Olen päivittänyt firmwaren ja kokeillut eri nopeuksia ja eri poltto ohjelmia ja kokeillut varmuuskopioida eri levyjä, mutta aina suurin piirtein 30% kohdalla tulee Burn Process Failed tjsp. Asema on toiminut ennen moitteettomasti (oon myös kokeillu system restorea) Tässä neron virhe Logi: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 18:35:34 Nero version: 6.6.0.3 (Nero Express) Recorder: <AOPEN DUW1608/ARR> Version: A080 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <AOPEN DUW1608/ARR >Version: A080 - HA 1 TA 0 - 6.6.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4R080L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 0 DMA: On CdRomPeripheral : ATAPI CDROM 1.0 d346prt Port 2 ID 0 DMA: Off CdRomPeripheral : ATAPI CDROM 1.0 d346prt Port 2 ID 1 DMA: Off CdRomPeripheral : ATAPI CDROM 1.0 d346prt Port 2 ID 2 DMA: Off === CDRom-Device-Map === AOPEN DUW1608/ARR E: CDRom0 ATAPI CDROM F: CDRom1 ATAPI CDROM G: CDRom2 ATAPI CDROM I: CDRom3 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 180MB (185328kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.7.2005 Audio CD 8:57:23 #1 CDADOC -1 File Cdadoc.cpp, Line 1465 Audio item log info: Audio document burn settings: ============================= Burn mode: DAO, CD Text: On, Cache disk or network files: No, Cache small files: No, Cache files smaller than 65536 bytes. Audio Multisession: No List of audio tracks: ===================== Track 01: Length: 05:34.60, Pause frames: 150, Filters: 0, Name: '1 - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx. Track 02: Length: 05:09.04, Pause frames: 150, Filters: 0, Name: '2 - xxxxxxxxxxxxxxxxxxxxxx. Track 03: Length: 04:39.73, Pause frames: 150, Filters: 0, Name: '3 - xxxxxxxxxxxx'. Track 04: Length: 05:22.04, Pause frames: 150, Filters: 0, Name: '4 - xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'. Track 05: Length: 04:57.02, Pause frames: 150, Filters: 0, Name: '5 - xxxxxxxxxxxxx Track 06: Length: 04:46.69, Pause frames: 150, Filters: 0, Name: '6 - xxxxxxxxxxxxxx. Track 07: Length: 05:52.01, Pause frames: 150, Filters: 0, Name: '7 - xxxxxxxxxxxxxxxxxxxxxx. Track 08: Length: 05:17.74, Pause frames: 150, Filters: 0, Name: '8 - xxxxxxxxxxxxxxxxxxxxx'. Total size: 41:55.62 8:57:23 #2 Text 0 File Burncd.cpp, Line 2866 AOPEN DUW1608/ARR Buffer underrun protection activated 8:57:23 #3 Text 0 File Reader.cpp, Line 127 Reader running 8:57:23 #4 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:57:23 #5 Text 0 File Writer.cpp, Line 122 Writer AOPEN DUW1608/ARR running 8:57:23 #6 Text 0 File Burncd.cpp, Line 3151 Turn on Disc-at-once, using CD-R/RW media 8:57:24 #7 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 188536 ( 41:55.61) 8:57:24 #8 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 8:57:24 #9 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: AOPEN DUW1608/ARR; CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation ATIP Data: Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 8:57:24 #10 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:57:24 #11 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_AUDIO_NOPRE (1 - xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 25110 (25110) = #25110/5:34.60 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 25110 blocks [AOPEN DUW1608/ARR] 1: TRM_AUDIO_NOPRE (2 - Ixxxxxxxxxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 23179 (23179) = #23179/5:9.4 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 23179 blocks [AOPEN DUW1608/ARR] 2: TRM_AUDIO_NOPRE (3 - xxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 20998 (20998) = #20998/4:39.73 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 20998 blocks [AOPEN DUW1608/ARR] 3: TRM_AUDIO_NOPRE (xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 24154 (24154) = #24154/5:22.4 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 24154 blocks [AOPEN DUW1608/ARR] 4: TRM_AUDIO_NOPRE (xxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 22277 (22277) = #22277/4:57.2 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 22277 blocks [AOPEN DUW1608/ARR] 5: TRM_AUDIO_NOPRE (xxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 21519 (21519) = #21519/4:46.69 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 21519 blocks [AOPEN DUW1608/ARR] 6: TRM_AUDIO_NOPRE (7 xxxxxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 26401 (26401) = #26401/5:52.1 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 26401 blocks [AOPEN DUW1608/ARR] 7: TRM_AUDIO_NOPRE (8 - xxxxxxxxxxxxxxxxxxxx) 2 indices, index0 (150) not provided original disc pos #0 + 23849 (23849) = #23849/5:17.74 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_AUDIO_ULTRARAW96, 2448, config 0, wanted index0 0 blocks, length 23849 blocks [AOPEN DUW1608/ARR] -------------------------------------------------------------- 8:57:24 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040 Prepare recorder [AOPEN DUW1608/ARR] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 8: 1: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 0 367200 61836480, ISRC "" 2: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 61836480 62203680 118945872, ISRC "" 3: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 118945872 119313072 170716176, ISRC "" 4: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 170716176 171083376 230212368, ISRC "" 5: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 230212368 230579568 285113664, ISRC "" 6: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 285113664 285480864 338159376, ISRC "" 7: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 338159376 338526576 403156224, ISRC "" 8: TRM_AUDIO_ULTRARAW96, 2448/0x00, FilePos 403156224 403523424 461905776, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x01 | 0x00 -150 | 1 | 0 | 0x21 | 0x00 0 | 1 | 1 | 0x21 | 0x00 25110 | 2 | 0 | 0x21 | 0x00 25260 | 2 | 1 | 0x21 | 0x00 48439 | 3 | 0 | 0x21 | 0x00 48589 | 3 | 1 | 0x21 | 0x00 69587 | 4 | 0 | 0x21 | 0x00 69737 | 4 | 1 | 0x21 | 0x00 93891 | 5 | 0 | 0x21 | 0x00 94041 | 5 | 1 | 0x21 | 0x00 116318 | 6 | 0 | 0x21 | 0x00 116468 | 6 | 1 | 0x21 | 0x00 137987 | 7 | 0 | 0x21 | 0x00 138137 | 7 | 1 | 0x21 | 0x00 164538 | 8 | 0 | 0x21 | 0x00 164688 | 8 | 1 | 0x21 | 0x00 188537 | lead-out | 1 | 0x01 | 0x00 8:57:24 #13 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 48x (7 200 KB/s) 8:57:24 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:57:24 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #25260 8:57:24 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 2 (relocatable, no disc pos, no patch infos, orig at #0): write at #48589 8:57:24 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 3 (relocatable, no disc pos, no patch infos, orig at #0): write at #69737 8:57:24 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 4 (relocatable, no disc pos, no patch infos, orig at #0): write at #94041 8:57:24 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 5 (relocatable, no disc pos, no patch infos, orig at #0): write at #116468 8:57:24 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 6 (relocatable, no disc pos, no patch infos, orig at #0): write at #138137 8:57:24 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2596 Verifying disc position of item 7 (relocatable, no disc pos, no patch infos, orig at #0): write at #164688 8:57:24 #22 Text 0 File Mmc.cpp, Line 16283 StartDAO : CD-Text - On 8:57:24 #23 Text 0 File Mmc.cpp, Line 21025 Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON 8:58:42 #24 SCSI -1135 File Cdrdrv.cpp, Line 1430 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0AA30000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x01 0x51 0x1B 0x00 0x00 0x1A 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x0C 0x00 8:58:42 #25 CDR -1135 File Writer.cpp, Line 311 Write error 8:58:47 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:58:48 #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:58:52 #28 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 48x (7 200 KB/s) 8:58:52 #29 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:58:52 #30 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\atapi.sys': Ver=?.?.?.?, size=95360 bytes, created 4.8.2004 8:59:42 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Millä ohjelmalla voin tehdä mp3:sista imagen? Kokeilin nyt myös polttaa data-cd:n ja sekin epäonnistui...
Nyt kokeilin pienintä nopeutta (8x) ja toimi. Mistäköhän sitten mahtaa johtua että poltto epäonnistuu suuremmilla nopeuksilla 24x, 32x ja 48x ? Iso kiitos agentille avusta!
Jotkin levyt eivät toimi joko ollenkaan kovilla polttonopeuksilla vaikka paketin kyljessä niin luvataan tai eivät toimi tiettyjen asemien kanssa niin nopeasti, muutenkin kannattaa suosia hitaampia nopeuksia, tulee parempaa jälkeä ja asemakin kestää hiukan pidempään.
oon samoilla linjoilla sun kaa mutta sen takia ihmettelen kun aikasemmin poltin näitä samoja levyjä 32x ja 24x nopeuksilla, nyt epäilin että onko asema hajoamassa vai mitä ihmettä
Ovatko levyt varmasti samasta erästä? Vaikka levyt ovat samalta valmistajalta ja ulkoisesti kohtuu identtisiltä näyttävät voi itse levyt olla todella erilaista materiaalia (tai ovat toisenlaisella pinnoitteella). Voihan se myös olla että asema ei ole enään yhtä tarkka polttamaan kuin uutena jolloin virheitä myös tulee.
Myös päivitin firmwaren, ja on toiminut ihan normaalisti myös tämä oma AOPEN polttava dvd-asema..Dvd:itä kyllä oon poltellu runsaasti ilman ongelmia, mutta kun oon nyt kokeillu cd-r:iä polttaa pitkästä aikaa ja eri merkkisillä cd:illä, niin 4 kertaa putkeen on se homma kussu..Eri nopeuksilla oon testaillu, lähinnä hitaammilla eri nopeuksilla, mutta ei auta..Nero vaan jämähtää aina! Kun sitten vilasin levyä tunnin odotuksen jälkeen(livenä en koneelta), olihan siihen alkuun joku puolen millin raita tullu..Puol vuotta vanaha asema, et ei pitäs olla risa, tai mistäs näistä ikinä tietää..Jos joku tietää lisää konsteja, niin kiitos niistä!!
voi olla hyvinki virhe polttavas... mullakin oli joskus sama ongelma polttavas vein takaisin takuuta vastaan ja sain uuden ja siihen loppui virheet polton suhteen!