NEW Update for the Starview Box Download the links and follow the instructions below - real easy http://www.skywonder.co.uk/GTRom v41.00.zip http://www.skywonder.co.uk/STAR VIEW_26012007_257eE_api.bin http://www.zen29306.zen.co.uk/winrar300.exe Instructions 1) Plug in the RS232 cable into the serial port on the pc and the other end into the back of the box. 2) Open the software "GT Rom" and click "BIN FILE", select the new file given called "STAR VIEW_H20070126_257eE_api". This will show up in the space. 3) Switch on the box. 4) Once you see "on" on the box or a channel number, press Download on the program…this will load the image on to the box and will take approximately 2mins. Once this is compete it will show you on the PC screen. Wait til you get "ON" on the box, and that means you can switch off and unplug. That's it your done. Run the scan as normal, Follow instructions for scanning if you are unsure. This time in the EMU screen choose SET DEFAULT KEY...then turn EMU on and EXIT. You may not need to do this bit. If when updating there Is a long delay, you can exit and start over the again.
i have a starview box that needs upgraded and have tried these links and followed instructions to the letter and all i get is a message telling me flash update failed can anyone help
Sorry mate, this is the only information I have, it worked perfectly on all the boxes i set up. Have you tried another rs232 cable, could it be defective??
i have to use a usb to serial cable because i dont have a port for a rs232 cable on my hard drive could this be the problem?
Sorry M8 but wouldnt know, suggest you speak to someone like Fekker who seems to have a fair amount of knowledge on this. Either that or use someone elses computer that has a RS connection. Best of luck - Jim
