x-ecuter 2.3 lite modchip Problems, Chip off it's ok, Chip on Red and Green lights flash

The chip is in the Xbox but when the Chip is turn on with switches the xbox turns on and off then i get a Red flashing light near the Cd rom Opener. When the chip is turned off the xbox works fine and boots up. As soon as the chip is turned and the xbox turned on the Xbox shuts it self off then reboots then a red light flashes. All the solder connections look good"Do" Conection. The two blue lights come on the x-ecuter 2.3 lite modchip. what could be the problem. Do i have a Bad chip?
I read on the net that if the dvd rom opens that mean s you have to reflash the Bios on the chip. But the Dvd-Rom DOESN"T OPEN. I just get a Blaning Red and green light.
Any ideas?????

 

did you ever get this figured out.. mine is doing the same..

 

dsaf

 

dsaf??

 

We emailed the company with this, we couldn't get it to work yet, it's pissing me off. Here is what my tech guy wrote up on my xbox.

Dialog
Question:

I have installed the LPC points over and over again, and all soulder jobs are clean. The D0 point is installed correctly.

When the xbox is powered up with the mod disabled, it boots fine.

When I enable the mod on either bank and power up the machine, I get a power on / power off / power on / power off / power on.. red green flashing lights. What many people are calling a power cycle.

Now, I am running this in a ver 1.5 xbox, and I understand that the cromwell bios is not compatable with that version of xbox. The DVD tray is NOT ejecting, and booting with a CD-RW with another bios is not working either.

It is my understanding that the D0 simply allows the bios to load, and if that wasnt sauldered correctly, then the xbox wouldnt boot at all. The LPC points feed the bios to the system.

Could a bad cromwell flash on either bank cause this, or is it a possibility that the chip is not responding correctly?

Any and all information would be extremely helpful

 

hey did you guys flash the bios.

 

My tech guy is not here, BUt
flash the bios no, we put a CD-RW in the drive with the Bios but it wouldn't read it. It just power on/ power off 3 times then nothing. That's when the chip is switched to enabled and on either bank.

 

The twice booting and the red green means no bios in any memory bank.

 

Ok, so what do i do. We put a CD-RW in the DVD-Rom but it won't pick it up at all. Any suggestions?

 

I dont have that chip, but this place explains how to do it. GOod luck

http://www.system-mods.com/cgi-bin/pd/kb.cgi?view=42&lang=en

 

That's for 2.2, i have 2.3. Do you think that the Bios need to be flashed? Is that the problem?

 

ok jdam your dvd drive in your xbox wont read the disk,i had this same problem.i pulled the one out of my computer and hook it up to the xbox.now get your bios you need to flash your bios.burn it to a cd-rw and put in drive.if i remember its a two step process.its been awhile for me.ok im not sure what board you have.but mine is the v1.0.so i have two cds one with oxflash on it and the other with the bios(4977).now when you put the first cd in let it do its thing.then it will eject put the other disk in but DO NOT close the tray it will do it by its self.you should see alot of linux commands.after you flash the bios reboot,if you dont have slayer installed put the cd in and reboot.this should help you out.hope all goes good.

 

ok laser i jsut sent that info to my tech guy. I hope that works, when i started and shut off 3 times it would stop them the DVD-Rom butoon would flash red/green. and i would get a black screen. I'll pass that info to my tech guy. thanks, i really hope that works.

 

I have a 1.5 xbox

 

Good stuff, I didnt no that you flashed the bios from a cd. I always thought they had a programmer. Good to no, I hope you fix your problem.

 

2.3 xecuter. Do not flash wit wit 4977! Use 4979 or M7. I flashed mine with 4977 and it is HOSED! I still can't can't reprogram it. I am gonna try a hot flash.

 

Thanks for all the solutions and help guys. I'll let you know what happens, but thanks alot.

 

ok so wut do i do now i have the same problem it turns off and turns on and flashes red i need help

 

I am having the same problem w/ my 2.3 chip and all the lpcs are clean and d0 point correct as well and i still get the 3 reboots and red/green flashing...would switching my dvdrom from pc cure this problem... wat should i do?

 

no jason switching the drives is just so you can read the cd-rw disk.if you havent flashed your bios then you need too.since your dvd drive in your xbox wont read the disk you have to swap.before you flash make sure you pick the right bios for your xbox.