Its driving me mad.. for a while now all my burns fail and say "burn process failed at..." i've tried all the speeds and nothing works. I got told to look at my primary ide and it says my current transfer mode in device 0 is "ultra DMA mode 6" and my device 1's curent transfer mode is not applicable. MY secondary ide channel device 0 says mode 5 and my device 1 is mode 2. It is not my drive as it was working fine for a bit and then it kept giving error messages so i tried buying a new one and it still says the same. I dont understand this but my error log for one of them was Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 (Nero Express) Recorder: <LITE-ON DVDRW LH-20A1P> Version: KL0N - HA 1 TA 1 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <DVD-ROM 16X >Version: 5.FV - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVD-ROM 16X atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-20A1P atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVD-ROM 16X D: CdRom0 LITE-ON DVDRW LH-20A1P E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte BUFE : 0 Physical memory : 479MB (490864kB) Free physical memory: 259MB (265992kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.9.2007 DVD-Copy on the fly 17:41:17 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:41:19 #2 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:41:19 #3 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 17:41:19 #4 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1019344 NWA -1 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 17:41:19 #5 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 1019344 = 1019344, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 17:41:20 #6 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 17:41:20 #7 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1019343 (226:31.18, 1990MB) 17:41:20 #8 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 17:41:20 #9 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: LITE-ON DVDRW LH-20A1P, Media type: DVD-R Disc Manufacturer: TTH01 - Disc Application Code: 64, Disc Physical Code: 193 17:41:20 #10 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 17:41:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1019344 (1019344) = #1019344/226:31.19 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1019344 blocks [E: LITE-ON DVDRW LH-20A1P] -------------------------------------------------------------- 17:41:20 #12 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW LH-20A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2087616512, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1019344 | 1019344 | 0x00 1019344 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 17:41:20 #13 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 17:41:20 #14 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-No, small files-No (<64KB) 17:41:20 #15 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 2x (2,770 KB/s) 17:41:21 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 17:41:21 #17 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 17:41:21 #18 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 17:41:21 #19 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: - Revision number of minimum recording speed: - Revision number table of recording speed: - - - - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 17:41:21 #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 70192000 17:41:54 #21 Text 0 File Cdrdrv.cpp, Line 1352 17:41:54.562 - E: LITE-ON DVDRW LH-20A1P : Queue again later 17:44:43 #22 SPTI -1128 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 01 28 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 11 Buffer x07e33980: Len x10000 17:44:43 #23 TRANSFER -25 File Reader.cpp, Line 270 Error reading data 17:44:43 #24 Text 0 File Reader.cpp, Line 273 Exception value: -1128 17:44:43 #25 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 75808 17:51:04 #26 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 41951 (A3DFh) 17:51:07 #27 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 2x (2,770 KB/s) 17:51:09 #28 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:52:09 #29 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 17:52:09 #30 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 17:52:10 #31 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 17:52:12 #32 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 17:52:12 #33 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) PLEASE HELP!!!!
Hi 140205 Turn off DVD-copy on the fly. The error you getting is because somethings up with the source disc you are trying to copy from. Copy on the fly does ripping & burning in real time so any little glitch in the reading and bam fails and you have a coaster. Check the back of the disc also for any dirt, scratches or smudges and try cleaning it off w/ something non abrasive in a non circular motion. Try using the LiteOn to read and burn it. It may do a better job then the DVD-Rom drive. Take the burn speed up to 4x or 8x - 2x is a bit to slow.
