Spiderchip flashed, no booting - now what??

Admitedly, I am as wet behind the ears as it gets. I followed the directions from a website...

When i installed the spiderchip, it came up with the standard cromwell bios. I toggeld over to the flash bios from disc option, and put a xecuter2 bios (bios.bin) disc in the tray. it showed the flashing progress bar, and completed successfully. When it powered down and back up, the console started for about .5 seconds, shut off, tired it two more times, and on the third, stayed on with blinking green/red power.

I've done quite a bit of searching before posting this, so please don't flame me. I figure the bios either didn't flash correctly, or it was a bad copy. Either way, it appears I'm stuck with no workable bios on the chip. Are there any homemade fixes for the spiderchip to try to flash it again?

THANKS!!

 

try double checking your wires on the chip mine did same thing a wire just came loose good luck

 

Agreed - unfortunately I did that nearly until by fingers bled. It's definately not the wiring or alignment issue. I'm pretty sure it's a bad flash, but I don't know how to recover from this.

 

?

 

Just shot you an email... Is Evox the bios that will allow backups?

 

yes it is i will also include halo2 killswitch and 007 everything or nothing sent you an e0mail also but not sure if it went threw yet

 

i have paypal now

 

sorry but foe some reason paypal is not accepting my card?????? if you could help it would be great or just send money order would like to get paypal working though sorry i am not e-mailing but account went crazy

 

llllllllllllll

 

it is also a hacked bios so you can play backups

 

would you like to call me or for me to call you and which number to use

 

Call me on my mobile 2476.. thanks

 

dose anyone know if the Slayer Evox auto-installer V2.6 Would work with the spider chip?

 

I've also had a bad flash w/ my spiderchip, been all over the net, apparently there is no programmer out that will attach to the spiderchip to flash without using a CD, does anyone know of a way to reflash a bad flashed spiderchip?

 

Mmmm seems to be a trend here, I also had a bad flash! I had two spider chips & both seem to flash ok but would not boot after. Is there a programmer out for it yet?

 

if anyone knows of a programmer please please let me know, and what did you flash your chip with? which version bios? i've tried doing a hotswap but when i uplug my xchip it just reboots my xbox, anyone know how to get it not to reboot when pulling off an xchip and trying to do a hotswap flash?....

 

i used evox bios m8_16 for my install works great

 

?

 

That email doesn't work? i got a return.

 

I thought that the evox M8_16 only works on the version 1.6. Have you tried using that flash on xboxes other than the 1.6.