Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'Drogram FilesAheadNeroWnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.20 Recorder: <ASUS CRW-4012A> Version: 1.0 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <IdeChnDr> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CREATIVE CD5221E JJ990720>Version: 1.00 - HA 1 TA 1 - 6.3.1.20 Adapter driver: <IdeChnDr> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A IdeChnDr Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-4012A IdeChnDr Port 1 ID 0 DMA: On CdRomPeripheral : CREATIVE CD5221E JJ990720 IdeChnDr Port 1 ID 1 DMA: Off === CDRom-Device-Map === ASUS CRW-4012A G: CDRom0 CREATIVE CD5221E JJ99072 H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261424kB) Free physical memory: 109MB (112404kB) Memory in use : 57 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 19.8.2004 CD-ROM (ISO) 1:15:00 PM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 1:15:00 PM #2 Phase 97 File dlgbrnst.cpp, Line 1855 FlextraLink activated 1:15:00 PM #3 Text 0 File Reader.cpp, Line 126 Reader running 1:15:00 PM #4 Text 0 File Writer.cpp, Line 124 Writer ASUS CRW-4012A running 1:15:00 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 1:15:00 PM #6 Text 0 File Burncd.cpp, Line 3173 Turn on Track-at-once, using CD-R/RW media 1:15:02 PM #7 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 67124 ( 14:56.74) 1:15:02 PM #8 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 1:15:02 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: ASUS CRW-4012A; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 1:15:02 PM #10 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:15:02 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 5198 (5198) = #5198/1:9.23 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5196 blocks [ASUS CRW-4012A ] -------------------------------------------------------------- 1:15:02 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ASUS CRW-4012A ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 10952704, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 61777 | lead-in | 0 | 0x00 | 0x41 61777 | 2 | 0 | 0x00 | 0x41 61927 | 2 | 1 | 0x00 | 0x41 67125 | lead-out | 1 | 0x00 | 0x41 1:15:02 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 2. Length: 5198 -> 5196. 1:15:02 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 1:15:02 PM #15 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 1:15:02 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 1:15:02 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 16x (2,400 KB/s) 1:15:02 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #61927 1:15:02 PM #19 Text 0 File Mmc.cpp, Line 20531 Set BUFE: FlextraLink -> ON 1:15:03 PM #20 SCSI -1047 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07770000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0xF1 0xE7 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x64 0x00 1:15:03 PM #21 CDR -1047 File Writer.cpp, Line 304 Illegal mode for this track 1:15:03 PM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 1:15:03 PM #23 CDR -201 File WriterStatus.cpp, Line 196 Invalid write state ASUS CRW-4012AH1 T0 1:15:03 PM #24 TRANSFER -18 File WriterStatus.cpp, Line 196 Could not perform EndTrack 1:15:03 PM #25 Text 0 File Mmc.cpp, Line 15356 <ASUS CRW-4012A > start Close Session 1:15:03 PM #26 SCSI -1176 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 1:15:03 PM #27 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error 1:15:03 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 1:15:03 PM #29 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 1:15:03 PM #30 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 1:15:03 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'DriversCDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 8/6/2004 1:39:20 PM File 'DriversCDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 8/6/2004 1:39:20 PM File 'DriversIdeChnDr.sys': Ver=7.00.2014, 07/25/2001, size=79114 bytes, created 8/20/2001 12:00:00 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
I have enabled DMA for my Creative Recorder, but I get the same error. Below is the log file generated after enabling DMA Windows 2000 5.0 IA32 WinAspi: - ahead WinASPI: File 'D:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.20 Recorder: <ASUS CRW-4012A> Version: 1.0 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <CREATIVE CD5221E JJ990720>Version: 1.00 - HA 1 TA 1 - 6.3.1.20 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS CRW-4012A atapi Port 1 ID 0 DMA: On CdRomPeripheral : CREATIVE CD5221E JJ990720 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === ASUS CRW-4012A G: CDRom0 CREATIVE CD5221E JJ99072 H: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261424kB) Free physical memory: 99MB (101516kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 20.8.2004 CD-ROM (ISO) 10:15:40 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Continue multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 10:15:40 AM #2 Phase 97 File dlgbrnst.cpp, Line 1855 FlextraLink activated 10:15:40 AM #3 Text 0 File Reader.cpp, Line 126 Reader running 10:15:40 AM #4 Text 0 File Writer.cpp, Line 124 Writer ASUS CRW-4012A running 10:15:40 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 10:15:40 AM #6 Text 0 File Burncd.cpp, Line 3173 Turn on Track-at-once, using CD-R/RW media 10:15:42 AM #7 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 67120 ( 14:56.70) 10:15:42 AM #8 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 10:15:42 AM #9 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: ASUS CRW-4012A; CDR code: 00 97 24 16; OSJ entry from: SONY Corporation ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:15:42 AM #10 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:15:42 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 5198 (5198) = #5198/1:9.23 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 5196 blocks [ASUS CRW-4012A ] -------------------------------------------------------------- 10:15:42 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [ASUS CRW-4012A ] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 2 to 2: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 10952704, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 61773 | lead-in | 0 | 0x00 | 0x41 61773 | 2 | 0 | 0x00 | 0x41 61923 | 2 | 1 | 0x00 | 0x41 67121 | lead-out | 1 | 0x00 | 0x41 10:15:42 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030 Removed 2 run-out blocks from end of track 2. Length: 5198 -> 5196. 10:15:42 AM #14 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 10:15:42 AM #15 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 10:15:42 AM #16 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 10:15:42 AM #17 Phase 36 File dlgbrnst.cpp, Line 1855 Burn process started at 16x (2,400 KB/s) 10:15:42 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #61923 10:15:42 AM #19 Text 0 File Mmc.cpp, Line 20531 Set BUFE: FlextraLink -> ON 10:15:43 AM #20 SCSI -1047 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x07770000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0xF1 0xE3 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF1 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x64 0x00 10:15:43 AM #21 CDR -1047 File Writer.cpp, Line 304 Illegal mode for this track 10:15:43 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 10:15:43 AM #23 CDR -201 File WriterStatus.cpp, Line 196 Invalid write state ASUS CRW-4012A\H1 T0 10:15:43 AM #24 TRANSFER -18 File WriterStatus.cpp, Line 196 Could not perform EndTrack 10:15:43 AM #25 Text 0 File Mmc.cpp, Line 15356 <ASUS CRW-4012A > start Close Session 10:15:43 AM #26 SCSI -1176 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x72 0x03 10:15:43 AM #27 CDR -1176 File WriterStatus.cpp, Line 245 Session fixation error 10:15:43 AM #28 TRANSFER -19 File WriterStatus.cpp, Line 245 Could not perform Fixation 10:15:43 AM #29 Text 0 File WriterStatus.cpp, Line 254 falling back to disc fixation 10:15:43 AM #30 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 10:15:43 AM #31 Phase 38 File dlgbrnst.cpp, Line 1855 Burn process failed at 16x (2,400 KB/s) Existing drivers: File 'Drivers\CDR4_2K.SYS': Ver=5.3.2.31, size=58000 bytes, created 8/6/2004 1:39:20 PM File 'Drivers\CDRALW2K.SYS': Ver=5.3.2.31, size=23420 bytes, created 8/6/2004 1:39:20 PM File 'Drivers\atapi.sys': Ver=5.00.2195.6699, size=86672 bytes, created 6/19/2003 12:05:04 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This is going to be a difficult one I can see that already. Two things I notice in the log file. 1) You are using an IDE controller I've seen problems with in regards to Recorders and software in general in the past. (See excerpt below) You have an IDECHNDR IDE controller, and I've seen users have trouble when they have old drivers for this IDE controller. A very few could only resolve their issue by using an Add-On IDE controller. (Not that I am suggesting this route at this time.) Can you see if there is an updated driver for this controller? Recorder: <ASUS CRW-4012A> Version: 1.0 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <IdeChnDr> HA 2) I notice in each log file you are 'Continuing a Multisession' write. If you try writing to a fresh or blank CDRW media, do you have this same error message? Do you have another computer you can take the Recorder and Nero software to and test, just to see if the issue is only occuring with this one system? It's not a solution, but it does help us isolate the problem. Regards, Craig
