Problems loading evox from disc

I am having trouble loading evox from disc I am using a retail hard drive, I flashed my mod chip which is a 2.3b lite with the xecuter2 4978.03 bios. The xecuter logo shows up under the xbox logo but never boots the dashboard.

 

make a folder on your pc called EVOXCD and send evoxdash.xbe and the evox.ini to it(you can also send the trainer and skin folder if you want) you may also want to make a dummyfile to send the data to the edge of the disc

download dummyfile creator from http://www.teamxecuter.com

ok make a 400mb dummyfile and send it to the EVOXCD folder

rename evoxdash.xbe to default.xbe then rename dummy.bin to abc.bin

then use craxion to turn it into an xISO
http://www.craxtion.com

then use NERO to burn that ISO onto a good quality cd(not cd-r) cd-r only work on one type of dvd-rom(the samsung).Use cd-rw I recomend TDK cd-rw

these are your burn settings

disc at once
finalise cd
slowest burn speed

 

o and if you have windows xp, make sure you download the craxtion autoinstall, the normal one is hard to get to work.

 

Thank you for your response!! I am still having problems doing that with the settings you have given me! It still will not load the evox dash. I am using fuji dvd-rw discs they worked when flashing the bios to the chip, but i wouldnt see how that could be the problem now. Do i need to edit the evox.ini file in anyway if i am using a retail hard drive. or would it be easier to get this to work if i went and got a new bigger hard drive

 

i also have the thompson drive(horrible!!!!!!!!!)

 

I also downloaded the slayers install but i could not get that to load either

 

try datawrite yellow media, it works on all xbox

 

Is there anyway to install evox on a new hard drive using the pc first without using a boot cd

 

Can you maybe paste a copy of what my ini file is supposed to look like for a retail hard drive this is very frustrating

 

I also can't load the evox dashboard. I installed an Xecuter 2.3b Lite chip. Flashed the bios. It loads to the normal XBOX dashboard. Is this normal? Is there an alternative? I am a beginner so please help.

 

try re aligning your chip
disable the chip, reboot thexbox, while its booting align the chip so you see 3 lights (2 blue, one orange/yellow) when you see 3 lights/leds, switch off your xbox, enable the chip, and reboot

 

When you update your bios to your chip should a new dashboard then be available on startup?

 

no you still have to install the dashboard, but flashing the bios is the first big step.
You can actually play your previously made backups without loading a new dash (such as evox)
but to enble you to make your own backups, install and use other apps etc, you need to load a dashboard in yourself, the easiest way is by an autoinstaller on a disc, this does it all for you.
PM me if you need help regarding where to get one.
_X_X_X_X_X_[small]Is it true Michael Jackson speaks Marklar?[/small]

 

try firefuckers autoinstaller it worked for me

 

it also burns it to the disc for you. I used tdk high speed cdrw's
put it in the drive when your xbox is starting and it should come up with a menu for you to choose from

 

Mr. Icarrbutt

Thank you very much for your words of wisdom. I spent 2 days trying to replace my dashboard and after reading your post, it took me twenty minutes. Appreciate it!

 

I Still need help with this damn dashboard. Anybody out there that can send me the auto-install file or tell me where I can find it would be GREATLY appreciated. You can PM with this info. I've tried everything. Need serious help.