I have Driver HL-DT-ST DVDRRW GWA-4164B On my Nero Program the following Recorders show up: Image Recorder (DVD) Image Recorder CD-R/RW HL-DT-ST DVD RRW GWA 4164B DVD HL-DT-ST DVD RRW GWA 4164B CR-R/RW I can not make a Data DVD, either DVD+R or DVD-R. I am able to make a CD-R or CD-R/W. I was told that DVD's have a greater capacity and have bought many DVD+R and DVD-R to find out that they do not work. When I burn these DVD's with Nero Express I get a window asking to insert the disc to be written on: Disk Requirements: DVD+R/RW, DVD-R/RW, DVD+R9, Double Layer. When I insertet a DVR+R the burn session failed at 16.620KB's. When I put a DVR-R in the CD-ROM the shute opens to eject the disk.
Go to one of these locations and find your Nero history log, post it so we can take a look Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory VISTA: …. Desktop/Your Comp Name/App Data/Roaming/Ahead/Nero History
Gwendolin, I am sorry I am trying hard here, but not sure how I can reply, hope this is correct. You instructed me to go to my Programm Files and I only have All Programs.Under All Programs I have Nero Program, Back-Up, CD-DVD Speed, Cover Des., Nero Drive Speed, Nero Express, Nero Information. I do not see anything about History. Elly
Which version of Nero are you using. BTW: I am logging off for a few hours, hopefully someone will come along and help, good luck.
I found the Nero History Log now, however it is many pages long and I do not know how to forward to you. Can you please advise. Thanks Elly
I found the history log but I do not know how to post the log here. I looked for the Help on your Forum but can not find it. Can you please advise me how I can get the history to you. Thank you and I apologize for being so uninformed. Elly
Drag and highlight, right click, copy, open a reply, right click, paste, remove serial number. Check out what LOCOENG has to say: http://my.afterdawn.com/locoeng/blog_entry.cfm/385 EDIT: added link.
Attached is the Nero History Log. Hope you can help me! Thankful for ever Elly Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 124MB (127016kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.1.2008 ISO compilation 12:07:19 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:07:19 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 12:07:19 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:07:19 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 12:08:57 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845 Aborted by user 12:08:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 12:08:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 12:08:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 123MB (126384kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.1.2008 ISO compilation 12:10:40 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:10:40 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 12:10:40 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:10:40 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 12:10:47 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845 Aborted by user 12:10:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 12:10:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 12:10:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 187MB (191756kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.1.2008 ISO compilation 12:46:25 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:46:25 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 12:46:25 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 12:46:25 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 12:47:01 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845 Aborted by user 12:47:01 AM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 12:47:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 12:47:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 144MB (147896kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.1.2008 ISO compilation 1:50:13 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:50:13 AM #2 Text 0 File Reader.cpp, Line 118 Reader running 1:50:13 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:50:13 AM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 1:50:28 AM #5 Phase 40 File dlgbrnst.cpp, Line 1845 Aborted by user 1:50:28 AM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 1:50:28 AM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 1:50:28 AM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert the disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 89MB (91480kB) Memory in use : 76 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.1.2008 ISO compilation 4:22:56 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:22:56 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 4:22:56 PM #3 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRRW GWA-4164B running 4:22:56 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 4:22:57 PM #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 4:22:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 66799 ( 14:50.49, 130MB) 4:22:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 4:22:57 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 4:22:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:22:57 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 66800 (66800) = #66800/14:50.50 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- 4:24:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 136806400, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 66800 | lead-out | 1 | 0x00 | 0x41 4:24:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 4:24:20 PM #13 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 4:24:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 4:24:20 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 16x (22,160 KB/s) 4:24:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:24:21 PM #17 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:24:21 PM #18 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:17,867 (17867ms) -> OK 4:24:21 PM #19 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: No 4:25:38 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x094C0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 4:25:38 PM #21 CDR -1135 File Writer.cpp, Line 304 Write error 4:25:38 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:25:38 PM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 4:25:39 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 4:25:39 PM #25 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 4:25:39 PM #26 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 144MB (147856kB) Memory in use : 62 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.1.2008 ISO compilation 4:40:46 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:40:46 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 4:40:46 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 4:40:46 PM #4 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 4:40:46 PM #5 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 66799 ( 14:50.49, 130MB) 4:40:46 PM #6 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 4:40:46 PM #7 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: , Media Type ID: , Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 4:40:46 PM #8 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:40:46 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 66800 (66800) = #66800/14:50.50 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 66800 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 11:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.03 - HA 4 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 4 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: Off DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164 E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 128MB (131328kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.1.2008 ISO compilation 4:44:36 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 4:44:36 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 4:44:36 PM #3 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRRW GWA-4164B running 4:44:36 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 4:44:36 PM #5 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 4:44:36 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 15295 ( 3:23.70, 29MB) 4:44:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 4:44:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 4:44:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:44:36 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 15296 (15296) = #15296/3:23.71 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 15296 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- 4:45:08 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 31326208, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 15296 | lead-out | 1 | 0x00 | 0x41 4:45:08 PM #12 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 4:45:09 PM #13 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 4:45:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 4:45:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 12x (16,620 KB/s) 4:45:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 4:45:09 PM #17 Text 0 File Cdrdrv.cpp, Line 8120 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:45:09 PM #18 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:15,959 (15959ms) -> OK 4:45:09 PM #19 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: No 4:46:50 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 4, TA 0, LUN 0, buffer 0x09320000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x80 4:46:50 PM #21 CDR -1135 File Writer.cpp, Line 304 Write error 4:46:50 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:46:50 PM #23 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 4:46:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 4:46:50 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 12x (16,620 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Owner Windows XP 5.1
Your version of Nero is really old, try to update to this version 6.6.1.15 http://www.filehippo.com/download/7717bb2aa35a8a6b405b8322e5dfe50b/download/ DMA needs to be on, heres a guide to turn back on http://forums.afterdawn.com/thread_view.cfm/260038 These arent good quality discs, try Verbatim or Sony (made in Japan) You will also need to update your firmware from here http://support.fujitsu-siemens.com/...wareGUID=CB38A987-26EA-45FB-9791-82B279E0A39F Slow your burn to 4 speed
Not to intrude, but memory seems low. Edit out your serial number before someone cuts and pastes it into their own computer, or posts it on one of the serial number sites. There are numerous times it shows up in your log, (at least 6) Use the find function of your browser to get each instance, search for 1A20 and edit them out.
Thank you so much. I will follow your advice but need some more explanation. 1. I will update to version 6.6.1.15 with the link you have provided 2. How do I turn the CdRomPeripheral: HL-DT-ST DVDRRW GWA 4164B atap Port 4 DMA: Off? Where do I find it? 3. Where do I find the DMA to turn off? 4. Quote: Disc. Manufacturer ID:MBIPG101, Media Type ID: RO5, Product revision number:1 Are these the disks I have used and I should use Verbatim or Sony (made in Japan) in future? Quote: Recorder:<HL-DT-ST DVDRRW GWA-4164> Version:1.03 What do you mean by that? 5. I will update the firmware from the link provided by you. 6. What do you mean by slow your burn to 4 speed? Is that after I done the update etc. and how do I do that? Gwendolin, also in what order should I do those suggested things? Should I do them in the order you listed them? Thank you again for your prompt reply. Elly
The discs to use in future are verbatim or sony Just click on this link to update your firmware http://support.fujitsu-siemens.com/Downl...91-82B279E0A39F (link 1) This link will show you how to turn your DMA on (at present it is off) http://forums.afterdawn.com/thread_view.cfm/260038 (link 2) You are burning your DVDs at 16 speed....slow the burn speed to 4 So basically all you have to do is 1. Update your firmware from the above link 1 2. Turn on your DMA from the other link 2 provided 3. Reduce your burn speed to 4
Thank you again. I did not realize that I only have to click on the links. I have now downloaded the firmware from fuijitsu-siemens (link 1) and received a window with 2 files/folders in the temporary file, which in the meantime I can not find. Do you think the firmware installed? I did not save it I ran it. I also have opened the link from "Alkohol" but it seems the first picture does not show. There is a red X for the first picture. Gwendolin, how do I reduce the burn speed to 4? I also looked at the update to version 6.6.1.15 and it says: Nero is a flexible, reliable, and easy-to-use application designed to write both data and CD audio to CD-R and CD-RW discs. It supports ISO 9660 image... more info... Would this update allow me to burn my Data and Pictures on a DVD+ and DVD+RW? Above it only mentions CD's? You people are extremley helpful and I appreciate your help and consideration. Thank you Gwendolin.
Yes this version will allow you to burn both DVDs and CDs....it's a little hard to describe how to reduce your burn speed as it depends on which particular application of Nero you are using....heres a pic ...but I am using Nero 7 and the application is NeroVision
Thank you. Can I change the speed after I download the updates to Nero 6.6.1.15. I used Alkohols Guide re: DMA needs to be off and have discovered that I have 3 of each Primary IDE Channel and Secondary DE Channel. Should I uninstall 2 of them each. Actually one of them in the Seconday catergory has PIO Mode and needs to be uninstalled, I think, anyway. I downloaded the firmware but do not know if it is in effect. How can I verify? I think I am getting paranoid now. All I know is, after the download I got a screen up Tem;. Folder with 2 files, and I am not sure if I should have installed from there. Can you please explain to me what I should do. Elly
Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 15295 ( 3:23.70, 29MB) Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 66799 ( 14:50.49, 130MB) 3 and 14 minutes of video to dvdr? you have many logs uninstall all device controllers then and reboot pc, then check dma is this a made up pc built by you? or untouched shop bought one? cant see any files locations? like c:\movie files\matrix.avi - bla bla
I just saw your post in my shoutbox, sorry don't look there much, As far as physical memory goes, this is the amount of memory in your system, Nero recommends at least 512 Mbytes for burning, if you are multitasking, (I.E. surfing the net, having other programs open etc.) while you are burning this will also eat up a lot of your free memory. two options, 1. buy more memory, I suggest Newegg.com or 2. don't multitask and close down any open programs that aren't necessary to run your computer, disconnect from the net, turn off your anti virus and spyware programs, (only after disconnected from the net) Use Windows Task Manager to shut down unneeded programs. This should help out a bit.