I've used dvd shrink and nero and have been successful 50 times in burning dvd's.... but now i keep on getting this error about reset occured. It normally happens about half-way through. I even try simulation before i would burn it and it also does it then. here is what it looks like from the nero history. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'Crogram FilesAheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 4:25:04 PM Nero version: 6.0.0.11 Recorder: <MATSHITA DVD-RAM LF-D311>Version: A125 - HA 1 TA 0 - 6.0.0.11 Adapter driver: <atapi> HA 1 Drive buffer : 1024kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON LTR-40125S >Version: ZGS3 - HA 1 TA 1 - 6.0.0.11 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: Off CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 1 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 510MB (523056kB) Free physical memory: 155MB (158880kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.7.2004 DVD-Video 11:29:26 PM #1 Phase 112 File dlgbrnst.cpp, Line 1843 DVD-Video files reallocation started 11:29:26 PM #2 Phase 114 File dlgbrnst.cpp, Line 1843 DVD-Video files reallocation completed (no file modified) 11:29:26 PM #3 Text 0 File Isodoc.cpp, Line 5771 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 11:29:26 PM #4 Phase 111 File dlgbrnst.cpp, Line 1843 DVD-Video files sorted 11:29:26 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 11:29:26 PM #6 Text 0 File Writer.cpp, Line 127 Writer MATSHITA DVD-RAM LF-D311 running 11:29:26 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 11:29:26 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 11:29:26 PM #9 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 11:29:27 PM #10 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2298495 (510:46.45) Last address to be written: 2286111 (508:01.36) 11:29:27 PM #11 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 11:29:27 PM #12 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: MATSHITA DVD-RAM LF-D311, Media type: DVD-R 11:29:27 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 768 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [MATSHITA DVD-RAM LF-D311 ] -------------------------------------------------------------- 11:29:27 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 937 Prepare recorder [MATSHITA DVD-RAM LF-D311 ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4682264576, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286112 | lead-out | 1 | 0x00 | 0x41 11:29:27 PM #15 Phase 24 File dlgbrnst.cpp, Line 1843 Caching of files started 11:29:27 PM #16 Phase 25 File dlgbrnst.cpp, Line 1843 Caching of files completed 11:29:27 PM #17 Phase 32 File dlgbrnst.cpp, Line 1843 Simulation started at 1x (1,380 KB/s) 11:29:27 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2130 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:29:27 PM #19 Text 0 File DVDR.cpp, Line 1485 Recording mode: Sequential Recording Mode 11:29:27 PM #20 Text 0 File Mmc.cpp, Line 18878 Set BUFE: supported -> ON 11:29:27 PM #21 Text 0 File DVDR.cpp, Line 1600 Start write address at LBA 0 DVD high compatibility mode: Yes 11:29:27 PM #22 Text 0 File Cdrdrv.cpp, Line 7906 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 30000 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:01:07 AM #23 SCSI -1114 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07940000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x13 0x7A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x29 0x00 12:01:07 AM #24 CDR -1114 File Writer.cpp, Line 335 Reset occurred 12:01:07 AM #25 Text 0 File ThreadedTransfer.cpp, Line 227 all writers idle, stopping conversion 12:01:07 AM #26 Text 0 File ThreadedTransfer.cpp, Line 221 conversion idle, stopping reader 12:01:18 AM #27 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:01:18 AM #28 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 12:01:18 AM #29 Phase 34 File dlgbrnst.cpp, Line 1843 Simulation failed at 1x (1,380 KB/s) If anyone knows what i can do please reply back to me.. thanks
Hi, Two things I see that may be problems. This.... means that your burner is set to PIO which is an extremely low transfer speed and will most likely be a problem. The burner should be set to DMA for best performance. Here's a link that may prove useful: http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx The other bit that I noticed is that you're running a very old version of Nero and updating would certainly be a good thing
As previsous replies have indicated try enabling DMA on all devices. ____________________________________________________ DiskPeripheral : WDC WD800BB-53CAA1 atapi Port 0 ID 0 DMA: On DiskPeripheral : IOMEGA ZIP 250 atapi Port 0 ID 1 DMA: Off CdRomPeripheral : MATSHITA DVD-RAM LF-D311 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : LITE-ON LTR-40125S atapi Port 1 ID 1 DMA: On ______________________________________________________
