replay lite lastest software. I put on software to a box and now i can't turn it on. is there different software for different boxes. or will all software work for all boxes. help
Hi i can only get basic channels bbc itv ect noting else has anybody got the new codes for n*l South wales area i have tried loads of different codes but nothing seems to work any ideas anybody.
Hi karl1234, Go to http://forums.afterdawn.com/thread_view.cfm/58/502990 And put you question there, just in case what I suggest to you does not work. If you are just getting a red light on the box, it's because you unplugged it too early and the latest software didn't complete the transfer It's called a dead or frozen box. The reason for this can be unplugging the null modem and unplugging BEFORE the box can fully upgrade. When the files are transferring the red/green light will flash slowly. Even after all the files are transferred by your PC WAIT until the red/green lights flash much more quickly than it did when you could visibly see the files transferring on your PC. Only then unplug everything and exit the stb link. ALL THE FILES REQUIRED AT http://eko.4shared.com/ A guide to flashing can be found in DOCUMENTATION. Make sure the null modem lead has part number L71BT on the front of the cover. Do not accept anything that does not have this part number. A Null Modem Cable is required which can be purchased for €18 from Maplins Dublin city centre or if you can wait to have it delivered you can purchase online UK for a fraction of the cost plus postage. One example of where they can be purchased online is http://www.amazon.co.uk/StarTech-com-Nul...9/dp/B00006B8BJ STB LINK FILE 5.20 FOUND UNDER SOFTWARE Flash the box with 742a file. FOUND UNDER FIRMWARE Flash the box. Remember UNTICK maintain user data. Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring. Unplug everything and only connect the power lead. Wait for the led to flash red/green and then stay on green. Then flash with 744 FOUND UNDER FIRMWARE Flash the box. Remember UNTICK maintain user data. Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring. Unplug everything and only connect the power lead. Wait for the led to flash red/green and then stay on green. AND FLASH WITH 752 FOUND UNDER FIRMWARE OR CLONE WITH SOMEONE WHO HAS 752 ALREADY IN THEIR BOX. Flash the box. Remember UNTICK maintain user data. Wait until all the blocks are transferred and WAIT a couple of more minutes for the led to flash much more rapidly than it did when you could visibly see when the blocks were transferring. Unplug everything and connect the power lead and TV and SCART leads. Your box should be now ready for a rescan. DOWNLOAD THE REPLAY HANDBOOK IN DOCUMENTATION.
