I'm trying to burn some ISO images. I have 5 different ISO's I'm trying to burn, I've tried burning with both Nero and Alcohol, and each time after the burn I get an error when I insert the CD. "Windows cannot read from this disk. The disk might be corrupted, or it could be using a format that is not compatable with Windows." I suppose it's POSSIBLE that I have bad images, but I'm hoping maybe I'm just doing something wrong... any ideas?
If you have Nero 6, install the Nero ImageDrive utiliyt and mount the ISO image file that you are having trouble with. Once mounted, it will look like another CDROM drive in your Explorer. Now see if you can run the program, or read the data contained in it. This will at least help us determine if the ISO image is good or not. Regards, Craig
I'm having the same prob when trying to burn some data files. Nero reports a successful burn but when I try the disk in my standard cd/dvd drive, I get the same "Windows cannot read from this disk. The disk might be corrupted, or it could be using a format that is not compatable with Windows." error message. When I put the disk back in the burner and look at at disk info, it says that the disk is still blank but file explorer shows that the files, though greyed out, are on the disk. Win Xp's "burn" util didn't work either. I am using Nero 6 and an IO Magic 48/16/48 burner. I've been through all the settings a dozen times or more. I must be missing something?
You can use IsoBuster to extract the iso file and seee the entire directory of the image. I personally recommend burnatonce (<-- it's free) for burning iso and bin and cue file formats. http://www.burnatonce.com/downloads
Hi Swede, Are you sure the Nero Softwares 'Disc Info' feature is reporting the disc as blank or empty after you attempt a write operation on the disc that is reported succesful? If you are correct, then one of two things must have occured. 1) You did not actually write to the disc, but instead had selected the Image Recorder as the destination and created an Image file on your Hard drive, or you wrote in Simulation mode only. 2) Your recorder has a blown diode and the laser is not actually burning to the disc. Can you provide a copy of the Nero log file. Edit out your serial key of course. This way we can see what actually occured, and be more precise in our suggestions of possible causes. Regards, Craig
This is prob a lot more than you need but here is the history log file... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 79MB (81496kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 1:43:36 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 1:43:36 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 1:43:36 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 1:43:36 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 1:43:36 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 1:43:36 AM #6 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 1:43:36 AM #7 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359846 (79:59.71) Last address to be written: 31016 ( 6:55.41) 1:43:36 AM #8 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 1:43:36 AM #9 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 1:43:36 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 31017 (31017) = #31017/6:53.42 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 31015 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 1:43:36 AM #11 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 1:43:36 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 63830016 1:43:36 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 1:43:36 AM #14 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 1:43:36 AM #15 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 1:43:36 AM #16 Phase 28 File dlgbrnst.cpp, Line 1818 Speed measurement started 1:43:36 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 1:43:53 AM #18 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 1:43:53 AM #19 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 1:43:53 AM #20 Phase 29 File dlgbrnst.cpp, Line 1768 Speed measurement completed: 58.6x (8,790 KB/s) 1:43:53 AM #21 Text 0 File Burncd.cpp, Line 4010 Can only write at 24x instead of 48x, because speed of source data is too slow 1:43:53 AM #22 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 1:43:53 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 1:43:53 AM #24 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 1:44:25 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 1:44:27 AM #26 Text 0 File Mmc.cpp, Line 13141 <ATAPI CD-RW 48X16 > start Close Session 1:44:54 AM #27 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 24x (3,600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 100MB (102624kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 2:02:15 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:02:15 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 2:02:15 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 2:02:15 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 2:02:15 AM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 2:02:58 AM #6 Phase 40 File dlgbrnst.cpp, Line 1818 Aborted by user 2:02:58 AM #7 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359851 (80:00.01) Last address to be written: 390866 (86:53.41) 2:02:58 AM #8 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 2:02:58 AM #9 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CD type reading failed ATIP Data: ? Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 83MB (85100kB) Memory in use : 67 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 9:06:19 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:06:19 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 9:06:19 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 9:06:19 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 9:06:19 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 9:06:19 AM #6 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 9:06:20 AM #7 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359846 (79:59.71) Last address to be written: 7962 ( 1:48.12) 9:06:20 AM #8 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:06:20 AM #9 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 9:06:20 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 7963 (7963) = #7963/1:46.13 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 7961 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 9:06:20 AM #11 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 9:06:20 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 16615424 9:06:20 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 9:06:20 AM #14 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 9:06:20 AM #15 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 9:06:20 AM #16 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 9:06:20 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:06:20 AM #18 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 9:06:56 AM #19 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:07:04 AM #20 Text 0 File Mmc.cpp, Line 13141 <ATAPI CD-RW 48X16 > start Close Session 9:07:56 AM #21 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 24x (3,600 KB/s) 9:07:57 AM #22 Phase 78 File dlgbrnst.cpp, Line 1818 Data verification started 9:08:02 AM #23 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:03 AM #24 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:04 AM #25 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:05 AM #26 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:06 AM #27 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:07 AM #28 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:08 AM #29 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:09 AM #30 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:10 AM #31 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:11 AM #32 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:08:12 AM #33 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:09:59 AM #34 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:10:09 AM #35 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file SP7448.exe 9:10:12 AM #36 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file SP7176.exe 9:10:16 AM #37 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file SP7141.exe 9:10:19 AM #38 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file SP22688.exe 9:10:22 AM #39 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 1592 Read error on CD file SP12939.exe 9:10:24 AM #40 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 1298 Status summary Total files=8, identical=3, different=0, inaccessible=5, skipped=0. 9:10:24 AM #41 Phase 81 File dlgbrnst.cpp, Line 1818 Data verification failed Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 57MB (59112kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 9:17:17 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:17:17 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 9:17:17 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 9:17:17 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 9:17:17 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 9:17:17 AM #6 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 9:17:18 AM #7 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359846 (79:59.71) Last address to be written: 31016 ( 6:55.41) 9:17:18 AM #8 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:17:18 AM #9 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 9:17:18 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 31017 (31017) = #31017/6:53.42 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 31015 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 9:17:18 AM #11 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 9:17:18 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD not fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 63830016 9:17:18 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 9:17:18 AM #14 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 9:17:18 AM #15 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 9:17:18 AM #16 Phase 28 File dlgbrnst.cpp, Line 1818 Speed measurement started 9:17:18 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:17:34 AM #18 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:17:34 AM #19 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 9:17:34 AM #20 Phase 29 File dlgbrnst.cpp, Line 1768 Speed measurement completed: 64.3x (9,645 KB/s) 9:17:34 AM #21 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 9:17:34 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:17:34 AM #23 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 9:18:15 AM #24 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:18:22 AM #25 Text 0 File Mmc.cpp, Line 13141 <ATAPI CD-RW 48X16 > start Close Session 9:20:27 AM #26 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 24x (3,600 KB/s) 9:20:28 AM #27 Phase 78 File dlgbrnst.cpp, Line 1818 Data verification started 9:20:34 AM #28 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:35 AM #29 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:36 AM #30 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:37 AM #31 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:38 AM #32 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:39 AM #33 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:40 AM #34 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:41 AM #35 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:42 AM #36 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:43 AM #37 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:20:44 AM #38 SCSI -1033 File Cdrdrv.cpp, Line 1151 SCSI Exec, HA 2, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x04 0x01 9:22:35 AM #39 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:26:04 AM #40 Text 0 File UDFCompilationImpl.cpp, Line 1300 Total files=10, identical=9, different=0, inaccessible=0, skipped=1. 9:26:04 AM #41 Phase 80 File dlgbrnst.cpp, Line 1818 Data verification completed successfully Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 75MB (77744kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (UDF/ISO) 9:40:12 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:40:12 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 9:40:12 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 9:40:12 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 9:40:12 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 9:40:12 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 9:40:12 AM #7 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 9:40:12 AM #8 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359846 (79:59.71) Last address to be written: 31366 ( 7:00.16) 9:40:12 AM #9 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:40:12 AM #10 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 9:40:12 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 31367 (31367) = #31367/6:58.17 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 31365 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 9:40:12 AM #12 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 9:40:12 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 64546816 9:40:12 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 9:40:12 AM #15 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 9:40:12 AM #16 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 9:40:12 AM #17 Phase 28 File dlgbrnst.cpp, Line 1818 Speed measurement started 9:40:12 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:40:28 AM #19 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:40:28 AM #20 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 9:40:28 AM #21 Phase 29 File dlgbrnst.cpp, Line 1768 Speed measurement completed: 68x (10,200 KB/s) 9:40:28 AM #22 Text 0 File Burncd.cpp, Line 4010 Can only write at 24x instead of 48x, because speed of source data is too slow 9:40:28 AM #23 Phase 32 File dlgbrnst.cpp, Line 1818 Simulation started at 24x (3,600 KB/s) 9:40:28 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:40:28 AM #25 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 9:40:55 AM #26 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:40:57 AM #27 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 9:41:09 AM #28 Phase 33 File dlgbrnst.cpp, Line 1818 Simulation completed successfully at 24x (3,600 KB/s) 9:41:09 AM #29 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 9:41:09 AM #30 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:41:09 AM #31 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 9:41:25 AM #32 SCSI -1064 File Cdrdrv.cpp, Line 1361 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03860000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x80 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x21 0x02 9:41:25 AM #33 CDR -1064 File Writer.cpp, Line 335 Invalid block address 9:41:25 AM #34 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:41:25 AM #35 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 9:41:26 AM #36 CDR -201 File WriterStatus.cpp, Line 191 Invalid write state 9:41:26 AM #37 TRANSFER -18 File WriterStatus.cpp, Line 191 Could not perform EndTrack 9:41:26 AM #38 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 9:41:26 AM #39 Phase 38 File dlgbrnst.cpp, Line 1818 Burn process failed at 24x (3,600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 86MB (88484kB) Memory in use : 66 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 9:43:26 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 9:43:26 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 9:43:26 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 9:43:26 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 9:43:26 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 9:43:26 AM #6 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 9:43:27 AM #7 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359846 (79:59.71) Last address to be written: 31016 ( 6:55.41) 9:43:27 AM #8 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 9:43:27 AM #9 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 9:43:27 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 31017 (31017) = #31017/6:53.42 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 31015 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 9:43:27 AM #11 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 9:43:27 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 63830016 9:43:27 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 9:43:27 AM #14 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 9:43:27 AM #15 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 9:43:27 AM #16 Phase 28 File dlgbrnst.cpp, Line 1818 Speed measurement started 9:43:27 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:43:43 AM #18 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:43:43 AM #19 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 9:43:43 AM #20 Phase 29 File dlgbrnst.cpp, Line 1768 Speed measurement completed: 65.4x (9,810 KB/s) 9:43:43 AM #21 Text 0 File Burncd.cpp, Line 4010 Can only write at 24x instead of 48x, because speed of source data is too slow 9:43:43 AM #22 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 9:43:43 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 9:43:43 AM #24 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 9:44:09 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 9:44:19 AM #26 Text 0 File Mmc.cpp, Line 13141 <ATAPI CD-RW 48X16 > start Close Session 9:44:50 AM #27 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 24x (3,600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 58MB (59488kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (ISO) 10:21:58 AM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:21:58 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 10:21:58 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 10:21:58 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 10:21:58 AM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 10:22:01 AM #6 Phase 40 File dlgbrnst.cpp, Line 1818 Aborted by user 10:22:01 AM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 10:22:01 AM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CD type reading failed ATIP Data: ? Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 79MB (81312kB) Memory in use : 68 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.8.2004 CD-ROM (UDF/ISO) 2:56:32 PM #1 Text 0 File Isodoc.cpp, Line 5451 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 2 / XA ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:56:32 PM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 2:56:32 PM #3 Text 0 File Reader.cpp, Line 118 Reader running 2:56:32 PM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 2:56:32 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 2:56:32 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3814 First writeable address = 0 (0x00000000) 2:56:32 PM #7 Text 0 File Burncd.cpp, Line 3081 Turn on Track-at-once, using CD-R/RW media 2:56:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359848 (79:59.73) Last address to be written: 31366 ( 7:00.16) 2:56:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 2:56:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDRW code: 00 97 25 30; OSJ entry from: INFODISC Technology Co., Ltd. ATIP Data: Special Info [hex] 1: D1 00 C6, 2: 61 19 1E (LI 97:25.30), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 02 4C D0, 2: 4A D8 5A, 3: 00 80 80 (invalid) 2:56:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_FORM1_NOSUB (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 31367 (31367) = #31367/6:58.17 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE2_FORM1_NOSUB, 2048, config 0, wanted index0 0 blocks, length 31365 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 2:56:36 PM #12 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-RW media 2:56:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x20 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE2_FORM1_NOSUB, 2048/0x0, ISRC "", FilePos 0 307200 64546816 2:56:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 938 Removed 2 run-out blocks from end of track 1. 2:56:36 PM #15 Phase 24 File dlgbrnst.cpp, Line 1818 Caching of files started 2:56:36 PM #16 Phase 25 File dlgbrnst.cpp, Line 1818 Caching of files completed 2:56:36 PM #17 Phase 28 File dlgbrnst.cpp, Line 1818 Speed measurement started 2:56:36 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 2:56:53 PM #19 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 2:56:53 PM #20 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 2:56:53 PM #21 Phase 29 File dlgbrnst.cpp, Line 1768 Speed measurement completed: 58.6x (8,790 KB/s) 2:56:53 PM #22 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 4x (600 KB/s) 2:56:53 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 2:56:53 PM #24 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 2:58:45 PM #25 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 2:58:50 PM #26 Text 0 File Mmc.cpp, Line 13141 <ATAPI CD-RW 48X16 > start Close Session 3:00:14 PM #27 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 4x (600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== L. Scott Gibson Protective Financial Services 1A23-[bold]serial number removed[/bold] Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'E:\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.56, size=163910 bytes, created 4/2/2003 8:13:44 AM Nero version: 6.0.0.0 (Nero Express) Recorder: <ATAPI CD-RW 48X16> Version: A.UZ - HA 2 TA 0 - 6.0.0.0 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.0.0.0 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD200BB-75CAA0 atapi Port 0 ID 0 DMA: On DiskPeripheral : WDC WD800BB-75CAA0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 254MB (260912kB) Free physical memory: 59MB (60724kB) Memory in use : 76 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.9.2004 Audio CD 10:25:48 AM #1 CDADOC -1 File Cdadoc.cpp, Line 1506 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 05:56.31, Pause frames: 150, Filters: 1, Name: 'Guns N' Roses - Sweet Child Of Mine.mp3'. Track 02: Length: 04:01.43, Pause frames: 150, Filters: 1, Name: 'REO Speedwagon - Take It On The Run.mp3'. Track 03: Length: 03:03.57, Pause frames: 150, Filters: 1, Name: 'KC & The Sunshine Band - That's The Way I Like It.mp3'. Track 04: Length: 03:12.29, Pause frames: 150, Filters: 1, Name: 'Nylons - The Lion Sleeps Tonight.mp3'. Track 05: Length: 03:42.03, Pause frames: 150, Filters: 1, Name: 'Michael McDonald - What A Fool Believes.mp3'. Track 06: Length: 05:54.34, Pause frames: 150, Filters: 1, Name: 'Prince - When Doves Cry.mp3'. Track 07: Length: 04:26.27, Pause frames: 150, Filters: 1, Name: 'Tom Jones - You Can Leave Your Hat On.mp3'. Track 08: Length: 02:50.18, Pause frames: 150, Filters: 1, Name: 'Dusty Springfield - You Don't Have To Say You Love Me.mp3'. Track 09: Length: 04:00.48, Pause frames: 150, Filters: 1, Name: 'Sweet - Ballroom Blitz.Mp3'. Track 10: Length: 04:45.42, Pause frames: 150, Filters: 1, Name: 'Peter Frampton - Baby, I Love Your Way.mp3'. Track 11: Length: 03:41.07, Pause frames: 150, Filters: 1, Name: 'Tom Jones - Baby It's Cold Outside.mp3'. Track 12: Length: 03:37.41, Pause frames: 150, Filters: 1, Name: 'Player - Baby Come Back.mp3'. Track 13: Length: 04:09.56, Pause frames: 150, Filters: 1, Name: 'Bonnie Tyler - Angel Of The Morning.mp3'. Track 14: Length: 06:59.08, Pause frames: 150, Filters: 1, Name: 'Bonnie Tyler - Total Eclipse of the Heart.mp3'. Track 15: Length: 03:29.06, Pause frames: 150, Filters: 1, Name: 'Van McCoy - The Hustle.mp3'. Track 16: Length: 03:11.73, Pause frames: 150, Filters: 1, Name: 'KC & The Sunshine Band - Play That Funky Music White Boy.mp3'. Track 17: Length: 03:49.73, Pause frames: 150, Filters: 1, Name: 'Nena - 99 Luftballons .mp3'. Total size: 71:25.71 10:25:48 AM #2 Phase 87 File dlgbrnst.cpp, Line 1818 Seamless Link activated 10:25:48 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 10:25:48 AM #4 Text 0 File Writer.cpp, Line 127 Writer ATAPI CD-RW 48X16 running 10:25:48 AM #5 Text 0 File Burncd.cpp, Line 3081 Turn on Disc-at-once, using CD-R/RW media 10:25:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 224 Last possible write address on media: 359848 (79:59.73) Last address to be written: 321295 (71:25.70) 10:25:48 AM #7 Text 0 File DlgWaitCD.cpp, Line 229 Write in overburning mode: FALSE 10:25:48 AM #8 Text 0 File DlgWaitCD.cpp, Line 1688 Recorder: ATAPI CD-RW 48X16; CDR code: 00 97 24 11; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 40 98, 2: 61 18 0B (LI 97:24.11), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:25:48 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 757 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (Guns N' Roses - Sweet Child Of Mine.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 26731 (26731) = #26731/5:56.31 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26731 blocks [ATAPI CD-RW 48X16 ] 1: TRM_AUDIO_NOPRE (REO Speedwagon - Take It On The Run.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 18118 (18118) = #18118/4:1.43 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18118 blocks [ATAPI CD-RW 48X16 ] 2: TRM_AUDIO_NOPRE (KC & The Sunshine Band - That's The Way I Like It.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 13782 (13782) = #13782/3:3.57 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 13782 blocks [ATAPI CD-RW 48X16 ] 3: TRM_AUDIO_NOPRE (Nylons - The Lion Sleeps Tonight.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 14429 (14429) = #14429/3:12.29 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14429 blocks [ATAPI CD-RW 48X16 ] 4: TRM_AUDIO_NOPRE (Michael McDonald - What A Fool Believes.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 16653 (16653) = #16653/3:42.3 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16653 blocks [ATAPI CD-RW 48X16 ] 5: TRM_AUDIO_NOPRE (Prince - When Doves Cry.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 26584 (26584) = #26584/5:54.34 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 26584 blocks [ATAPI CD-RW 48X16 ] 6: TRM_AUDIO_NOPRE (Tom Jones - You Can Leave Your Hat On.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 19977 (19977) = #19977/4:26.27 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 19977 blocks [ATAPI CD-RW 48X16 ] 7: TRM_AUDIO_NOPRE (Dusty Springfield - You Don't Have To Say You Love Me.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 12768 (12768) = #12768/2:50.18 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 12768 blocks [ATAPI CD-RW 48X16 ] 8: TRM_AUDIO_NOPRE (Sweet - Ballroom Blitz.Mp3) 2 indices, index0 (150) not provided original CD pos #0 + 18048 (18048) = #18048/4:0.48 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18048 blocks [ATAPI CD-RW 48X16 ] 9: TRM_AUDIO_NOPRE (Peter Frampton - Baby, I Love Your Way.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 21417 (21417) = #21417/4:45.42 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 21417 blocks [ATAPI CD-RW 48X16 ] 10: TRM_AUDIO_NOPRE (Tom Jones - Baby It's Cold Outside.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 16582 (16582) = #16582/3:41.7 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16582 blocks [ATAPI CD-RW 48X16 ] 11: TRM_AUDIO_NOPRE (Player - Baby Come Back.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 16316 (16316) = #16316/3:37.41 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 16316 blocks [ATAPI CD-RW 48X16 ] 12: TRM_AUDIO_NOPRE (Bonnie Tyler - Angel Of The Morning.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 18731 (18731) = #18731/4:9.56 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 18731 blocks [ATAPI CD-RW 48X16 ] 13: TRM_AUDIO_NOPRE (Bonnie Tyler - Total Eclipse of the Heart.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 31433 (31433) = #31433/6:59.8 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 31433 blocks [ATAPI CD-RW 48X16 ] 14: TRM_AUDIO_NOPRE (Van McCoy - The Hustle.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 15681 (15681) = #15681/3:29.6 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 15681 blocks [ATAPI CD-RW 48X16 ] 15: TRM_AUDIO_NOPRE (KC & The Sunshine Band - Play That Funky Music White Boy.mp3) 2 indices, index0 (150) not provided original CD pos #0 + 14398 (14398) = #14398/3:11.73 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 14398 blocks [ATAPI CD-RW 48X16 ] 16: TRM_AUDIO_NOPRE (Nena - 99 Luftballons .mp3) 2 indices, index0 (150) not provided original CD pos #0 + 17248 (17248) = #17248/3:49.73 relocatable, CD pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_NOPRE, 2352, config 0, wanted index0 0 blocks, length 17248 blocks [ATAPI CD-RW 48X16 ] -------------------------------------------------------------- 10:25:48 AM #10 Text 0 File Burncd.cpp, Line 3318 Recorder and media-info ======================= Burning to ATAPI CD-RW 48X16 on a CD-R media 10:25:48 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 910 Prepare recorder ATAPI CD-RW 48X16 for write in cue-sheet-DAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 17: TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 0 352800 63224112 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 63224112 63576912 106190448 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 106190448 106543248 138958512 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 138958512 139311312 173248320 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 173248320 173601120 212768976 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 212768976 213121776 275647344 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 275647344 276000144 322986048 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 322986048 323338848 353369184 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 353369184 353721984 396170880 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 396170880 396523680 446896464 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 446896464 447249264 486250128 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 486250128 486602928 524978160 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 524978160 525330960 569386272 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 569386272 569739072 643669488 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 643669488 644022288 680904000 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 680904000 681256800 715120896 TRM_AUDIO_NOPRE, 2352/0x0, ISRC "", FilePos 715120896 715473696 756040992 10:26:52 AM #12 Phase 36 File dlgbrnst.cpp, Line 1818 Burn process started at 24x (3,600 KB/s) 10:26:52 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 0 (relocatable, no CD pos, no patch infos, orig at #0): write at #0 10:26:52 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 1 (relocatable, no CD pos, no patch infos, orig at #0): write at #26881 10:26:52 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 2 (relocatable, no CD pos, no patch infos, orig at #0): write at #45149 10:26:52 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 3 (relocatable, no CD pos, no patch infos, orig at #0): write at #59081 10:26:52 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 4 (relocatable, no CD pos, no patch infos, orig at #0): write at #73660 10:26:52 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 5 (relocatable, no CD pos, no patch infos, orig at #0): write at #90463 10:26:52 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 6 (relocatable, no CD pos, no patch infos, orig at #0): write at #117197 10:26:52 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 7 (relocatable, no CD pos, no patch infos, orig at #0): write at #137324 10:26:52 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 8 (relocatable, no CD pos, no patch infos, orig at #0): write at #150242 10:26:52 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 9 (relocatable, no CD pos, no patch infos, orig at #0): write at #168440 10:26:52 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 10 (relocatable, no CD pos, no patch infos, orig at #0): write at #190007 10:26:52 AM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 11 (relocatable, no CD pos, no patch infos, orig at #0): write at #206739 10:26:52 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 12 (relocatable, no CD pos, no patch infos, orig at #0): write at #223205 10:26:52 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 13 (relocatable, no CD pos, no patch infos, orig at #0): write at #242086 10:26:52 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 14 (relocatable, no CD pos, no patch infos, orig at #0): write at #273669 10:26:52 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 15 (relocatable, no CD pos, no patch infos, orig at #0): write at #289500 10:26:52 AM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2104 Verifying CD position of item 16 (relocatable, no CD pos, no patch infos, orig at #0): write at #304048 10:26:52 AM #30 Text 0 File Mmc.cpp, Line 13676 StartDAO : CD-Text - On 10:26:52 AM #31 Text 0 File Mmc.cpp, Line 18119 Set BUFE: Seamless Link -> ON , Auto Pilot : ON 10:26:52 AM #32 Text 0 File Mmc.cpp, Line 13976 CueData, Len=288 21 00 00 41 00 00 00 00 21 01 00 00 00 00 00 00 21 01 01 00 00 00 02 00 21 02 00 00 00 05 3a 1f 21 02 01 00 00 06 00 1f 21 03 00 00 00 0a 01 4a 21 03 01 00 00 0a 03 4a 21 04 00 00 00 0d 07 38 21 04 01 00 00 0d 09 38 21 05 00 00 00 10 16 0a 21 05 01 00 00 10 18 0a 21 06 00 00 00 14 06 0d 21 06 01 00 00 14 08 0d 21 07 00 00 00 1a 02 2f 21 07 01 00 00 1a 04 2f 21 08 00 00 00 1e 1e 4a 21 08 01 00 00 1e 20 4a 21 09 00 00 00 21 17 11 21 09 01 00 00 21 19 11 21 0a 00 00 00 25 19 41 21 0a 01 00 00 25 1b 41 21 0b 00 00 00 2a 0d 20 21 0b 01 00 00 2a 0f 20 21 0c 00 00 00 2d 38 27 21 0c 01 00 00 2d 3a 27 21 0d 00 00 00 31 24 05 21 0d 01 00 00 31 26 05 21 0e 00 00 00 35 2f 3d 21 0e 01 00 00 35 31 3d 21 0f 00 00 00 3c 30 45 21 0f 01 00 00 3c 32 45 21 10 00 00 00 40 14 00 21 10 01 00 00 40 16 00 21 11 00 00 00 43 21 49 21 11 01 00 00 43 23 49 01 aa 01 01 00 47 19 47 10:31:00 AM #33 Text 0 File WriterStatus.cpp, Line 112 <ATAPI CD-RW 48X16 > start writing Lead-Out at LBA 321296 (4E710h), lenght 0 blocks 10:31:36 AM #34 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 10:31:36 AM #35 Text 0 File dlgbrnst.cpp, Line 1678 Set remaining time: 0:00,000 (0ms) -> OK 10:31:36 AM #36 Phase 37 File dlgbrnst.cpp, Line 1818 Burn process completed successfully at 24x (3,600 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
strange... you might want to delete the first 3 lines of every Nero log you have there -- especially the serial number... Try using some emulation software to mount the .iso files and see if they are corrupt (as earlier suggested). For example, Alcohol 120% and Daemon Tools are very good programs for this purpose.
Hi Swede, Just the last log file would have been fine. Well, your not doing Simulation, and your not writing to the Image Recorder. And the write did come off as succesful. You do have a very old version of Nero 6.0.0.0, and you should upgrade to our latest Nero 6.3.1.25 just to be sure that is not your issue, but I doubt it is. But anything is possible and we need to rule that out first. You should also upgrade the firmware to your recorde, as this will have a large affect when it comes to supporting burns to various media. IF you do these to things and still have problems, I would suspect your recorder needs to be serviced. As a final test, I would recommend using a third party software such as Clone-CD, or NTIs software to see if you have the same issue with other software. Best to use free software, or a Trial version of software so you do not need to spend any money. And try with more than one brand of CDR or CD-RW media. And if you still have problems, then you can be 100% sure you have issues with the recorder.
