Trying To Boot - Getting NO Video Signal Out

Discussion in 'PC hardware help' started by Frankwm, Apr 14, 2009.

  1. Frankwm

    Frankwm Member

    Joined:
    Sep 20, 2004
    Messages:
    70
    Likes Received:
    0
    Trophy Points:
    16
    PC was fine last night - this morning no signal to monitor. At boot up (Windows XP Pro), HDD indicator light flashes on, Rom Drive lights flash on, no signal to monitor.

    I replaced the Power Supply (had a spare on hand). Same results as above.

    I found that the Video Card (Radeon 9800 Pro) cooling fan had completely broken loose from the heat sink. I replaced the broken Video Card Cooler with a Zalman VF700 Cooler (also happened to have that on hand). Same results as above.

    I temporarily replaced the HDD with an old one I had (I think it's working OK). Same results as above.

    Question: If the Video Card is shot, should the PC still boot to Windows (which it isn't doing) or could the problem be the CPU(AMD Athlon 64 3200+) or the Motherboard?
     
  2. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,169
    Likes Received:
    137
    Trophy Points:
    143
    try another videocard even a lowly pci videocard will still work. any beeps from motherboard speaker? try clearing the cmos battery as have found that to work sometimes to kickstart a stubborn system.
     
  3. Frankwm

    Frankwm Member

    Joined:
    Sep 20, 2004
    Messages:
    70
    Likes Received:
    0
    Trophy Points:
    16
    Thanks ddp. Looks like the Vid Card is fried. Ah well.
     

Share This Page