starview

Hi Guys, just wondering if there is anything I can do or get to stop my channels scrambling? It is not a major problem as it only lasts a few seconds but it can be annoying. Would appericate any advise.

 

It could be work going on in your area , where abouts are you and what firmware have you got installed

 

I am in Dublin in the coolock area, not sure what you mean by firmware? But we on N.L. As I said its not a major problem but just keeps happening and is a bit annoying, it comes up saying bad or scrambled channel. Thanks

 

can you press menu > System Informationand tell me what it says please , and what channels is it most happening on or is it every channel

 

It says AP1 ver: 3.00_E Boot ver:7.0, 27th May 2007. And it happens on all stations

 

Sorry I had to go out , Your box needs to be updated to the latest firmwa*e

Can you count the vents on top

First Generation = 13 x 7 vents
Genuine = 25 x 7 vents
Clone = 18 x 7 vents

 

It is a genuine one 25x7

 

In Celts absence

You will need a null modem cable DB9F to DB9F.

Null modem info here

http://www.maplin.co.uk/Search.aspx?criteria=L71BT&DOY=2m6

If your pc does not have a serial port you will need a USB to serial port adapter to use in conjunction with the null modem cable.

USB Adapter info here

http://www.maplin.co.uk/Module.aspx?Modu...erial Adaptor

These two cable links are only for reference as they can be purchased alot cheaper on fleabay.

All firmware/loader can be found in the link at the end of my post marked Eamos FTA Library.

You will need the GTromloader, (Starview Software Uploader), found in the Starview software folder of the link.

You will need version 4.00 firmware found in the Starview firmware folder.

And please download the Starview PDF guide, this will give you step by step instructions on how to do everything.This can be found in the Starview Documentation folder in the link.

 

thanks for that, will try and let you know how i get on.

 

Youre Welcome.

 

Thanks Scouser