I have easy studio V2.0 with a serial data cable. I have tried on many computers to get this to work. When I get the software up it won't recognize my phone (comm port). The Comm port option is blank so you can't choose a comm port ( like it isn't connected). It has occasionally automatically loaded my phonebook into the software, but that is all it will do. Has anyone got this to work with this phone? I have also tried going through a serial to usb edgeport box ( connect the serial cable to the edgeport then the edgeport connects to the PC via USB), and still get the same thing. On a side note I have made sure the comm port is enabled and works, I use this comm port on my work pc everyday. Does something have to be done to the phone to get this to work ( like unlock it, whatever that means)? Any help would be appreciated.
PLEASE TRY AT OWN RISK!!! I TAKE NO RESPONSIBILITY FOR YOU DAMAGING PHONE, UNLOCK CODES HAVE BEEN KNOWN TO LOCK PHONES UP AND THIS CODE HAS BEEN KNOWN TO DAMAGE PHONES BEFORE. Instructions Press *#06# and write down your IMEI Unlock Codes Code 1: *2767*688 then your IMEI and then press # For example *2767*688352708000828246# (Everything before the / for C225) Code 2: *0141# Code 3: 00000000 (8 zero's) Entering the Codes 1. Switch your phone off. Remove the original SIM card 2. Insert another SIM card from an alternative network. Power up your phone. You should now see the "Wrong Card" message. 3. Type Code 1 into your phone, if this is entered correctly your phone screen should now turn black and reboot itself. (C225 doesn't go black but does reboot) 4. After the phone reboots the SIM card will be recognized and your SIM will work. Be patient while your phone reboots and DO NOT press any keys. At this point the phone is "Temporarily" unlocked. 5. Now at your idle screen type in Code 2 (*0141#) and hit the call button. This should give you a message saying the phone is "Personalized". 6. Power off the phone and insert the original SIM, then power up. 7. At the SIM code prompt, it will ask you to enter a password. At this stage enter Code 3. 8. After entering hit "OK" and your phone should complete initialization. Your phone is now Permanently unlocked
Thx for the help, but got it to work by removing easy studio 2.0, and using PIM and file manager 1.0 Linked up perfectly after doing that.
@ZeroBite On CDMA phone???? You might be kidding! @all DO NOT! use those codes. They can KILL your phone and you will loose your warranty.
