Vector Linux + Nvidia

Discussion in 'Linux -keskustelu' started by Punaparta, Nov 13, 2005.

  1. Punaparta

    Punaparta Regular member

    Joined:
    Dec 17, 2004
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    26
    Yritin tossa asennella nvidian ajureita tähän vector linuxiin
    ja kyllähän ne sinne meni mutta resoluution maksimi onkin
    sitten 640x480...

    Yritin googlailla ja tapella useamman tunnin mutta eipä
    ollut paljon edistystä.
    Asensin siis ihan normaalisti ne ajurit ja X käynnistyykin
    mutta resoksi ei anna kun ton 640 tai 320

    Käytössä siis Vector linux 5.01 korttina gf6800le
    ja xorg. Ajureina uusimmat Nvidia viralliset linux ajurit.
    Lisää infoa pyydettäessä annan toki. En vielä arvannut laittaa
    tota xorgin conffi filua jos tämä nyt olisi vaikka joku ihan simppeli säätöhomma.
     
  2. Carl0s-

    Carl0s- Regular member

    Joined:
    Mar 23, 2005
    Messages:
    178
    Likes Received:
    0
    Trophy Points:
    26
    no siis, sun pitää editoida sitä xorg.confia, ja laittaa sinne värisyvyys, ja sen alle minkä reson haluat, quotessa pätkä omastani:


    Kuten huomaat, "24" on värisyvyys, ja "modes" jälkeen määritellään mitkä kaikki resot ovat käytettävissä kyseisellä värisyvyydellä. Tuonne sitten manuaalisesti editoit haluamasi resot, tallennat ja reboottaat X:n
     
    Last edited: Nov 13, 2005
  3. Punaparta

    Punaparta Regular member

    Joined:
    Dec 17, 2004
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    26
    Niin eli kuten nvidian ohjeissa selvästi sanotaa.
    xorg.conffia pitää muokata ja tämän olin jo tehnyt.
    mutta tässä nyt kuitenkin xorg conffini.
    Jos jollain paistaisi joku vika silmään.



    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"
    RgbPath "/usr/X11R6/lib/X11/rgb"
    ModulePath "/usr/X11R6/lib/modules"
    FontPath "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
    FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath "/usr/X11R6/lib/X11/fonts/CID/"
    FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
    EndSection

    Section "Module"
    Load "record"
    Load "extmod"
    Load "dbe"
    #Load "dri"
    Load "glx"
    Load "xtrap"
    Load "freetype"
    Load "type1"
    Load "speedo"
    EndSection

    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd" ## KEYBOARD_DRIVER
    Option "CoreKeyboard"
    Option "XkbModel" "pc105" ## KEYBOARD_MODEL
    Option "XkbLayout" "fi" ## KEYBOARD_LAYOUT
    Option "XkbVariant" "nodeadkeys" ## KEYBOARD_VARIANT
    # Option "XkbOptions" "" ## KEYBOARD_OPTIONS
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Device" "/dev/mouse"

    # On platforms where PnP mouse detection is supported the following
    # protocol setting can be used when using auto.
    # Otherwise set it manually to:
    # Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
    # Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
    # MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
    # ThinkingMouse ThinkingMousePS/2 Xqueue
    Option "Protocol" "IMPS/2" ## MOUSE_PROTOCOL

    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"

    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons" ## MOUSE_E3BUTTONS
    # Option "Emulate3Timeout" "50"

    # Settings for newer IMPS/2 mouse (with wheel)
    Option "ZAxisMapping" "4 5" ## MOUSE_ZAXISMAPPING
    Option "Buttons" "5" ## MOUSE_BUTTONS
    Option "SendCoreEvents" ## MOUSE_SENDCOREEVENTS

    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor" ## MONITOR_VENDOR
    ModelName "Monitor Model" ## MONITOR_MODEL
    Option "DPMS"
    # HorizSync ## MONITOR_HSYNCH
    # VertRefresh ## MONITOR_VREFRESH
    EndSection

    Section "Device"
    Identifier "Card0"
    Driver "nvidia"

    Option "NvAGP" "3"
    Option "DigitalVibrance" "0"
    Option "TransparentIndex" "0"
    Option "CursorShadowAlpha" "64"
    Option "CursorShadowXOffse" "4"
    Option "CursorShadowYOffset" "2"



    BoardName "Unknown Board" ## DEVICE_BOARD


    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24 ## SCREEN_DEPTH
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1152x864" "1024x768" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 4
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 8
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 15
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 24
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    SubSection "Display"
    Depth 32
    Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" ## SCREEN_MODES
    EndSubSection
    EndSection
     
  4. juyli

    juyli Active member

    Joined:
    May 13, 2005
    Messages:
    1,861
    Likes Received:
    1
    Trophy Points:
    68
    Pistäpä nuo arvot kohdilleen näytön manuaalin mukaan
    tai jotkin muuten soveltuvat.
     

Share This Page