Trying to make a copy on a dual layer, it starts out on "creating the image for burning" and that takes way longer than it used to before i reinstalled windows mce. I should also mention I switched my laptop hardrive from a 4200rpm to a 7200rpm.. DMA is enabled. I'm also using AnyDvd for decryption. It must be something to do with the reading drive or some setting that is limiting it. Is there any way to copy a disc without making a temp file? heres my log: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB04 - HA 1 TA 1 - 7.9.6.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <QSI CDRW/DVD SBW-242>Version: UD30 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : HTS721010G9AT00 atapi Port 0 ID 0 DMA: On CdRomPeripheral : QSI CDRW/DVD SBW-242 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === QSI CDRW/DVD SBW-242 D: CdRom0 TSSTcorp CD/DVDW SH-S182M E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 894MB (916464kB) Free physical memory: 699MB (715848kB) Memory in use : 21 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.6.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 6:07:20 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:07:21 PM #2 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 6:07:21 PM #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-ROM Last LBA on layer 0 = 1908735 / 0x1D1FFF / 3727MB S01 T01 Con 0x14 Start 0 Len 3788528 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 6:07:21 PM #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 3788528 = 3788528, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:07:21 PM #5 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 6:07:21 PM #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 3788527 (841:53.52, 7399MB) 6:07:21 PM #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 6:07:21 PM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:07:21 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 3788528 (3788528) = #3788528/841:53.53 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3788528 blocks [Image Recorder] -------------------------------------------------------------- 6:07:21 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7758905344, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3788528 | 3788528 | 0x00 3788528 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:07:21 PM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 6:07:21 PM #12 Phase 120 File dlgbrnst.cpp, Line 1762 Creating the image for burning 6:07:21 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:07:21 PM #14 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 590400 6:43:43 PM #15 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 3788528 (39CEF0h), length 0 blocks 6:43:44 PM #16 Phase 121 File dlgbrnst.cpp, Line 1762 Creating Image completed successfully 6:43:45 PM #17 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 6:43:47 PM #18 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:43:47 PM #19 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 6:43:50 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:43:51 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 7758905344 CUES: LBRK: Last LBA on layer 0 = 1908735 / 0x1D1FFF / 3727MB MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Joe Smith\My Documents\TempImage.nrg> 6:43:52 PM #3 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 6:43:53 PM #4 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 3788527 (841:53.52, 7399MB) 6:43:53 PM #5 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 6:43:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R9 Double Layer Disc Manufacturer ID: RITEK, Media Type ID: S04, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 3 6:43:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:43:53 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 3788528 (3788528) = #3788528/841:53.53 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3788528 blocks [E: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 6:43:53 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7758905344, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 3788528 | 0 | 0x00 3788528 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 6:43:53 PM #10 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 6:43:53 PM #11 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 6:43:53 PM #12 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 6x (8,310 KB/s) 6:43:56 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:44:31 PM #14 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x0611e740: Len x804 6:44:31 PM #15 Text 0 File DVDPlusDualLayer.cpp, Line 659 L0 Data Zone Capacity set to 1908736 (1D2000h, 3728MB) -> OK, confirmed setting 6:44:31 PM #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 686 Burning Layer 1 6:44:31 PM #17 Text 0 File DVDPlusDualLayer.cpp, Line 696 Start writing layer 1 at address 0 (0h) Recording mode: unknown Recording Mode 6:44:31 PM #18 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 01 40 ...RITEK...S04.@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 6:44:31 PM #19 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 01 40 ...RITEK...S04.@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 6:44:31 PM #20 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: RITEK... Media type ID: S04 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 64 Media Specific [16..63]: 00 00 03 52 49 54 45 4B - 00 00 00 53 30 34 01 40 ...RITEK...S04.@ 25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l...... 02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................ 6:44:31 PM #21 Text 0 File DVDR.cpp, Line 8372 Drive: TSSTcorp CD/DVDW SH-S182M Book Type request [TSST]: DVD-ROM Changing the Book Type was finished successfully, return code 0 6:44:31 PM #22 CDR -1207 File DVDR.cpp, Line 6477 Book Type automatically set to: DVD-ROM 6:44:31 PM #23 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 6:44:31 PM #24 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 6:53:32 PM #25 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969 Burning Layer 2 6:53:32 PM #26 Text 0 File DVDPlusDualLayer.cpp, Line 1980 Perform layer 1 to 2 jump before writing at address 1908736 (1D2000h) 7:02:42 PM #27 Text 0 File WriterStatus.cpp, Line 113 <E: TSSTcorp CD/DVDW SH-S182M> start writing Lead-Out at LBA 3788528 (39CEF0h), length 0 blocks 7:03:30 PM #28 Text 0 File DVDPlusRW.cpp, Line 935 EndDAO: Last written address 3788528 7:03:30 PM #29 Phase 37 File dlgbrnst.cpp, Line 1762 Burn process completed successfully at 6x (8,310 KB/s) 7:03:31 PM #30 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 7:03:36 PM #31 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 7:03:37 PM #32 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I think you're right. From looking at the time stamps it appears you are ripping @ 3.42 megs/sec or roughly 2.4x. I know in recode there is a radio button you can check & uncheck for "advanced analysis". Is this an option in Disk Copy(Your log doesn't mention it and I'm not at a 'puter with a DVD burner at the moment)? If so, deselect it. This would definitely increase the read speed. I will do some more research when I get in front of a 'puter with a burner.
I tried using the external burner as the reading drive, it's reading at a faster speed and has helped a little but thats still not as fast as before. I think it never used to make a temp file on the hard drive at all. I don't remember the movie ever being auto-ejected from the reading drive like it does now after this "creating image" happens... as if it never really happened before. I read about the 'On the fly' option and i guess it sounds like I used to have something like that going on. Nero is telling me my internal drive will only read at 4x... thats definately wrong. It should atleast be 8x. Driver/Firmware version problem maybe?? I've tried looking for updates for it, with no results.
You have the most current firmware for your drive. I didn't find anything in Nero that you can select or deselect to improve performance. The only other thing I can think of is the DMA setting on your drives. Your OS will drop the DMA setting if it starts to encounter read errors. Do you know how to see wht the DMA setting is? Here's a guide on how to check and reset the DMA on your system. Other than that, I'm stumped. Check your DMA via the guide and let us know what you find. If that doesn't do it, I'll see if I can attract some of the addicts.
I have tried un/reinstalling the IDE Controller and channels. Even tried changing around the drivers for them and got same slow speed or got a "device cannot start properly" error. heres some screens of what I see with normal windows install: Also here is information on the drive I'm using from PCWizard07: General Information : IDE Controller : Acer Labs Incorporated (ALi/ULi) ALI M5229 EIDE Controller Informations CD-Rom QSI CD-RW/DVD-ROM SBW-242 : IDE Channel : #2 - Master Drive Manufacturer : QSI Model : QSI CD-RW/DVD-ROM SBW-242 Revision : UD30 Serial ATA : No IORDY : Yes LBA Mode : Yes DMA Mode : Yes TCQ Mode : No NCQ Mode : No Multiword DMA Mode : 2 PIO Mode : PIO 4 UDMA Mode max. : 2 (ATA-33) UDMA Mode Enabled : 2 (ATA-33) Rotation Control : CLV CD-R Read : Yes CD-RW Reading : Yes DVD-Rom Reading : Yes DVD-RAM Reading : No DVD-R Reading : Yes DVD-RW Reading : Yes DVD+R Reading : Yes DVD+RW Reading : Yes DVD+R DL Reading : No DVD BD Reading : No DVD BD-RE Reading : No DVD BD-R Reading : No DVD BD-Rom Reading : No DVD HD Reading : No CD-R Writing : Yes CD-RW Writing : Yes DVD-RAM Writing : No DVD-R Writing : No DVD+R Writing : No DVD-RW Writing : No DVD+RW Writing : No DVD+R DL Writing : No DVD BD Writing : No DVD BD-RE Writing : No DVD BD-R Wrting : No DVD HD Writing : No DVD HD-RW Writing : No Mount Rainier (MRW) : No Buffer Underrun : Yes JustLink : No LabelFlash : No LightScribe : No LightScribe Drive Speed : No SolidBurn : No Method 2 : Yes CD-Audio Support : Yes MultiSession or Photo-CD : Yes Side Change Capable : No Reading CD-Rom : 24x (4226 KB/s) Reading DVD-Rom : 8x Writing CD-R : 24x (4226 KB/s) Writing CD-RW : 14x Region Code : Installed Region : 0 User Changes : 4 Vendor Changes : 4 RPC Phase II : Yes
It appears to me that your DMA is set properly. I checked a Recode log of mine where I recoded a DL disk I had already ripped to my HD (I rip to my hd, then burn. Saves me some disks). From the time stamps, it took recode 54 minutes to re-analyse & burn the dl disk. It took 19 minutes to compile the files from my harddrive prior to burning. It took your system 36 minutes to read & compile from your drive. It seems like a big difference but hard drive through-put is faster than dvd drive. One thing I didn't ask before, when you re-loaded windows mce, did you reload the same version of Nero you had before? (BTW, When I do dls, I generally burn with ImgBurn because you can control the burning speed better than Nero)
