I hope someone can give me a few ideas with this log. Yes the DMA active! [/color][/color][/b] 1a20-*serial number removed by creaky* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/12/2003 5:18:04 AM Nero version: 6.3.0.2 (Nero Express) Recorder: <_NEC DVD+-RW ND-6650A> Version: 102C - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 102C - HA 1 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : FUJITSU MHV2060BH atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6650A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1014MB (1038712kB) Free physical memory: 255MB (261736kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Static Write Speed Table: 1 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 21.3.2008 Burn DVD Image 8:31:05 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 8:31:05 PM #2 Text 0 File Writer.cpp, Line 124 Writer _NEC DVD+-RW ND-6650A running 8:31:05 PM #3 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 8:31:05 PM #4 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2285997 (507:59.72, 4464MB) 8:31:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 8:31:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 8:31:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:31:05 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2285998 (2285998) = #2285998/507:59.73 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285998 blocks [_NEC DVD+-RW ND-6650A] -------------------------------------------------------------- 8:31:06 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [_NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681723904, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2285998 | lead-out | 1 | 0x00 | 0x41 8:31:06 PM #10 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 8:31:06 PM #11 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 8:31:06 PM #12 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 8:31:06 PM #13 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 8x (11,040 KB/s) 8:31:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:31:06 PM #15 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:10,232 (850232ms) -> OK 8:31:06 PM #16 Text 0 File DVDR.cpp, Line 1512 Recording mode: Sequential Recording Mode 8:31:06 PM #17 Text 0 File Mmc.cpp, Line 19451 Set BUFE: JustLink -> ON 8:31:06 PM #18 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: No 8:31:06 PM #19 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 02 FE 10 00 02 FF A0 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:31:09 PM #20 Text 0 File Cdrdrv.cpp, Line 1277 20:31:09.796 - _NEC DVD+-RW ND-6650A\H1 T0 : Queue again later 8:44:04 PM #21 SCSI -1135 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05110000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x1F 0x0A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 8:44:04 PM #22 CDR -1135 File Writer.cpp, Line 301 Write error 8:44:04 PM #23 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 8:44:05 PM #24 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 8:44:05 PM #25 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was 2034367 8:44:05 PM #26 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 8:44:05 PM #27 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 8:44:05 PM #28 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 8x (11,040 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 5:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/10/2006 1:42:42 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/02/2007 8:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 1:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Try freeing up some memory by shutting down some of the programs running in the background. This needs to be removed. Try burning at 4X.
Update your Nero from here, BOTH packages Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe Update firmware from here (if using a Dell comp) http://forum.rpc1.org/dl_firmware.php?download_id=2114 Here's the zapper for Roxio (File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/10/2006 1:42:42 PM ) http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Thanks Gwendolin and Dialysis1. The firmware upgrade was not required but I will eventually get around to it. DVD burnt fine. Appreciate the help.
