Reboot hardware problem?

Discussion in 'PC hardware help' started by adekunle, Feb 12, 2010.

  1. adekunle

    adekunle Member

    Joined:
    Jul 4, 2006
    Messages:
    48
    Likes Received:
    0
    Trophy Points:
    16
    I've had this problem for a while now, about 8 years to be exact.

    My 2001 hp desktop has had the same reboot issue for a long while, and I finally am getting fed up with it.

    Everytime I reboot, the screen goes blank, but not the wierd blackness, no, the screen is not recognizing the computer (The screen button indicates so).

    The wierd thing is that a manual shutdown and power up works fine, no issues, which is why I have used it so long without any issues.

    But now it's irritating, becuase after installing windows 7 fresh on it, the installation requires a few reboots, and, yeah, now the screen is unrecognized again.

    I'm afraid to manual shtdown and start up because I don't want to mess up the installation.

    Any ideas of what the problem might be?
     
  2. jony218

    jony218 Guest

    I had a similar problem with an old 19 inch monitor. During reboot the monitor would stop working. I would have to plug and unplug the monitor for it to work again.

    Have you tried a different monitor?
     
  3. KillerBug

    KillerBug Active member

    Joined:
    May 21, 2006
    Messages:
    3,802
    Likes Received:
    0
    Trophy Points:
    66
    Need some clarification...
    If the screen is unrecognised and the system is running (like after a reboot), does the screen work if you turn off the screen and then turn it back on? If not, I think the issue is with the computer, most likely the video card. If it does work after this test, it is most likely a bad screen.
     

Share This Page