Hello guys everytime I try to burn a CD I end up with failed error message?? Please tell what is reay going wrong and this is the report: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 06:35:34 م Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e (Nero Express) Recorder: <HL-DT-ST RW/DVD GCC-H11N>Version: 1.00 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 2 Drive buffer : 1536kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <HL-DT-ST RW/DVD GCC-H11N >Version: 1.00 - HA 2 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 2 === Scsi-Device-Map === DiskPeripheral : WDC WD1600AAJS-00PSA0 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-H11N atapi Port 2 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-H11N D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 502MB (514476kB) Free physical memory: 233MB (239460kB) Memory in use : 53 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.2.2008 ===== Disc-Copy over image - 1st step : Copy to image ... 05:43:13 م #1 Text 0 File Reader.cpp, Line 127 Reader running 05:43:13 م #2 Phase 48 File dlgbrnst.cpp, Line 1832 Analyzing disc 05:43:13 م #3 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 05:43:13 م #4 CDCOPY -1 File CDCopy.cpp, Line 1912 The CD is copyrighted 05:43:13 م #5 Text 0 File CDCopy.cpp, Line 2128 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 296680 296679 ( 65:57.54) 05:43:13 م #6 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 296680 = 296680, data (TRM_DATA_MODE1, block size 2048) 05:43:13 م #7 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 05:43:14 م #8 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 445499 ( 99:01.74) Last address to be written: 296679 ( 65:57.54) 05:43:14 م #9 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 05:43:14 م #10 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 05:43:14 م #11 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 296680 (296680) = #296680/65:55.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296680 blocks [Image Recorder] -------------------------------------------------------------- 05:43:14 م #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607907840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 296680 | lead-out | 1 | 0x41 | 0x00 05:43:14 م #13 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 05:43:14 م #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 05:45:34 م #15 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 296680 (486E8h), lenght 0 blocks 05:45:34 م #16 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 05:45:34 م #17 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 05:46:11 م #1 Text 0 File Burncd.cpp, Line 2948 HL-DT-ST RW/DVD GCC-H11N Buffer underrun protection activated 05:46:12 م #2 Text 0 File Reader.cpp, Line 127 Reader running 05:46:12 م #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST RW/DVD GCC-H11N running 05:46:12 م #4 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x00 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 607907840 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=65:55.55 ( 296680) RecDep=0x00 MTYP: Mediumtype = CD (old format) (0x1) Image file name: <C:\Documents and Settings\computer herra\My Documents\TempImage.nrg> 05:46:12 م #5 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using CD-R/RW media 05:46:13 م #6 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 296679 ( 65:57.54) 05:46:13 م #7 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 05:46:13 م #8 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST RW/DVD GCC-H11N; CDR code: 00 97 22 67; OSJ entry from: Daxon Technology, Inc. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 16 43 (LI 97:22.67), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 05:46:13 م #9 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 05:46:13 م #10 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) provided original disc pos #0 + 296680 (296680) = #296680/65:55.55 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296680 blocks [HL-DT-ST RW/DVD GCC-H11N] -------------------------------------------------------------- 05:46:13 م #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST RW/DVD GCC-H11N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607907840, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 296680 | lead-out | 1 | 0x41 | 0x00 05:46:13 م #12 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 52x (7,800 KB/s) 05:46:13 م #13 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 05:46:13 م #14 Text 0 File Mmc.cpp, Line 17024 StartDAO : CD-Text - Off 05:46:13 م #15 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Buffer underrun protection -> ON 05:46:13 م #16 Text 0 File Mmc.cpp, Line 17311 CueData, Len=32 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 aa 01 14 00 41 39 37 05:46:25 م #17 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x06EE0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 05:46:25 م #18 CDR -1135 File Writer.cpp, Line 311 Write error 05:46:25 م #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 05:46:25 م #20 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 05:46:25 م #21 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 52x (7,800 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 19/04/2006 01:34:55 ص (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 م (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ---------- Thank you
hi this a burn error (it doesn't seem to like your disc) or... far to fast even for cd's try some where around the 26x mark i'd be inclined to try the slower speed with the disc's you have...if that doesn't work change your media for something a little better ie. Verbatim (still burn a little slower even with these)
