I open this thread cause I was unable to find help in any of others open. I started with Nero, and the tried both to use ImgBurn (same result) and to change the ASPI with the forcepackage. Still same result. I enclose both the ImgBurn and the Nero logs. Can anyone advice? Strongly appreciated. ImgBurn: I 21:02:30 ImgBurn Version 2.4.2.0 started! I 21:02:30 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:02:30 Total Physical Memory: 1.039.724 KB - Available: 292.680 KB I 21:02:30 Initialising SPTI... I 21:02:30 Searching for SCSI / ATAPI devices... I 21:02:30 Found 1 DVD-ROM/CD-RW and 1 DVD±RW! I 21:05:53 Operation Started! I 21:05:53 Source File: H:\pub\shared\stored\software\Bmw Dvd Navi Business Europe 2008-2.nrg I 21:05:53 Source File Sectors: 2.342.656 (MODE1/2048) I 21:05:53 Source File Size: 4.797.759.488 bytes I 21:05:53 Source File Volume Identifier: KN074EU16X11T01 I 21:05:53 Source File Application Identifier: Nero - Burning Rom I 21:05:53 Source File File System(s): ISO9660; Joliet I 21:05:53 Destination Device: [0:0:0] BENQ DVD DD EW162I 47F9 (I (USB) I 21:05:53 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2,4x) I 21:05:53 Destination Media Sectors: 4.173.824 I 21:05:53 Write Mode: DVD I 21:05:53 Write Type: DAO I 21:05:53 Write Speed: 1x I 21:05:53 Link Size: Auto I 21:05:53 Test Mode: No I 21:05:53 OPC: No I 21:05:53 BURN-Proof: Enabled I 21:05:53 Book Type Setting: DVD-ROM I 21:05:53 Advanced Settings - WOPC: Yes I 21:05:53 Optimal L0 Data Zone Capacity: 1.171.328 I 21:05:53 Optimal L0 Data Zone Method: ECC Block Boundary I 21:05:53 Filling Buffer... (40 MB) I 21:05:55 Writing LeadIn... W 21:06:10 Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In W 21:06:10 Retrying (1 of 20)... W 21:06:23 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:06:23 Retrying (2 of 20)... W 21:06:36 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:06:36 Retrying (3 of 20)... W 21:06:50 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:06:50 Retrying (4 of 20)... W 21:07:04 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:07:04 Retrying (5 of 20)... W 21:07:19 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:07:19 Retrying (6 of 20)... W 21:07:33 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:07:33 Retrying (7 of 20)... W 21:07:48 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:07:48 Retrying (8 of 20)... W 21:08:02 Retry Failed - Reason: Session Fixation Error Writing Lead In W 21:08:02 Retrying (9 of 20)... W 21:08:13 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:13 Retrying (10 of 20)... W 21:08:14 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:14 Retrying (11 of 20)... W 21:08:15 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:15 Retrying (12 of 20)... W 21:08:16 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:16 Retrying (13 of 20)... W 21:08:16 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:16 Retrying (14 of 20)... W 21:08:17 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:17 Retrying (15 of 20)... W 21:08:18 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:18 Retrying (16 of 20)... W 21:08:19 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:19 Retrying (17 of 20)... W 21:08:20 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:20 Retrying (18 of 20)... W 21:08:20 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:20 Retrying (19 of 20)... W 21:08:21 Retry Failed - Reason: Power Calibration Area Is Full W 21:08:21 Retrying (20 of 20)... W 21:08:22 Retry Failed - Reason: Power Calibration Area Is Full E 21:08:32 Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In I 21:08:32 Synchronising Cache... W 21:08:42 User opted to skip the 'Close Track/Session/Disc' functions. E 21:08:42 Failed to Write Image! E 21:08:42 Operation Failed! - Duration: 00:02:49 I 21:08:42 Average Write Rate: N/A - Maximum Write Rate: N/A Nero log: 1C82********* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 2:54:32 NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <BENQ DVD DD EW162I> Version: 47F9 - HA 1 TA 3 - 7.5.7.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SCSIVAX DVD/CD-ROM >Version: 2.7a - HA 1 TA 2 - 7.5.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : MATSHITA UJDA775 DVD/CDRW atapi Port 0 ID 0 DMA: On DiskPeripheral : ST96812AS iaStor Port 1 ID 0 DMA: On CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 0 DMA: Off === CDRom-Device-Map === MATSHITA UJDA775 DVD/CDRW E: CDRom0 SCSIVAX DVD/CD-ROM F: CDRom2 NERO IMAGEDRIVE2 G: CDRom1 BENQ DVD DD EW162I I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1015MB (1039724kB) Free physical memory: 192MB (196672kB) Memory in use : 81 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.10.2008 Burn DVD Image 9:16:05 #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:16:05 #2 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 9:16:05 #3 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2342655 (520:35.30, 4575MB) 9:16:05 #4 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 9:16:05 #5 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: BENQ DVD DD EW162I, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 66 Disc Application Code: 0, Extended Information Indicators: 0 9:16:05 #6 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:16:05 #7 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 2342656 (2342656) = #2342656/520:35.31 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2342656 blocks [Main] -------------------------------------------------------------- 9:16:05 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [BENQ DVD DD EW162I] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4797759488, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2342656 | 2342656 | 0x00 0 | 1 | 1 | 0x41 | 2342656 | 2342656 | 0x00 2342656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 9:16:05 #9 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:16:05 #10 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 9:16:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:16:05 #12 Text 0 File DVDPlusDualLayer.cpp, Line 470 Disc finalized, LBA total Image size: 2342656 (4575MB), Last LBA L0: 1171343 (2287MB) 9:16:05 #13 Text 0 File DVDPlusDualLayer.cpp, Line 635 L0 Data Zone Capacity set to 1171344 (11DF90h, 2287MB) -> OK, confirmed setting 9:16:05 #14 CDR -1205 File DVDPlusDualLayer.cpp, Line 662 Burning Layer 1 9:16:05 #15 Text 0 File DVDPlusDualLayer.cpp, Line 672 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 9:16:05 #16 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 14DF90 h (LBN: 11DF90 h, 2287 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 66 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 52 49 54 45 4B - 00 00 00 53 30 34 42 40 ...RITEK...S04B@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 9:16:05 #17 Text 0 File DVDR.cpp, Line 7051 Drive: BENQ DVD DD EW162I Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 9:16:05 #18 CDR -1211 File DVDR.cpp, Line 6123 Book Type set to: DVD-ROM 9:16:05 #19 Text 0 File DVDPlusRW.cpp, Line 662 Start write address at LBA 0 DVD high compatibility mode: Yes 9:16:26 #20 SPTI -1176 File SCSIPassThrough.cpp, Line 293 I: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 Buffer x06f02400: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9:16:26 #21 CDR -1176 File Writer.cpp, Line 278 Session fixation error I: BENQ DVD DD EW162I 9:16:26 #22 SPTI -1176 File SCSIPassThrough.cpp, Line 293 I: CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03 9:16:26 #23 Phase 127 File dlgbrnst.cpp, Line 1746 Generating DVD high compatibility borders 9:16:26 #24 Text 0 File DVDR.cpp, Line 7051 Drive: BENQ DVD DD EW162I Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 9:16:26 #25 CDR -1176 File WriterStatus.cpp, Line 161 Session fixation error I: BENQ DVD DD EW162I 9:16:26 #26 TRANSFER -24 File WriterStatus.cpp, Line 161 Could not perform end of Disc-at-once 9:16:26 #27 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3,324 KB/s) 9:16:26 #28 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 9:16:26 #29 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 10/5/2006 4:42:42 File 'Drivers\PXHELP20.SYS': Ver=3.00.67a, size=43872 bytes, created 2/23/2008 4:38:33 (Prassi/Veritas driver for win 2K) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 8:05:44 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks a lot!
The only reliable media is Verbatim DVD+R DL 2.4x (MKM-001-00 dye) made in Singapore burned at 2.4x. Total Physical Memory: 1.039.724 KB - Available: 292.680 KB Shut down programs running in the background. Try to get something like this: I 05:43:59 ImgBurn Version 2.4.2.0 started! I 05:43:59 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 05:43:59 Total Physical Memory: 1,046,512 KB - Available: 785,544 KB
This is not one of Neros better versions, update to 7.10.1.0 from here http://www.filehippo.com/download_nero_7_premium/?2893
Folks... thanks, but... - I updated to nero 7.10.1.0 - I bought Verbatim discs... - I emptied from background applications ...same damn Session Fixation Error... Here in the latest log. Help appreciated. Since you are the gurus... my success in your hands... rperezg Roberto 1C82- Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <BENQ DVD DD EW162I> Version: 47F9 - HA 1 TA 1 - 7.10.1.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <MATSHITA UJDA775 DVD/CDRW>Version: 1.00 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : MATSHITA UJDA775 DVD/CDRW atapi Port 0 ID 0 DMA: On DiskPeripheral : ST96812AS iaStor Port 1 ID 0 DMA: On === CDRom-Device-Map === MATSHITA UJDA775 DVD/CDRW E: CdRom0 BENQ DVD DD EW162I I: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1015MB (1039724kB) Free physical memory: 312MB (319868kB) Memory in use : 69 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.10.2008 Burn DVD Image 20:30:41 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 20:30:41 #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 20:30:42 #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2342655 (520:35.30, 4575MB) 20:30:42 #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 20:30:42 #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: BENQ DVD DD EW162I, Media type: DVD+R9 Double Layer Disc Manufacturer ID: MKM, Media Type ID: 003, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 0 20:30:42 #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:30:42 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 2342656 (2342656) = #2342656/520:35.31 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2342656 blocks [I: BENQ DVD DD EW162I] -------------------------------------------------------------- 20:30:42 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [I: BENQ DVD DD EW162I] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4797759488, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2342656 | 2342656 | 0x00 2342656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 20:30:42 #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 20:30:42 #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 20:30:42 #11 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 2.4x (3.324 KB/s) 20:30:42 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 20:30:42 #13 Text 0 File DVDPlusDualLayer.cpp, Line 494 Disc finalized, LBA total Image size: 2342656 (4575MB), Last LBA L0: 1171327 (2287MB) 20:30:42 #14 Text 0 File DVDPlusDualLayer.cpp, Line 659 L0 Data Zone Capacity set to 1171328 (11DF80h, 2287MB) -> OK, confirmed setting 20:30:42 #15 CDR -1205 File DVDPlusDualLayer.cpp, Line 686 Burning Layer 1 20:30:42 #16 Text 0 File DVDPlusDualLayer.cpp, Line 696 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 20:30:42 #17 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 14DF80 h (LBN: 11DF80 h, 2287 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 0 h Disc Manufacturer ID: MKM..... Media type ID: 003 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 00 4D 4B 4D 00 00 - 00 00 00 30 30 33 00 40 ...MKM.....003.@ 25 25 37 0C 02 2D 66 02 - 2D 66 21 23 0D 0E 14 14 %%7..-f.-f!#.... 02 01 01 10 00 21 23 0D - 0E 14 14 02 01 01 10 00 .....!#......... 20:30:42 #18 Text 0 File DVDR.cpp, Line 7402 Drive: BENQ DVD DD EW162I Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 20:30:42 #19 CDR -1211 File DVDR.cpp, Line 6460 Book Type set to: DVD-ROM 20:30:42 #20 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 20:30:42 #21 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 20:30:58 #22 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 Buffer x07bc0040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20:30:58 #23 CDR -1176 File Writer.cpp, Line 303 Session fixation error I: BENQ DVD DD EW162I 20:30:58 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03 20:30:58 #25 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 20:31:16 #26 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 0 20:31:16 #27 Text 0 File DVDR.cpp, Line 7402 Drive: BENQ DVD DD EW162I Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 20:31:16 #28 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error I: BENQ DVD DD EW162I 20:31:16 #29 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 20:31:17 #30 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 2.4x (3.324 KB/s) 20:31:17 #31 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 20:31:32 #32 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x72 Sense Qual: 0x01 CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01 20:31:33 #33 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 20:31:34 #34 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
You did? Disc Manufacturer ID: MKM, Media Type ID: 003, Your burner which was manfactured in 2005 may not handle these newer Verbs. You need Verbatim DVD+R DL 2.4x (MKM-001-00 dye) made in Singapore.
- Regarding memory: Well... I tried. How can I swith off more background processes that are not showing as applications in "task manager" nor have tray icons??? (Like ipodservice.exe) ???????? - Regarding discs: How do you tell a Verb is a 001 and not a 003 from the packaging? Neither the 5 pack box nor the DVD case itself seem to say it. Thanks,
