Reality Check -- System Temps

Discussion in 'Building a new PC' started by k7vc, Oct 24, 2009.

  1. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    I have built an i7-860 system on a GB-P55-UD5 mobo with GTX-260 graphics board, 2 sticks of Corsair Dominator DDR3 memory and a Freezer 7 CPU cooler in a CM-690 case with a full compliment of case fans.

    I have heard that Nvidia boards run hot and this one certainly is. I don't know how to measure the temps, but the board and exhaust ports are too hot to touch for long.

    When running the 860 at 3.36MHz with all 8 cores at 100% plus the GTX-260 GPU at 100%, the GB tuning utility reports a system temp of 39C and CPU temp of 56C.

    (CPU 1.232 v, memory 1.616 v)

    I have little experience to compare this to. Is the system self-destructing or is it running within reasonable limits?

    Dick
     
  2. Knuck1ez

    Knuck1ez Regular member

    Joined:
    Nov 22, 2006
    Messages:
    408
    Likes Received:
    0
    Trophy Points:
    26
    That perfectly normal.. My q9550 @4ghz runs 35C idle and around 50C full load with my noctua heatsink and the motherboard never passes 40. This is from 24/7 use.
    just know that i7's dont have 8 cores its really 4
     
  3. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    Those temps are fine. You haven't told us the temperature of your graphics card though, so you're "nvidia boards run hot" comment is irrelevant, we have no idea how hot your card is running. The CPU and chipset temps are fine, at least. Also, Knucklez is right, the i7 is 4 cores with hyperthreading.
     
  4. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    Oh, come on, Sam. Be nice. :)

    I read one of your comments in another thread where you mentioned that the Nvidia cards run hot and people shouldn't worry about them. So when I had to quickly remove my fingers from the exhaust vent I thought, "Sam was right." Sorry for the irrelevancy. I'll go download the EVGA utilities and check the reported GPU temp.

    Thanks to both you and Knucklez for your very relevant comments regarding the chipset and CPU temps. :p

    Now to go read up on this hyperthreading stuff....

    Thanks again.

    Dick
     
  5. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    To be honest, there is no easy way to measure the temperature of a GPU - the temperature of the exhaust slot is nowhere near as high, and the readings via software aren't always correct. Either way, the temperature is no issue if it doesn't cause you any issues. You're looking for anything lower than 90ºC for the GPU temperature to be fine. The voltage regulators are fine up to about 120ºC.
     
  6. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    Well, the EVGA software reports a GPU temp of 45C at idle and 60C under load. What I find interesting is their "auto" fan control never moves the fan off 40%. I wonder how hot it has to get for the fan to become involved??

    Thanks for the additional info, Sam. Much appreciated.

    Dick
     
  7. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    Sounds fine, though I find 60ºC rather unbelievable, unless of course 40% fan speed is higher than usual (it sounds it).
     
  8. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    Beats me, Boss. Believability is above my pay grade. :)

    BTW, as a rule of thumb, what should be the upper limit of CPU temps with the 860? At what point should I back off the accelerator or add more fans or drag in the garden hose?

    Dick
     
  9. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    Generally you want to keep below 60ºC if you can. It only becomes a problem when you go above 70ºC.
     
  10. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    Thanks. I'll keep that in mind.

    Dick
     
  11. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    I snuck up on the GPU after it had run at 100% for about eighteen hours and caught it doing 72C. After about five minutes of idling it cooled down to 35C. And the stupid fan never budged off an indicated 40%.

    Dick
     
  12. Xplorer4

    Xplorer4 Active member

    Joined:
    Apr 13, 2006
    Messages:
    1,080
    Likes Received:
    0
    Trophy Points:
    66
    You can try RivaTunner. It will allow you to control the fan speed on your GPU manually. I run my fan on my 9800GTX+ at 100% and compared to the stock speed, it dropped off almost 5 degrees on the temp.
     
  13. KillerBug

    KillerBug Active member

    Joined:
    May 21, 2006
    Messages:
    3,802
    Likes Received:
    0
    Trophy Points:
    66
    You could also hard wire the fan so it runs 100% all the time...I used to have to do that with the old ATI 1650 cards that came with chipset-sized coolers with fans that didn't even turn on untill 50C, and would overheat before going to 100%...once hard-wired, they never even hit 50c.

     
  14. sammorris

    sammorris Senior member

    Joined:
    Mar 4, 2004
    Messages:
    33,335
    Likes Received:
    7
    Trophy Points:
    118
    I did the same, but wired the fan to 5V instead. For the Asus HD3870 that was actually perfectly sufficient, but I doubt it would work for every card...
    It's a lot trickier with more modern cards as they have 4-pin PWM fans which voltage-based controllers will have issue with.
     
  15. k7vc

    k7vc Regular member

    Joined:
    Sep 21, 2009
    Messages:
    293
    Likes Received:
    0
    Trophy Points:
    26
    Since this system runs 100%/24/7 I'm going to manually (through the EVGA control software) crank up the fan to 70-80% and see if it makes a significant difference in the GPU temps. We shall see. Thanks for the ideas.

    BTW, the CPU temps are staying below 60C and the board temp below 40C, so the cooling system seems to be doing its job.

    Dick
     
    Last edited: Oct 26, 2009

Share This Page