spiderchip with no controller function

Discussion in 'Xbox - Hardware boot discussion' started by srdavis36, Mar 2, 2005.

  1. srdavis36

    srdavis36 Member

    Joined:
    Mar 2, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Help! I bought a spiderchip version 1.1 for my x-box v1.0. Spider bios loads perfectly but there's no controller function to select load functions. Does anybody have any suggestions ? Or is it a bad spiderchip from company?
     
    srdavis36, Mar 2, 2005
    #1
  2. kssting

    kssting Member

    Joined:
    Feb 12, 2005
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Are you using a microsoft controller? Dont ask me why but my generic controller wouldnt work but the original controller worked fine to load the bios.
     
    kssting, Mar 5, 2005
    #2
  3. ejg398

    ejg398 Member

    Joined:
    Mar 17, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    I noticed that if it is an after market controller power up the xbox and unplug and plug the controller back in an it will work
     
    ejg398, Mar 17, 2005
    #3
  4. srdavis36

    srdavis36 Member

    Joined:
    Mar 2, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    everything worked fine after i used microsoft controller.
     
    srdavis36, Mar 17, 2005
    #4
  5. aliasme

    aliasme Member

    Joined:
    Jun 19, 2003
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    16
    what the difference between microsoft controller and xbox controller? I'm having the same problem.
     
    aliasme, Apr 7, 2005
    #5
  6. srdavis36

    srdavis36 Member

    Joined:
    Mar 2, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    the difference is the power the controller takes from motherboard.but everything worked fine after i used microsoft controller.had no problem after that with the spiderchip.
     
    srdavis36, Apr 8, 2005
    #6
  7. aliasme

    aliasme Member

    Joined:
    Jun 19, 2003
    Messages:
    35
    Likes Received:
    0
    Trophy Points:
    16
    I just borrowed a controller from a friend. "MadCats" or "Madcatz" the model number is 4516. I powered on the xbox with the chip, controller connected, disconnected the controller. connected it again, and now I can choose between the options. Conclusion: I could not use the original controller provided with by xbox, with the xbox 1.6. I had to use the one from Madcats.
     
    aliasme, Apr 8, 2005
    #7

Share This Page