Over the weekend I was burning a movie when the power went out in the middle of my burn. As soon as I got everything set back up, the lights blinked again causing another outage in the middle of the burn. Now Nero is burning very, very slow and the buffer level is not moving at all. I waited about 20 minutes for a burn last night and got a process failed message at the end of the burn. Are there any troubleshooting tips for me out there or tips on what I could do to get Nero back up and running. Thank in advance for any response.
Try go back to an earlier restore point before the outages. Also, check to see if 'DMA' remains on. Alternatively, post a log.
Try search for 'NeroHistory.log' inside the various Nero program folders (e.g. Nero, Nero Vision). P.S.: Remember to delete the serial no. before posting.
I attempted to locate nero and it's not in the program files or through explore but in the control panel only allowing me to Remove. What else can I try?
Found it I think: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 117MB (120628kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 5:40:22 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 5:40:22 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 5:40:22 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 369296 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 5:40:22 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 369296 = 369296, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 5:40:22 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 5:40:23 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 369295 ( 82:03.70, 721MB) 5:40:23 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 5:40:23 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 5:40:23 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:40:23 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 369296 (369296) = #369296/82:3.71 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 369296 blocks [ Image Recorder ] -------------------------------------------------------------- 5:40:23 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 756625408, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 369296 | lead-out | 1 | 0x00 | 0x41 5:40:23 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 5:40:23 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:43:29 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 369296 (5A290h), lenght 0 blocks 5:43:30 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:43:31 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 5:43:47 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 5:43:47 PM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 5:43:47 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 756625408 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=82:03.71 ( 369296) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\ 5:43:47 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 5:45:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 369295 ( 82:03.70, 721MB) 5:45:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 5:45:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 5:45:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 5:45:11 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 369296 (369296) = #369296/82:3.71 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 369296 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 5:45:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 756318208, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 369296 | lead-out | 1 | 0x00 | 0x41 5:45:11 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 5:45:11 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:45:11 PM #13 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:45:11 PM #14 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:24,728 (204728ms) -> OK 5:45:11 PM #15 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 5:48:03 PM #16 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 369296 (5A290h), lenght 0 blocks 5:48:04 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:48:08 PM #18 Phase 127 File dlgbrnst.cpp, Line 1836 Generating DVD high compatibility borders 5:48:23 PM #19 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:48:23 PM #20 Phase 129 File dlgbrnst.cpp, Line 1836 Generating DVD borders completed successfully 5:48:23 PM #21 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:48:23 PM #22 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 101MB (103880kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 4:34:00 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 4:34:00 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 4:34:00 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 486432 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 4:34:00 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 486432 = 486432, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:34:00 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 4:34:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 486431 (108:05.56, 950MB) 4:34:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 4:34:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 4:34:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:34:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 486432 (486432) = #486432/108:5.57 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 486432 blocks [ Image Recorder ] -------------------------------------------------------------- 4:34:01 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 996519936, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 486432 | lead-out | 1 | 0x00 | 0x41 4:34:01 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 4:34:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:37:36 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks 4:37:36 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:37:37 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 4:37:51 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 4:37:51 PM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 4:37:51 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 996519936 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=108:05.57 ( 486432) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\ 4:37:52 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 4:38:16 PM #5 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 486431 (108:05.56, 950MB) 4:38:16 PM #6 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 4:38:16 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:38:16 PM #8 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 4:38:16 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 486432 (486432) = #486432/108:5.57 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 486432 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 4:38:16 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 996212736, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 486432 | lead-out | 1 | 0x00 | 0x41 4:38:16 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 4:38:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:38:16 PM #13 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:38:16 PM #14 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:27,963 (207963ms) -> OK 4:38:16 PM #15 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 4:41:49 PM #16 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks 4:41:49 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:42:07 PM #18 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:42:07 PM #19 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:42:07 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) 4:42:42 PM #21 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 486431 (108:05.56, 950MB) 4:42:42 PM #22 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 4:42:42 PM #23 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:42:42 PM #24 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:42:42 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 996212736, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 486432 | lead-out | 1 | 0x00 | 0x41 4:42:42 PM #26 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 4:42:42 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:42:42 PM #28 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:42:42 PM #29 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:27,963 (207963ms) -> OK 4:42:42 PM #30 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 4:46:14 PM #31 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 486432 (76C20h), lenght 0 blocks 4:46:14 PM #32 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:46:32 PM #33 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:46:32 PM #34 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:46:32 PM #35 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 114MB (116984kB) Memory in use : 55 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 4:48:19 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 4:48:19 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 4:48:19 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 494176 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 4:48:19 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 494176 = 494176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:48:19 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 4:48:19 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 494175 (109:49.00, 965MB) 4:48:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 4:48:19 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 4:48:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:48:19 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 494176 (494176) = #494176/109:49.1 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [ Image Recorder ] -------------------------------------------------------------- 4:48:19 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1012379648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 4:48:19 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 4:48:19 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:54:57 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 4:54:57 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:54:58 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 4:55:15 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 4:55:15 PM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 4:55:15 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1012379648 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=109:49.01 ( 494176) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\ 4:55:16 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 4:55:41 PM #5 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 494175 (109:49.00, 965MB) 4:55:41 PM #6 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 4:55:41 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:55:41 PM #8 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 4:55:41 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 494176 (494176) = #494176/109:49.1 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 4:55:41 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 4:55:42 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 4:55:42 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:55:42 PM #13 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 4:55:42 PM #14 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:30,758 (210758ms) -> OK 4:55:42 PM #15 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 4:59:21 PM #16 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 4:59:21 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 4:59:40 PM #18 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:59:40 PM #19 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 4:59:40 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) 5:00:08 PM #21 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 494175 (109:49.00, 965MB) 5:00:08 PM #22 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 5:00:08 PM #23 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 5:00:08 PM #24 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:00:08 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 5:00:08 PM #26 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 5:00:09 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:00:09 PM #28 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:00:09 PM #29 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:30,758 (210758ms) -> OK 5:00:09 PM #30 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 5:03:43 PM #31 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 5:03:43 PM #32 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:04:02 PM #33 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:04:02 PM #34 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:04:02 PM #35 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) 5:05:25 PM #36 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 494175 (109:49.00, 965MB) 5:05:25 PM #37 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 5:05:25 PM #38 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 5:05:25 PM #39 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:05:25 PM #40 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 5:05:25 PM #41 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 5:05:25 PM #42 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:05:25 PM #43 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:05:25 PM #44 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:30,758 (210758ms) -> OK 5:05:25 PM #45 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 5:09:26 PM #46 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 5:09:26 PM #47 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:09:44 PM #48 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:09:44 PM #49 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:09:44 PM #50 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) 5:10:39 PM #51 SCSI -500 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 5:10:58 PM #52 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 494175 (109:49.00, 965MB) 5:10:58 PM #53 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 5:10:58 PM #54 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 5:10:58 PM #55 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:10:58 PM #56 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 5:10:58 PM #57 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 5:10:58 PM #58 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 5:10:58 PM #59 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 5:10:58 PM #60 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:30,758 (210758ms) -> OK 5:10:58 PM #61 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 5:14:58 PM #62 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 5:14:58 PM #63 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:15:17 PM #64 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:15:17 PM #65 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 5:15:17 PM #66 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 128MB (131260kB) Memory in use : 49 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 12:24:04 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 12:24:04 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 12:24:04 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2075360 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 12:24:04 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 2075360 = 2075360, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 12:24:04 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 12:24:04 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2075359 (461:11.34, 4053MB) 12:24:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 12:24:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 12:24:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:24:04 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2075360 (2075360) = #2075360/461:11.35 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075360 blocks [ Image Recorder ] -------------------------------------------------------------- 12:24:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4250644480, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2075360 | lead-out | 1 | 0x00 | 0x41 12:24:04 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 12:24:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:36:37 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks 12:36:37 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:36:38 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 12:36:50 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 12:36:50 PM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 12:36:50 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = -44322816 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=461:11.35 ( 2075360) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Pamela Jackson\My Documents\TempImage.nrg> 12:36:50 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 12:45:08 PM #5 SCSI -500 File Cdrdrv.cpp, Line 1187 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:45:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2075359 (461:11.34, 4053MB) 12:45:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 12:45:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 12:45:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 12:45:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 2075360 (2075360) = #2075360/461:11.35 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2075360 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 12:45:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4250337280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2075360 | lead-out | 1 | 0x00 | 0x41 12:45:27 PM #12 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 12:45:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:45:27 PM #14 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:45:27 PM #15 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 13:01,583 (781583ms) -> OK 12:45:27 PM #16 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 12:59:13 PM #17 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks 12:59:13 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 12:59:36 PM #19 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 12:59:36 PM #20 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 12:59:36 PM #21 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) 1:03:36 PM #22 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2075359 (461:11.34, 4053MB) 1:03:36 PM #23 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 1:03:36 PM #24 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 1:03:36 PM #25 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:03:36 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4250337280, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2075360 | lead-out | 1 | 0x00 | 0x41 1:03:36 PM #27 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 1:03:36 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:03:36 PM #29 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 1:03:36 PM #30 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 13:01,583 (781583ms) -> OK 1:03:36 PM #31 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 1:17:53 PM #32 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2075360 (1FAAE0h), lenght 0 blocks 1:17:53 PM #33 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:18:18 PM #34 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 1:18:18 PM #35 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 1:18:18 PM #36 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 57MB (59068kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 DVD-Copy over Image 3:20:14 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 3:20:14 PM #2 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 583904 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 3:20:14 PM #3 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 583904 = 583904, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3:20:14 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 3:20:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 583903 (129:45.28, 1140MB) 3:20:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 3:20:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 3:20:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:20:15 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 583904 (583904) = #583904/129:45.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 583904 blocks [ Image Recorder ] -------------------------------------------------------------- 3:20:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1196142592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 583904 | lead-out | 1 | 0x00 | 0x41 3:20:15 PM #11 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 3:20:16 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:20:16 PM #13 Phase 40 File dlgbrnst.cpp, Line 1531 Aborted by user 3:20:18 PM #14 Phase 68 File dlgbrnst.cpp, Line 1836 Burn process aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 18MB (18648kB) Memory in use : 92 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 DVD-Copy over Image 3:22:06 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 3:22:06 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 3:22:06 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 583904 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 3:22:06 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 583904 = 583904, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3:22:06 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 3:22:07 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 583903 (129:45.28, 1140MB) 3:22:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 3:22:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 3:22:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:22:07 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 583904 (583904) = #583904/129:45.29 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 583904 blocks [ Image Recorder ] -------------------------------------------------------------- 3:22:07 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1196142592, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 583904 | lead-out | 1 | 0x00 | 0x41 3:22:07 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 3:22:07 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:26:41 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x08 0xE8 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 3:26:48 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x08 0xE8 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 3:26:48 PM #16 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 3:26:48 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:26:49 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836 Burn process failed Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 11 Drive is autodetected - recorder class: DVD+R9 DL recorder CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 108MB (110800kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 3:31:18 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 3:31:18 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 3:31:18 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 494176 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 3:31:18 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 494176 = 494176, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 3:31:18 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 3:31:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 494175 (109:49.00, 965MB) 3:31:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 3:31:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 3:31:18 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:31:18 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 494176 (494176) = #494176/109:49.1 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [ Image Recorder ] -------------------------------------------------------------- 3:31:18 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1012379648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 3:31:18 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 3:31:18 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:38:52 PM #14 Text 0 File WriterStatus.cpp, Line 115 < Image Recorder > start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 3:38:52 PM #15 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:38:53 PM #16 Phase 121 File dlgbrnst.cpp, Line 1836 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 3:39:21 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 3:39:21 PM #2 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1633S running 3:39:23 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 1012379648 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150) 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0) 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=109:49.01 ( 494176) MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\ 3:39:23 PM #4 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 3:42:38 PM #5 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 494175 (109:49.00, 965MB) 3:42:38 PM #6 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 3:42:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD+R Disc Manufacturer ID: MAXELL, Media Type ID: 002, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 3:42:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 3:42:38 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) provided original disc pos #0 + 494176 (494176) = #494176/109:49.1 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 494176 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 3:42:38 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1012072448, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 494176 | lead-out | 1 | 0x00 | 0x41 3:42:38 PM #11 Phase 36 File dlgbrnst.cpp, Line 1836 Burn process started at 4x (5,520 KB/s) 3:42:39 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 3:42:39 PM #13 Text 0 File Cdrdrv.cpp, Line 8063 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: MAXELL.. Media type ID: 002 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 4D 41 58 45 4C - 4C 00 00 30 30 32 00 38 ...MAXELL..002.8 23 54 37 12 02 42 71 02 - 8C 68 15 15 0B 0B 08 08 #T7..Bq..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 3:42:39 PM #14 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 3:30,758 (210758ms) -> OK 3:42:39 PM #15 Text 0 File DVDPlusRW.cpp, Line 618 Start write address at LBA 0 DVD high compatibility mode: Yes 3:46:14 PM #16 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 494176 (78A60h), lenght 0 blocks 3:46:14 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:46:32 PM #18 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 3:46:32 PM #19 Text 0 File dlgbrnst.cpp, Line 1694 Set remaining time: 0:00,000 (0ms) -> OK 3:46:32 PM #20 Phase 37 File dlgbrnst.cpp, Line 1836 Burn process completed successfully at 4x (5,520 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 27MB (28336kB) Memory in use : 89 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.8.2005 DVD-Copy over Image 10:36:29 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 10:36:30 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 10:36:30 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 10:36:30 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 10:36:30 PM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 10:36:30 PM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2274687 (505:29.12, 4442MB) 10:36:30 PM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 10:36:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 10:36:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:36:30 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ] -------------------------------------------------------------- 10:36:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2274688 | lead-out | 1 | 0x00 | 0x41 10:36:30 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 10:36:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:50:30 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x22 0x41 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 10:50:35 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04CB1000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x22 0x41 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 10:50:36 PM #16 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 10:50:36 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:50:37 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836 Burn process failed Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 165MB (169396kB) Memory in use : 34 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2005 DVD-Copy over Image 6:38:47 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 6:38:47 AM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 6:38:47 AM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 6:38:47 AM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:38:47 AM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 6:38:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2274687 (505:29.12, 4442MB) 6:38:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 6:38:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:38:47 AM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:38:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ] -------------------------------------------------------------- 6:38:47 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2274688 | lead-out | 1 | 0x00 | 0x41 6:38:47 AM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 6:38:47 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:41:18 AM #14 Phase 40 File dlgbrnst.cpp, Line 1531 Aborted by user 6:41:21 AM #15 Phase 68 File dlgbrnst.cpp, Line 1836 Burn process aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 9:18:06 PM Nero version: 6.3.1.11 (Nero Express) Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.11 Adapter driver: <Virtual Device> HA -1 Drive buffer : CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 0 - 6.3.1.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CDRom0 SAMSUNG CD-R/RW SW-252S E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260096kB) Free physical memory: 122MB (125240kB) Memory in use : 51 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2005 DVD-Copy over Image 7:04:27 AM #1 Text 0 File Reader.cpp, Line 118 Reader running 7:04:27 AM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 7:04:27 AM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2274688 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 7:04:27 AM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 2274688 = 2274688, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 7:04:27 AM #5 Text 0 File Burncd.cpp, Line 3196 Turn on Disc-at-once, using DVD media 7:04:27 AM #6 Text 0 File DlgWaitCD.cpp, Line 244 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 2274687 (505:29.12, 4442MB) 7:04:27 AM #7 Text 0 File DlgWaitCD.cpp, Line 249 Write in overburning mode: FALSE 7:04:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 2107 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 7:04:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 410 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:04:27 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2274688 (2274688) = #2274688/505:29.13 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2274688 blocks [ Image Recorder ] -------------------------------------------------------------- 7:04:27 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4658868224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2274688 | lead-out | 1 | 0x00 | 0x41 7:04:27 AM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 7:04:28 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2345 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 7:05:47 AM #14 Phase 40 File dlgbrnst.cpp, Line 1531 Aborted by user 7:05:49 AM #15 Phase 68 File dlgbrnst.cpp, Line 1836 Burn process aborted Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 11/10/2004 5:30:18 PM File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 12/17/2004 7:09:48 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Dear pjack, Not sure if this is related, but if you check your various burn logs, you'll notice that for the successful burns, the logs always show drive buffer to be equal to 2048kb (which is normal). As for the unsuccessful/aborted burns, the logs show drive buffer to be empty. Maybe you can run e.g Nero InfoTool to check whether your drive buffer is O.K.
Thanks so much for your input, I tried restoring to a much earlier date and problem fixed. Thanks again.
