ubuntu ei toimi

Ubuntu dapper live cd jumittuu kohtaan "mounting root file system"10min
samoin breezy.

Asennus ei onnistu tuosta samastasyystä, osaisko joku tulkita tuota
tulostetta mikä oikein mättää.

ubuntu@ubuntu:~$ sudo dmesg
[4294667.296000] Linux version 2.6.15-21-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
[4294667.296000] BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000fb930
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126960 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 AMI ) @ 0x000fa970
[4294667.296000] ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
[4294667.296000] ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
[4294667.296000] ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
[4294667.296000] ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:3 APIC version 16
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/install/vmlinuz boot=casper initrd=/install/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash -- debian-installer/locale=fi kbd-chooser/method=fi-latin1
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 803.637 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.187000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.189000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.221000] Memory: 508596k/524224k available (1974k kernel code, 14984k reserved, 604k data, 288k init, 0k highmem)
[4294668.221000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.281000] Calibrating delay using timer specific routine.. 1608.54 BogoMIPS (lpj=804273)
[4294668.281000] Security Framework v1.0.0 initialized
[4294668.281000] SELinux: Disabled at boot.
[4294668.281000] Mount-cache hash table entries: 512
[4294668.281000] CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[4294668.281000] CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000 00000000 00000000 00000000
[4294668.281000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294668.281000] CPU: L2 Cache: 64K (64 bytes/line)
[4294668.281000] CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020 00000000 00000000 00000000
[4294668.281000] mtrr: v2.0 (20020519)
[4294668.281000] CPU: AMD Duron(tm) stepping 01
[4294668.281000] Enabling fast FPU save and restore... done.
[4294668.281000] Checking 'hlt' instruction... OK.
[4294668.285000] checking if image is initramfs... it is
[4294669.634000] Freeing initrd memory: 6798k freed
[4294669.651000] ACPI: Looking for DSDT ... not found!
[4294669.656000] ENABLING IO-APIC IRQs
[4294669.656000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.767000] NET: Registered protocol family 16
[4294669.767000] EISA bus registered
[4294669.767000] ACPI: bus type pci registered
[4294669.768000] PCI: PCI BIOS revision 2.10 entry at 0xfdab1, last bus=1
[4294669.768000] PCI: Using configuration type 1
[4294669.769000] ACPI: Subsystem revision 20051216
[4294669.778000] ACPI: Interpreter enabled
[4294669.778000] ACPI: Using IOAPIC for interrupt routing
[4294669.779000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.779000] PCI: Probing PCI hardware (bus 00)
[4294669.786000] Boot video device is 0000:01:00.0
[4294669.786000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.797000] ACPI: Power Resource [URP1] (off)
[4294669.797000] ACPI: Power Resource [URP2] (off)
[4294669.798000] ACPI: Power Resource [FDDP] (off)
[4294669.798000] ACPI: Power Resource [LPTP] (off)
[4294669.799000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294669.800000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294669.801000] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294669.801000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294669.802000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.803000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.803000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.804000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.804000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.804000] pnp: PnP ACPI init
[4294669.812000] pnp: PnP ACPI: found 10 devices
[4294669.812000] PnPBIOS: Disabled by ACPI PNP
[4294669.812000] PCI: Using ACPI for IRQ routing
[4294669.812000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.816000] PCI: Bridge: 0000:00:01.0
[4294669.816000] IO window: disabled.
[4294669.816000] MEM window: dbe00000-dfefffff
[4294669.816000] PREFETCH window: bbd00000-dbcfffff
[4294669.816000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.816000] audit: initializing netlink socket (disabled)
[4294669.816000] audit(1148210199.815:1): initialized
[4294669.817000] VFS: Disk quotas dquot_6.5.1
[4294669.817000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.817000] Initializing Cryptographic API
[4294669.817000] io scheduler noop registered
[4294669.817000] io scheduler anticipatory registered
[4294669.817000] io scheduler deadline registered
[4294669.817000] io scheduler cfq registered
[4294669.817000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[4294669.817000] isapnp: Scanning for PnP cards...
[4294670.174000] isapnp: No Plug & Play device found
[4294670.202000] PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[4294670.202000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.202000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.202000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.202000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.206000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.207000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294670.207000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.207000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.207000] mice: PS/2 mouse device common for all mice
[4294670.208000] EISA: Probing bus 0 at eisa.0
[4294670.208000] EISA: Detected 0 cards.
[4294670.208000] NET: Registered protocol family 2
[4294670.218000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)[4294670.218000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.218000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.219000] TCP: Hash tables configured (established 32768 bind 32768)
[4294670.219000] TCP reno registered
[4294670.219000] TCP bic registered
[4294670.219000] NET: Registered protocol family 1
[4294670.219000] NET: Registered protocol family 8
[4294670.219000] NET: Registered protocol family 20
[4294670.219000] Using IPI Shortcut mode
[4294670.219000] ACPI wakeup devices:
[4294670.219000] PCI0 USB1 USB2 USB3 USB4 EHCI USBD UAR1 AC9 MC9 ILAN SLPB
[4294670.219000] ACPI: (supports S0 S1 S4 S5)
[4294670.219000] Freeing unused kernel memory: 288k freed
[4294670.235000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.392000] vga16fb: initializing
[4294670.392000] vga16fb: mapped to 0xc00a0000
[4294670.600000] Console: switching to colour frame buffer device 80x25
[4294670.600000] fb0: VGA16 VGA frame buffer device
[4294671.785000] Capability LSM initialized
[4294673.138000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[4294673.138000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 20 (level, low) -> IRQ 169
[4294673.138000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 9
[4294673.138000] VP_IDE: chipset revision 6
[4294673.138000] VP_IDE: not 100% native mode: will probe irqs later
[4294673.138000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[4294673.138000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hdaMA, hdbMA
[4294673.138000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdcMA, hddMA
[4294673.138000] Probing IDE interface ide0...
[4294673.524000] hda: SAMSUNG SP0842N, ATA DISK drive
[4294673.779000] hdb: SAMSUNG SP1604N, ATA DISK drive
[4294673.874000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.883000] Probing IDE interface ide1...
[4294674.677000] hdc: PHILIPS DVDR1660P1, ATAPI CD/DVD-ROM drive
[4294675.391000] hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive
[4294675.444000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.468000] hda: max request size: 1024KiB
[4294675.505000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
[4294675.505000] hda: cache flushes supported
[4294675.505000] hda:<4>hda: dma_timer_expiry: dma status == 0x61
[4294705.505000] hda: DMA timeout error
[4294705.505000] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[4294705.505000] ide: failed opcode was: unknown
[4294705.542000] hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x61
[4294735.542000] hda: DMA timeout error
[4294735.542000] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[4294735.542000] ide: failed opcode was: unknown
[4294735.566000] hda5 >
[4294735.567000] hdb: max request size: 1024KiB
[4294735.567000] hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
[4294735.567000] hdb: cache flushes supported
[4294735.567000] hdb: hdb1 hdb2 < hdb5 hdb6 >
[4294735.612000] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294735.612000] Uniform CD-ROM driver Revision: 3.20
[4294735.638000] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
[4294755.672000] hda: dma_timer_expiry: dma status == 0x61
[4294765.672000] hda: DMA timeout error
[4294765.672000] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[4294765.672000] ide: failed opcode was: unknown
[4294785.914000] hda: dma_timer_expiry: dma status == 0x61
[4294795.914000] hda: DMA timeout error
[4294795.914000] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[4294795.914000] ide: failed opcode was: unknown
[4294796.686000] usbcore: registered new driver usbfs
[4294796.686000] usbcore: registered new driver hub
[4294796.690000] USB Universal Host Controller Interface driver v2.3
[4294796.691000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[4294796.691000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[4294796.691000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294796.692000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294796.692000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000dc00
[4294796.693000] hub 1-0:1.0: USB hub found
[4294796.693000] hub 1-0:1.0: 2 ports detected
[4294796.794000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[4294796.794000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
[4294796.794000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294796.794000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294796.794000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000e000
[4294796.795000] hub 2-0:1.0: USB hub found
[4294796.795000] hub 2-0:1.0: 2 ports detected
[4294796.896000] ACPI: PCI Interrupt 0000:00:10.2 -> GSI 21 (level, low) -> IRQ 177
[4294796.896000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
[4294796.896000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294796.896000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294796.896000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e400
[4294796.897000] hub 3-0:1.0: USB hub found
[4294796.897000] hub 3-0:1.0: 2 ports detected
[4294796.998000] ACPI: PCI Interrupt 0000:00:10.3 -> GSI 21 (level, low) -> IRQ 177
[4294796.998000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[4294796.998000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294796.998000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294796.998000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000e800
[4294796.999000] hub 4-0:1.0: USB hub found
[4294796.999000] hub 4-0:1.0: 2 ports detected
[4294797.106000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[4294797.106000] PCI: Via IRQ fixup for 0000:00:10.4, from 3 to 1
[4294797.106000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294797.107000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[4294797.107000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xdffffe00
[4294797.107000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294797.107000] hub 5-0:1.0: USB hub found
[4294797.107000] hub 5-0:1.0: 8 ports detected
[4294798.768000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294798.973000] ISO 9660 Extensions: RRIP_1991A
[4294799.063000] loop: loaded (max 8 devices)
[4294799.088000] Registering unionfs 1.1.2
[4294799.292000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294877.075000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294877.075000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 185
[4294877.075000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 9
[4294877.076000] eth0: VIA Rhine II at 0x1d400, 00:11:09:7b:7b:34, IRQ 185.
[4294877.077000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[4294895.983000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294897.191000] NET: Registered protocol family 17
[4294899.306000] Linux agpgart interface v0.101 (c) Dave Jones
[4294899.542000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[4294899.606000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294900.090000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294900.116000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294902.664000] NET: Registered protocol family 10
[4294902.664000] lo: Disabled Privacy Extensions
[4294902.665000] IPv6 over IPv4 tunneling driver
[4294903.318000] Floppy drive(s): fd0 is 1.44M
[4294903.377000] FDC 0 is a post-1991 82077
[4294903.513000] input: PC Speaker as /class/input/input1
[4294903.677000] Real Time Clock Driver v1.12
[4294903.883000] parport: PnPBIOS parport detected.
[4294903.883000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294904.075000] nvidia: module license 'NVIDIA' taints kernel.
[4294904.086000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[4294904.088000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8756 Wed Mar 29 14:26:26 PST 2006
[4294904.140000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[4294905.169000] ts: Compaq touchscreen protocol output
[4294905.916000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
[4294905.916000] PCI: Via IRQ fixup for 0000:00:11.5, from 3 to 9
[4294905.916000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294909.513000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294909.513000] md: bitmap version 4.39
[4294910.612000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294913.113000] eth0: no IPv6 routers present
[4294914.870000] cdrom: open failed.
[4294941.551000] ACPI: Power Button (FF) [PWRF]
[4294941.551000] ACPI: Power Button (CM) [PWRB]
[4294941.551000] ACPI: Sleep Button (CM) [SLPB]
[4294941.791000] ibm_acpi: ec object not found
[4294941.843000] pcc_acpi: loading...
[4294943.636000] powernow: No powernow capabilities detected
[4294976.447000] apm: BIOS not found.
[4295002.361000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4295002.361000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4295002.361000] ide: failed opcode was: 0xec
[4295002.949000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4295002.949000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4295002.949000] ide: failed opcode was: 0xec
[4295003.331000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4295003.331000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4295003.331000] ide: failed opcode was: 0xec
[4295003.347000] hdc: drive_cmd: status=0xd0 { Busy }
[4295003.347000] ide: failed opcode was: 0xa1
[4295003.624000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4295003.624000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4295003.624000] ide: failed opcode was: 0xec
[4295013.955000] Bluetooth: Core ver 2.8
[4295013.955000] NET: Registered protocol family 31
[4295013.955000] Bluetooth: HCI device and connection manager initialized
[4295013.955000] Bluetooth: HCI socket layer initialized
[4295014.448000] Bluetooth: L2CAP ver 2.8
[4295014.448000] Bluetooth: L2CAP socket layer initialized
[4295015.326000] Bluetooth: RFCOMM socket layer initialized
[4295015.326000] Bluetooth: RFCOMM TTY layer initialized
[4295015.326000] Bluetooth: RFCOMM ver 1.7
ubuntu@ubuntu:~$

ubuntu@ubuntu:~$ sudo lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:06.0 Communication controller: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
0000:00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
0000:01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 (rev a1)ubuntu@ubuntu:~$