xbox turns on and off 3 times help

Discussion in 'Xbox - Hardware mods' started by jjcf89, Mar 6, 2006.

  1. jjcf89

    jjcf89 Member

    Joined:
    Mar 18, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    I have had a xecuter 2.6ce for a while now with an xbox v1.1. And occasionally the xbox with refuse to boot. It will turn on and off 3 times in a sequence then flash red. It helps most of the time to hit it on the side while in the second boot and then it will load up. I'm not quite sure what the cause is? Can someone help me with this?

    edit---
    when i shut the mod chip off the problem goes away and starts the standard dashboard. but when i switch it back on it errors again.
     
    Last edited: Mar 6, 2006
  2. brigzy29

    brigzy29 Member

    Joined:
    Feb 28, 2006
    Messages:
    11
    Likes Received:
    0
    Trophy Points:
    11
    hi mate there will be a dry solder joint some where on the chip, i suggest a re-solder is in order, that will sort the problem out, there nothing wrong with your xbox. cheers kev
     
  3. jjcf89

    jjcf89 Member

    Joined:
    Mar 18, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    what should i look for for this dry solder point. what does it look like?
     
  4. TheReturn

    TheReturn Guest

    Well just double check your solders, pin header. if you have solderless, then check the adapter. Something is loose.
     
  5. TheReturn

    TheReturn Guest

    Also check the D0 point.
     
  6. markop123

    markop123 Member

    Joined:
    Mar 17, 2006
    Messages:
    22
    Likes Received:
    0
    Trophy Points:
    11
    check for bad solder spots or bridges. if this isnt the problem maybe the bios on the chip is messed up, get a programmer and reprogram the chip.

    -Marko, 13
     
  7. knizzle

    knizzle Guest

    this happened to me on my softmodded xbox, and on my harmodded xbox, after just figgiting with it it seems to works after a while. If its a bad solder, you need to check how to re-solder it to the D0 point, go to you modchips website that you have, and they should have a tut no which D0 point to solder to
     
  8. jjcf89

    jjcf89 Member

    Joined:
    Mar 18, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    I am using a solderless Xapter adapter for my xecuter 2.3. I just last night took everything out wiped off the system board and checked for damaged parts. I also rewrote the chip with the cromwell bios to cover all my bases and verified it. It didn't change anything. I then used a different Xapter and still nothing. I really quite am quite confused by the cause of this. It seems i've covered every base. I'd like some thoughts on the issue.
     
    Last edited: Mar 20, 2006
  9. xXBMODSXx

    xXBMODSXx Guest

    what is the cheapest best chip out there?
     
  10. cearel

    cearel Guest

    if it turns off and on that means you didnt flash the bios right. @xXbmodsXx cheap isnt always good, i got my solderless xecuter3 ce for $78 including shipping and it was well worth it just what ever you do dont get a spider chip they suck and are not user friendly
     
  11. xXBMODSXx

    xXBMODSXx Guest

    @ cereal dude um well do i have to get a bigger hdd for the xecuter?

    will it allow me to back up games and play them instantly?
     
  12. cearel

    cearel Guest

    wow nice sig lol, no you dont need a bigger hdd unless you want to save games. when you get the chip you have to flash the bios then you can play burned games
     
  13. xXBMODSXx

    xXBMODSXx Guest

    all i need to do is plug it in?
     
  14. cearel

    cearel Guest

    what you would have to do is plug the chip in then a flash bios screen of some kind will come up then you flash it and you would be set to go
     
  15. jjcf89

    jjcf89 Member

    Joined:
    Mar 18, 2005
    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    11
    i did rewrite the bios and it looked like it took.
     

Share This Page