Hi , I must have tried twice in the past I found two different Windows Vista Image files on the web, about 2.5 Gigabytes. I wanted to burn them with Nero (my version = 7.5.7.0, but both failed to complete succesfully. Both failed at the same point. There must be something I am doing wrong. I get error message "Could not perform end of Disc-at-Once" I used "Burn Image" in Nero and selected the Dvd image. I used AFA 8x speed DVD-r Please assist thanks Ralph Here is the log : honsbeek edited by ddp Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-11-02 오후 1:54:32 NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 1 TA 0 - 7.5.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 1 TA 2 - 7.5.7.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3300831AS atapi Port 1 ID 0 DMA: On DiskPeripheral : ST3120022A 8.54 iteatapi Port 4 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 st3shark Port 5 ID 0 DMA: Off === CDRom-Device-Map === Generic DVD-ROM X: CDRom2 HL-DT-ST DVDRAM GSA-4163B Y: CDRom0 HL-DT-ST RW/DVD GCC-4521B Z: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1047724kB) Free physical memory: 421MB (431152kB) Memory in use : 58 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.2.2007 Burn DVD Image 오후 6:12:44 #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 오후 6:12:45 #2 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 오후 6:12:45 #3 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1261425 (280:19.00, 2463MB) 오후 6:12:45 #4 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO (enabled: CD) 오후 6:12:45 #5 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 오후 6:12:45 #6 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 오후 6:12:45 #7 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1261426 (1261426) = #1261426/280:19.1 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1261276 blocks [Main] -------------------------------------------------------------- 오후 6:12:45 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2583400448, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1261426 | 1261276 | 0x00 0 | 1 | 1 | 0x41 | 1261426 | 1261276 | 0x00 1261426 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 오후 6:12:49 #9 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 오후 6:12:49 #10 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 오후 6:12:49 #11 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 오후 6:12:49 #12 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 오후 6:12:49 #13 Phase 32 File dlgbrnst.cpp, Line 1746 Simulation started at 8x (11,080 KB/s) 오후 6:12:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 오후 6:12:49 #15 Text 0 File DVDR.cpp, Line 3026 Recording mode: Sequential Recording Mode for Multisession 오후 6:12:49 #16 Text 0 File DVDR.cpp, Line 3182 Start write address at LBA 0 DVD high compatibility mode: Yes 오후 6:12:49 #17 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 오후 6:15:17 #18 SPTI -1039 File SCSIPassThrough.cpp, Line 293 Y: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1039) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x2A 00 00 08 DC 40 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 10 32 34 00 0C 09 01 Buffer x0607da00: Len x10000 0x00 EB 8E AE BA AA AB 64 E9 59 39 09 44 24 04 25 0x09 39 0A 85 56 70 A6 DC C9 DC C3 54 C2 67 6F C7 0xD1 6F 1B F7 22 6C 4A 9E 28 DE E6 FC 79 87 77 D8 오후 6:15:17 #19 CDR -1039 File Writer.cpp, Line 278 Focus or tracking error Y: HL-DT-ST DVDRAM GSA-4163B 오후 6:15:17 #20 Text 0 File DVDR.cpp, Line 3402 EndDAO: Last written address was 580671 오후 6:15:17 #21 Phase 133 File dlgbrnst.cpp, Line 1746 Writing short lead-out 오후 6:15:18 #22 SPTI -1176 File SCSIPassThrough.cpp, Line 293 Y: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 10 5B 01 00 0C 72 04 오후 6:15:18 #23 CDR -1039 File WriterStatus.cpp, Line 161 Focus or tracking error Y: HL-DT-ST DVDRAM GSA-4163B 오후 6:15:18 #24 TRANSFER -24 File WriterStatus.cpp, Line 161 Could not perform end of Disc-at-once 오후 6:15:19 #25 Phase 34 File dlgbrnst.cpp, Line 1746 Simulation failed at 8x (11,080 KB/s) 오후 6:15:19 #26 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 오후 6:15:19 #27 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\scsiport.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=90240 bytes, created 2002-08-29 오전 1:27:50 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi. Click the paper/pencil icon in the upper right of your post and edit out your Nero serial number beginning 1C... near the beginning of your Nero log. This is never a good error to see pop up. It can be caused by poor quality media, power problems, and faulty hardware. Your burner firmware needs updating. You have version 1.03. Version 1.06 is the latest available. Here's the link to download version 1.06: http://lgodd.lge.com/fwdrv/DVD-WRITER/GSA4163A106.exe The region free version is here: http://tdb.rpc1.org/#GSA4163B Your disks are actually made by CMC Magnetics a low cost low quality supplier. Try some good quality media like Verbatim, Taiyo Yuden, and made in Japan labeled Fuji and Sony and see if that resolves the error. You can also try using ImgBurn. It's free. http://www.imgburn.com
Case: Discussion about pirated content and piracy, such as converting (downloaded) video and/or audio files to DVD/AudioCD/whatever format. PERMITTED Case: Discussion about copy protection circumvention in general (extracting encrypted content, such as DVD movies, compact discs, copy protected console and computer software, using existing software). PERMITTED
Laddyboy you are too kind, Please tell me again how I can flash my DVD combo LG You mentioned a lot of good things , all from that log right? Pretty impressive. Actually , I am not interested in pirated materials , I just wanted to know why my DVD drive failed to work on certain instances, that's all. I am not a Pirate !!! ^^
Here is a log from Imgburn : Same problem I would presume : I 21:20:09 ImgBurn Version 2.1.0.0 started! I 21:20:09 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:20:09 Initialising SPTI... I 21:20:09 Searching for SCSI / ATAPI devices... I 21:20:09 Found 1 DVD-ROM, 1 DVD-ROM/CD-RW and 1 DVD켙W/RAM! I 21:21:03 Operation Started! I 21:21:03 Source File: -==/\/[DISCOVERY IMAGE]\/\==- I 21:21:03 Source File Sectors: 2,297,888 (MODE1/2048) I 21:21:03 Source File Size: 4,706,074,624 bytes I 21:21:03 Source File Volume Identifier: DISCOVERY_IMAGE I 21:21:04 Source File File System(s): None I 21:21:04 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4163B A106 (J (ATA) I 21:21:04 Destination Media Type: DVD-R (Disc ID: CMC MAG. AE1) (Speeds: 4x, 8x) I 21:21:04 Destination Media Sectors: 2,297,888 I 21:21:04 Write Mode: DVD I 21:21:04 Write Type: DAO I 21:21:04 Write Speed: MAX I 21:21:04 Link Size: Auto I 21:21:04 Test Mode: No I 21:21:04 BURN-Proof: Enabled I 21:21:04 Filling Buffer... I 21:21:04 Writing LeadIn... I 21:21:36 Writing Image... W 21:23:58 Failed to Write Sectors 606144 - 606175 - Tracking Servo Failure W 21:23:58 Retrying (1 of 20)... W 21:23:58 Retry Failed - Tracking Servo Failure W 21:23:58 Retrying (2 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (3 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (4 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (5 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (6 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (7 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (8 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (9 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (10 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (11 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (12 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (13 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (14 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (15 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (16 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (17 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (18 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (19 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (20 of 20)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format W 21:23:58 Retrying (21)... W 21:23:58 Retry Failed - Cannot Write Medium - Incompatible Format E 21:24:01 Failed to Write Sectors 606144 - 606175 - Tracking Servo Failure I 21:24:01 Synchronising Cache... E 21:24:02 Failed to Write Image! E 21:24:02 Operation Failed! - Duration: 00:02:58 I 21:24:02 Average Write Rate: 8,418 KB/s (6.1x) - Maximum Write Rate: 11,132 KB/s (8.0x)
Hi. The "edit" button/icon is at the far right of the orange/brown stripe that contains the date and time of your post. To flash the firmware, click on the link to download it to your computer. It'll be an executable file so just open it. It should find your burner automatically and than ask permission to flash the new firmware.
