Any help would be great thanks in advance! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 11/20/2005 9:48:20 PM ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM Nero version: 6.3.1.20 Recorder: <LITE-ON DVDRW SOHW-1613S>Version: AS04 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <LITE-ON DVDRW SOHW-1613S>Version: AS04 - HA 1 TA 0 - 6.3.1.20 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380012A atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1613S atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1613S E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 73400320 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 502MB (515052kB) Free physical memory: 127MB (130268kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.11.2007 UDF/ISO compilation 2:22:40 AM #1 Phase 112 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation started 2:22:41 AM #2 Phase 114 File dlgbrnst.cpp, Line 1855 DVD-Video files reallocation completed (no file modified) 2:22:41 AM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 2:22:41 AM #4 Phase 111 File dlgbrnst.cpp, Line 1855 DVD-Video files sorted 2:22:41 AM #5 Text 0 File Reader.cpp, Line 126 Reader running 2:22:41 AM #6 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW SOHW-1613S running 2:22:41 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:22:41 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:22:41 AM #9 Text 0 File Burncd.cpp, Line 3173 Turn on Disc-at-once, using DVD media 2:22:41 AM #10 Text 0 File DlgWaitCD.cpp, Line 247 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1773343 (394:04.43, 3463MB) 2:22:41 AM #11 Text 0 File DlgWaitCD.cpp, Line 259 Write in overburning mode: NO (enabled: CD) 2:22:41 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162 Recorder: LITE-ON DVDRW SOHW-1613S, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 2:22:41 AM #13 Text 0 File DlgWaitCD.cpp, Line 420 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:22:41 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1773344 (1773344) = #1773344/394:4.44 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1773344 blocks [LITE-ON DVDRW SOHW-1613S] -------------------------------------------------------------- 2:22:42 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [LITE-ON DVDRW SOHW-1613S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3631808512, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1773344 | lead-out | 1 | 0x00 | 0x41 2:22:42 AM #16 Phase 24 File dlgbrnst.cpp, Line 1855 Caching of files started 2:22:42 AM #17 Text 0 File Burncd.cpp, Line 4183 Cache writing successful. 2:22:42 AM #18 Phase 25 File dlgbrnst.cpp, Line 1855 Caching of files completed 2:22:42 AM #19 Phase 28 File dlgbrnst.cpp, Line 1855 Speed measurement started 2:22:42 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:25:16 AM #21 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW SOHW-1613S> start writing Lead-Out at LBA 1773344 (1B0F20h), lenght 0 blocks 2:25:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 2:25:16 AM #23 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 2:25:16 AM #24 Phase 29 File dlgbrnst.cpp, Line 1806 Speed measurement completed: 17x (23,570 KB/s) 2:25:16 AM #25 Phase 32 File dlgbrnst.cpp, Line 1855 Simulation started at 4x (5,540 KB/s) 2:25:16 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:25:16 AM #27 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 11:05,158 (665158ms) -> OK 2:25:16 AM #28 Text 0 File DVDR.cpp, Line 1942 Recording mode: Sequential Recording Mode 2:25:16 AM #29 Text 0 File Mmc.cpp, Line 20531 Set BUFE: supported -> ON , SMART-BURN : ON 2:25:16 AM #30 Text 0 File DVDR.cpp, Line 2083 Start write address at LBA 0 DVD high compatibility mode: Yes 2:25:16 AM #31 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:25:19 AM #32 SCSI -1046 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x085E0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 2:25:19 AM #33 CDR -1046 File Writer.cpp, Line 304 Illegal disc 2:25:19 AM #34 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 2:25:19 AM #35 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 2:25:19 AM #36 Text 0 File DVDR.cpp, Line 2325 EndDAO: Last written address was -1 2:25:19 AM #37 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 2:25:19 AM #38 Text 0 File dlgbrnst.cpp, Line 1713 Set remaining time: 0:00,000 (0ms) -> OK 2:25:19 AM #39 Phase 34 File dlgbrnst.cpp, Line 1855 Simulation failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 11/20/2005 9:48:20 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 4:00:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your version of Nero is quite old, try for an update from here http://www.filehippo.com/download/7717bb2aa35a8a6b405b8322e5dfe50b/download/ Latest firmware is ASO6 from here http://www.liteonit.com/DOWNLOADS/ODD/SOHW-1613S/firmware/DR16AS06.zip DMA needs to be on, heres a guide to turn back on http://forums.afterdawn.com/thread_view.cfm/260038 These are horrible discs, try Verbatim or Sony (made in Japan)
Thanks for your kind words in my shoutbox, only too pleased to help ,I trust you got things sorted out....welcome to AD...Cheers.
