 | 2 | 0 | 0x41 | 0x00 179264 | 2 | 1 | 0x41 | 0x00 179268 | lead-out | 1 | 0x41 | 0x00 21:44:15 #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 21:44:15 #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 21:44:15 #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 21:44:15 #15 Phase 28 File dlgbrnst.cpp, Line 1832 Speed measurement started 21:44:15 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:44:15 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15 21:44:15 #18 SCSI -1183 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x054A5600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x08 (KEY_BLANK_CHECK) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x02 0xBB 0xA0 0x00 0x00 0x0A 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x08 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x00 0x00 21:46:09 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:46:09 #20 Text 0 File WriterStatus.cpp, Line 116 <PIONEER DVD-RW DVR-105 > start writing Lead-Out at LBA 4 (4h), lenght 0 blocks 21:46:09 #21 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 21:46:09 #22 SCSI -1183 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x054A5600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x08 (KEY_BLANK_CHECK) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0F 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x08 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x00 0x00 21:46:09 #23 Phase 29 File dlgbrnst.cpp, Line 1781 Speed measurement completed: 2.7x (3,742 KB/s) 21:46:09 #24 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 2x (2,770 KB/s) 21:46:10 #25 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:46:10 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #15): write at #15 21:46:10 #27 Text 0 File DVDMinusRW.cpp, Line 269 Perform 'Quick Format' (type 15h) to set disc in 'Restricted Overwrite Mode'. 21:46:10 #28 Phase 136 File dlgbrnst.cpp, Line 1832 Quick Format DVD-RW 21:47:09 #29 Phase 65 File dlgbrnst.cpp, Line 1832 Burn process started 21:47:09 #30 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode for Multisession 21:47:09 #31 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 21:47:09 #32 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 21:47:09 #33 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-RW (3), Part Version: 2 Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 80 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:47:09 #34 SCSI -1176 File Cdrdrv.cpp, Line 1181 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x02 0xBC 0x50 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x72 0x05 21:47:09 #35 CDR -1176 File ThreadedTransferInterface.cpp, Line 1765 Session fixation error 21:47:09 #36 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1765 Could not perform start of Disc-at-once 21:47:09 #37 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 2x (2,770 KB/s) Existing drivers: File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 23/04/99 22:22:00 File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 11/03/02 11:55:38 File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 17/03/05 20:59:02 File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 17/03/05 20:59:02 File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 17/03/05 20:59:02 File 'IoSubsys\vobIW.vxd': Ver=4, 0, 2, 4678, size=206027 bytes, created 28/01/03 23:03:10 File 'IoSubsys\cdrdrv.vxd': Ver=4, 0, 5, 270^, size=32860 bytes, created 28/01/03 18:24:20 File 'IoSubsys\asapi.vxd': Ver=5, 1, 0, 2, size=14581 bytes, created 01/09/98 12:33:10 File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 23/04/99 22:22:00 File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 23/04/99 22:22:00 File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69570 bytes, created 23/04/99 22:22:00 File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 23/04/99 22:22:00 File 'IoSubsys\vobid.mpd': Ver=1, 1, 0, 23, size=27212 bytes, created 20/08/03 16:12:12 (Adapter driver for src) Registry Keys:
YES!! problem solved! It seems to had a problem with the power supply and ide cables. I connected the drive with a single power supply and i used a 40 wire ide cable, only connected to the drive and no other hardware! seem to work now!
