I have been getting this error when burning...it is ruining several discs...any ideas? Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero API version: 6.6.1.15 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 1, 15 Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL03 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 3 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 3 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8162B D: CDRom1 LITE-ON DVDRW LH-18A1P E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047276kB) Free physical memory: 624MB (639304kB) Memory in use : 38 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.8.2007 NeroAPI 2:43:41 PM #1 Phase 112 File APIProgress.cpp, Line 275 DVD-Video files reallocation started 2:43:41 PM #2 Phase 114 File APIProgress.cpp, Line 275 DVD-Video files reallocation completed (no file modified) 2:43:41 PM #3 Phase 111 File APIProgress.cpp, Line 275 DVD-Video files sorted 2:43:41 PM #4 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 2:43:41 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 2:43:41 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:43:41 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 2:43:41 PM #8 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 2:43:41 PM #9 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2089135 (464:15.10, 4080MB) 2:43:41 PM #10 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO 2:43:41 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 2:43:41 PM #12 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:43:41 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2089136 (2089136) = #2089136/464:15.11 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2089136 blocks [LITE-ON DVDRW LH-18A1P ] -------------------------------------------------------------- 2:43:41 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [LITE-ON DVDRW LH-18A1P] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4278550528, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2089136 | lead-out | 1 | 0x41 | 0x00 2:43:41 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 2:43:41 PM #16 Phase 24 File APIProgress.cpp, Line 275 Caching of files started 2:43:41 PM #17 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 2:43:41 PM #18 Phase 25 File APIProgress.cpp, Line 275 Caching of files completed 2:43:41 PM #19 Phase 36 File APIProgress.cpp, Line 275 Burn process started at 16x (22,160 KB/s) 2:43:41 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:43:41 PM #21 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode 2:43:41 PM #22 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: Yes 2:43:41 PM #23 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 2:44:18 PM #24 Text 0 File Cdrdrv.cpp, Line 1224 14:44:18.015 - E: LITE-ON DVDRW LH-18A1P : Queue again later 2:46:36 PM #25 SPTI -1135 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 41 E0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x24148400: Len x10000 0x00 00 01 BA 44 05 8F 7C 4C 79 01 89 C3 F8 00 00 0x01 BD 07 EC 81 80 05 21 01 65 22 53 80 01 06 24 0x54 FD 2B 9B 0F 6B D1 AF 45 FE EF 6D D3 54 FA 22 2:46:36 PM #26 CDR -1135 File Writer.cpp, Line 281 Write error E: LITE-ON DVDRW LH-18A1P 2:46:36 PM #27 Text 0 File DVDR.cpp, Line 3246 EndDAO: Last written address was 16863 2:46:36 PM #28 Phase 38 File APIProgress.cpp, Line 275 Burn process failed at 16x (22,160 KB/s) 2:46:36 PM #29 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 2:46:36 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. 2:46:36 PM #31 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 2:46:38 PM #32 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 2:46:38 PM #33 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Recorder: Version: GL03 there are several firmware updates for your burner look here Burn process started at 16x (22,160 KB/s) also try lowering your burn speed maybe try 8x or 12x or 4x, after the firmware update you might be able to burn at 16x, if you do try it at 16x and get a successful burn you should run a nero cd/dvd speed disc quality to see if the media burns good at that speed. check out these threads http://forums.afterdawn.com/thread_view.cfm/540688 http://forums.afterdawn.com/thread_view.cfm/415515 i believe cincyRob and greensman have the same burner you do, and have experience with the firmware updates.
