Hello, New to the forum. I keep getting a Session Fixation Error when I try burning an ISO image to a DVD+R. I had success with about 4,but after that i continually am getting this error. Running XP with SP2 Thanks ahead of time for any help you can provide. Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.1.1.0 Internal Version: 8, 1, 1, 0 Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21 - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <PHILIPS DVD+-RW DVD8631 >Version: CD21 - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 7Y250M0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+-RW DVD8631 D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1046604kB) Free physical memory: 205MB (210784kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2008 Burn DVD Image 1:12:10 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:12:11 PM #2 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 1:12:11 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2294911 (509:58.61, 4482MB) 1:12:11 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:12:11 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R 1:12:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:12:11 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 2294912 (2294912) = #2294912/509:58.62 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294912 blocks [D: PHILIPS DVD+-RW DVD8631] -------------------------------------------------------------- 1:12:11 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [D: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699979776, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2294912 | 2294912 | 0x00 2294912 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:12:11 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 1:12:11 PM #10 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 1:12:11 PM #11 Phase 24 File dlgbrnst.cpp, Line 1764 Caching of files started 1:12:11 PM #12 Text 0 File Burncd.cpp, Line 4435 Cache writing successful. 1:12:11 PM #13 Phase 25 File dlgbrnst.cpp, Line 1764 Caching of files completed 1:12:11 PM #14 Phase 36 File dlgbrnst.cpp, Line 1764 Burn process started at 4x (5,540 KB/s) 1:12:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:12:12 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x04a6f640: Len x804 1:12:12 PM #17 Text 0 File DVDR.cpp, Line 7341 Drive: PHILIPS DVD+-RW DVD8631 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 1:12:12 PM #18 CDR -1207 File DVDR.cpp, Line 6452 Book Type automatically set to: DVD-ROM 1:12:12 PM #19 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 1:12:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 83836800 1:12:44 PM #21 SPTI -1176 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 Buffer x07580040: Len x10000 0x52 45 58 45 30 31 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 5D 1C 9E A3 00 00 00 00 0x45 78 63 69 74 65 20 54 72 75 63 6B 00 00 00 00 1:12:44 PM #22 CDR -1176 File Writer.cpp, Line 306 Session fixation error D: PHILIPS DVD+-RW DVD8631 1:12:44 PM #23 SPTI -1176 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03 1:12:44 PM #24 Phase 127 File dlgbrnst.cpp, Line 1764 Generating DVD high compatibility borders 1:12:44 PM #25 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 0 1:12:44 PM #26 Text 0 File DVDR.cpp, Line 7341 Drive: PHILIPS DVD+-RW DVD8631 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 1:12:44 PM #27 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error D: PHILIPS DVD+-RW DVD8631 1:12:44 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 1:12:44 PM #29 Phase 38 File dlgbrnst.cpp, Line 1764 Burn process failed at 4x (5,540 KB/s) 1:12:44 PM #30 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:12:47 PM #31 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed 1:12:48 PM #32 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Please note I also had an old copy of 7.1 around, I uninstalled 8.1 and installed 7.10.1, and got the same error... here is the log Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <PHILIPS DVD+-RW DVD8631> Version: CD21 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <PHILIPS DVD+-RW DVD8631 >Version: CD21 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 7Y250M0 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === PHILIPS DVD+-RW DVD8631 D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1022MB (1046604kB) Free physical memory: 556MB (569904kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2008 Burn DVD Image 4:57:37 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 4:57:37 PM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 4:58:02 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2294911 (509:58.61, 4482MB) 4:58:02 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 4:58:02 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R 4:58:02 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.) 4:58:02 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1) 2 indices, index0 (150) not provided original disc pos #0 + 2294912 (2294912) = #2294912/509:58.62 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294912 blocks [D: PHILIPS DVD+-RW DVD8631] -------------------------------------------------------------- 4:58:02 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [D: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699979776, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2294912 | 2294912 | 0x00 2294912 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 4:58:02 PM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 4:58:02 PM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 4:58:02 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 4:58:02 PM #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 4:58:02 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 4:58:02 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 2.4x (3,324 KB/s) 4:58:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:58:02 PM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x0610b100: Len x804 4:58:02 PM #17 Text 0 File DVDR.cpp, Line 7402 Drive: PHILIPS DVD+-RW DVD8631 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 4:58:02 PM #18 CDR -1207 File DVDR.cpp, Line 6477 Book Type automatically set to: DVD-ROM 4:58:02 PM #19 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 4:58:02 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 4:58:18 PM #21 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 Buffer x07430040: Len x10000 0x52 4C 42 45 57 52 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 5D 1C 9E A3 00 00 00 00 0x4C 45 47 4F 20 42 61 74 6D 61 6E 00 00 00 00 00 4:58:18 PM #22 CDR -1176 File Writer.cpp, Line 303 Session fixation error D: PHILIPS DVD+-RW DVD8631 4:58:18 PM #23 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03 4:58:18 PM #24 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 4:58:18 PM #25 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 0 4:58:18 PM #26 Text 0 File DVDR.cpp, Line 7402 Drive: PHILIPS DVD+-RW DVD8631 Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 4:58:18 PM #27 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error D: PHILIPS DVD+-RW DVD8631 4:58:18 PM #28 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 4:58:18 PM #29 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 2.4x (3,324 KB/s) 4:58:18 PM #30 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 4:58:22 PM #31 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 4:58:22 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Your drive that's going on 4 years old cannot read the disc. What type of media are you using?
Hmm I didn't catch that ha ha... I am using maxell DVD+R 4.7 So it might just be because my DVD burning drive is so old? I might pick up an external drive
Yes... I burned about 6 in a row that worked.. Then I tried about a dozen since then that have me errors I have used it to burn audio cds for years without problems. This week was the first time I tried burning anything on a DVD.
Umm never heh... I get nervous when it comes to opening up my case.. What would be the best way to clean it? And I'm not sure how to even get to the laser Thanks for all your help by the way
In all these years you never cleaned the lens? You can buy one in any video store for around 10 bucks.
