**DVDFab Decrypt, FixVTS, Shrink, ImgBurn Guide**

The problems have been with 3 different movies. I also just checked my firmware and confirmed it's the most up to date.

 

Looks like the FixVTS website is down so I fixed the link to download the program from afterdawn. Try again

 

dj928,

At what step in the process are you getting these errors exactly? Is it while you are using ImageBurn? So do you actually have an image of the movie on your hard drive now and just need to get it to a disk?

 

Yes, it's during the imgburn part - after I select the option to burn using imgburn from DVD shrink. Also I noticed that the verify box was checked on the imgburn page. I don't know if that box should be checked or not or what it does. And, I don't know if the errors occurred during the verify process or not. I just come back into the room while it is burning and see the error messages on the screen.

 

thanks bbmayo i will tr again thanks for all your ep i appreciate it and anyoneelse out there thank you too for you assistance

 

@dj928,

Ok try this. Instead of selecting to use ImgBurn during the backup process with Shrink [step 31] select "ISO image file" and save to your hard drive instead. Lets see if we can at least get your DVD on to your hard drive and go from there. As far as the verify being checked it does nothing more than verify your disk after it is burned, but I don't believe you are getting that far yet.

@j49er99,
No problem let us know if you need anything else.

 

OK, after trying a few more burns, I have more detailed information. The error message does occur during the verify process. If I uncheck the verify process, it gives the successful burn message. It is burning the movie to disc. I have slowed the burn speed to 3x and 2.4x. Doesn't make a difference. When I watch the movie, it freezes or hiccups every 5 or 10 minutes or so. I get the error message during verify every time. If there's a way to paste a .jpg image here, I can do so. I copied it.

Thanks.

 

this seems really involved, is this all really neccesary? cant i just rip the dvds img using img burn and then reburn it to a dual layer disc

 

You wouldn't be ripping the disk, instead you would be copying the files, as the encryption will still be there.

These steps are to rip, compress, and burn a dvd-9 disk to fit on a dvd-5 disk.

 

where can i find the steps to rip a dual layer dvd and burn to a dual layer dvd, i was told to use imgburn but thats the extent.

 

Dvdfab HD Decrypter is a free version that can rip either full disk or main movie only. You can follow the same steps, but output dvd shrink to. Dvd9.

 

do u not like nero or soemthing? cant i use that?

 

You can use nero if you want to. I don't use it, and prefer imgburn over it. I prefer freeware over payware, especially if the freeware is an excellent program.

 

K well, i ripped with dvdfab, ran it through fixvts and burned with dvd shrink, is that ok

 

Dvd shrink does not burn, it is a rudamentary ripper and transcoder. To burn, you need a program like imgburn or nero, which can be set to autoburn with dvd shrink.

 

ya i know, but i shouldnt use nero to burn it? make image file and burn with dvd decrypter?

 

You can burn with nero if you prefer. I use imgburn, my preference.


Imgburn is basically an updated dvd decrypter without the ripper.

 

any idea why i got that message?

 

Windows XP 6.0
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 3:54:32 PM

NT-SPTI used
Nero API version: 7.5.13.0
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 5, 13, 0

Recorder: <HL-DT-ST DVDRAM GSA-H44N>Version: RK00 - HA 1 TA 0 - 7.5.13.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?

=== Scsi-Device-Map ===

=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H44N E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1918MB (1964752kB)
Free physical memory: 944MB (967328kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.8.2009
NeroAPI
3:39:04 PM #1 Phase 112 File APIProgress.cpp, Line 282
DVD-Video files reallocation started

3:39:04 PM #2 Phase 114 File APIProgress.cpp, Line 282
DVD-Video files reallocation completed (no file modified)

3:39:04 PM #3 Phase 111 File APIProgress.cpp, Line 282
DVD-Video files sorted

3:39:04 PM #4 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

3:39:04 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 838
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

3:39:04 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

3:39:04 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

3:39:04 PM #8 Text 0 File Burncd.cpp, Line 3467
Turn on Disc-At-Once, using DVD media

3:39:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3664495 (814:19.70, 7157MB)

3:39:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO

3:39:05 PM #11 Text 0 File DlgWaitCD.cpp, Line 2929
Recorder: HL-DT-ST DVDRAM GSA-H44N, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: UMEDISC, Media Type ID: DL1, Product revision number: 64
Disc Application Code: 0, Extended Information Indicators: 3

3:39:05 PM #12 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

3:39:05 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 792
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3664496 (3664496) = #3664496/814:19.71
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3664496 blocks [E: HL-DT-ST DVDRAM GSA-H44N]
--------------------------------------------------------------

3:39:05 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVDRAM GSA-H44N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7504887808, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 3664496 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3664496 | 0 | 0x00
3664496 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

3:39:05 PM #15 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

3:39:05 PM #16 Phase 24 File APIProgress.cpp, Line 282
Caching of files started

3:39:05 PM #17 Text 0 File Burncd.cpp, Line 4351
Cache writing successful.

3:39:05 PM #18 Phase 25 File APIProgress.cpp, Line 282
Caching of files completed

3:39:05 PM #19 Phase 36 File APIProgress.cpp, Line 282
Burn process started at 2.4x (3,324 KB/s)

3:39:05 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2712
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

3:39:49 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A AD 21 00 3E 24 00 00 C0 00 07
Buffer x082663c0: Len x804

3:39:49 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 640
L0 Data Zone Capacity set to 1832256 (1BF540h, 3578MB) -> OK, confirmed setting

3:39:49 PM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 667
Burning Layer 1

3:39:49 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 677
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

3:39:49 PM #25 Text 0 File Cdrdrv.cpp, Line 9261
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 1EF53F h (LBN: 1BF53F h, 3578 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: UMEDISC.
Media type ID: DL1
Product revision number: 64
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 03 55 4D 45 44 49 - 53 43 00 44 4C 31 40 40 ...UMEDISC.DL1@@
25 25 37 10 00 22 6C 00 - 22 6C 20 1F 0C 0D 12 12 %%7.."l."l......
01 01 01 10 00 20 1F 0C - 0D 12 12 01 01 01 10 00 ................

3:39:49 PM #26 Text 0 File DVDR.cpp, Line 6324
Drive: HL-DT-ST DVDRAM GSA-H44N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

3:39:49 PM #27 CDR -1211 File DVDR.cpp, Line 6227
Book Type set to: DVD-ROM

3:39:49 PM #28 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes

3:58:47 PM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 1950
Burning Layer 2

3:58:47 PM #30 Text 0 File DVDPlusDualLayer.cpp, Line 1961
Perform layer 1 to 2 jump before writing at address 1832256 (1BF540h)

3:58:51 PM #31 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 00 00 1B FC A0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 35 00 04 3E 44 86
Buffer x1d480f80: Len x10000
0x00 00 01 BA 44 18 7D ED B6 03 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 BE D5 A1 95 B9 5D 09 4D D9
0xA8 58 30 FF FB 5E 12 D4 BD AC AD A0 53 64 39 BB

3:58:51 PM #32 CDR -1061 File Writer.cpp, Line 299
Internal target failure
E: HL-DT-ST DVDRAM GSA-H44N

3:58:51 PM #33 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 0A 35 00 04 3E 44 86

3:58:55 PM #34 CDR -1061 File WriterStatus.cpp, Line 162
Internal target failure
E: HL-DT-ST DVDRAM GSA-H44N

3:58:55 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once

3:58:55 PM #36 Phase 38 File APIProgress.cpp, Line 282
Burn process failed at 2.4x (3,324 KB/s)

3:58:55 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 863
DRM: DRM burn session terminated.

3:58:55 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 892
DRM: Closing entire DRM handling. Bye.

3:58:55 PM #39 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

3:59:09 PM #40 Text 0 File Cdrdrv.cpp, Line 10538
DriveLocker: UnLockVolume completed

3:59:09 PM #41 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=6.4.645.100 (NT.051018-1332), size=98408 bytes, created 11/2/2006 5:50:35 AM

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)