I am new to the dvd burning thing and I bought a I/O magic External DVD burner w/lightscribe and I use DVD decrypter then DVD shrink asnd Nero that came with the burner and I am only able to burn on RW DVD's even though it supposively supports all formats. What am I missing here???? Any help would be greatly appreciated. Thanks!
Hi stockgt Could be the discs you are using aren't compatible w/ the drive - not all are for all drives. So what media are you using? Goods one to use are Verbatim, Taiyo Yuden and made in Japan Sony, Fuji or Maxell. What's the model number of the burner? If there's a firmware update available that might help. Are you getting a burn error or does the drive just not recognize the discs?
I can burn on maxell dvd rw. I tried memorex dvd+r and HP dvd+r dl and they will not work. I get a box that says burn failed. My niece tried and got an error that said something about compilated are full or something like that. Its a I/O magic model IDVD16DLSE
1A20-8203-0139-2394-4252-0541* Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.14 Using interface version: 6.6.0.9 Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\ Application: Ahead\Nero Recode Internal Version: 6, 6, 0, 14d Recorder: <ATAPI DVD LS 8X16X8X16> Version: GCAB - HA 2 TA 0 - 6.6.0.14 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00JJA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : ATAPI CD-RW 52X32X atapi Port 1 ID 0 DMA: On DiskPeripheral : MITBISHI LS-120 COSM 05 atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === ATAPI CD-RW 52X32X D: CDRom0 ATAPI DVD LS 8X16X8X16 E: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 958MB (981424kB) Free physical memory: 534MB (547260kB) Memory in use : 44 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.9.2007 NeroAPI 11:48:27 AM #1 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 11:48:27 AM #2 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO 11:48:27 AM #3 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: ATAPI DVD LS 8X16X8X16, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:48:27 AM #4 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:48:29 AM #5 Text 0 File DVDR.cpp, Line 2324 Recording mode: Sequential Recording Mode for Multisession 11:48:29 AM #6 Text 0 File Mmc.cpp, Line 21608 Set BUFE: Seamless Link -> ON 11:48:29 AM #7 Text 0 File DVDR.cpp, Line 2478 Start write address at LBA 0 DVD high compatibility mode: No 11:48:29 AM #8 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:48:29 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005 Estimated filesystem size: 560 11:48:29 AM #10 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 4x (5,540 KB/s) 11:48:32 AM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 0. Length: 608 11:48:32 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 1869 Reserved start fragment at 0 11:48:32 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 675 Reserved fragment at 608. Length: 64 11:48:32 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 1401 Writing VTS_01_1.VOB at sector 672 11:49:50 AM #15 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x17348200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x56 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 11:49:50 AM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 2174 Failed to write 80 sectors at 21968 11:49:50 AM #17 Phase 179 File APIProgress.cpp, Line 276 Writing file to disc failed 11:49:50 AM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 3629 Disc info: Partitions: 2 #0: Start: 0, Size: 592 #1: Start: 608, Size: 48 11:49:50 AM #19 SCSI -1064 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x17348200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x56 0x00 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x21 0x02 11:49:54 AM #20 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM File 'Drivers\InCDfs.SYS': Ver=?.?.?.?, size=86496 bytes, created 6/30/2003 6:51:00 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4.00, size=28208 bytes, created 6/30/2003 6:51:24 AM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 0, 1, 8, size=5264 bytes, created 6/30/2003 6:56:20 AM (InCD4 driver for win NT/2K/XP) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I can't find much on this drive for firmware support from io magic. It probably needs a update to handle some the 16x media like the ones you are using. Looks like this is an oem BenQ so you could try crossflashing to BenQ firmware. Update package 1 of Nero to the latest version of 6 - 6.6.1.15 Uninstall InCD also & run the clean tool- it's been known to cause conflicts cause conflicts.
