I used dvd shrink & copied to my hard drive & used Nero to burn. The source disc is not a copy. Jenlicris Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 5:06:00 AM ahead WinASPI: File 'G:\Program Files\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero API version: 6.6.0.16 Using interface version: 6.3.1.4 Installed in: G:\Program Files\Nero\ Application: ahead\Nero - Burning Rom Internal Version: 6, 6, 0, 16b Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0S - HA 1 TA 1 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVD SOHD-167T atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVD SOHD-167T D: CDRom0 LITE-ON DVDRW SOHW-1633S E: CDRom1 LITE-ON DVDRW LDW-851S F: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1046528kB) Free physical memory: 621MB (636592kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.9.2005 NeroAPI 10:54:14 AM #1 Phase 112 File APIProgress.cpp, Line 276 DVD-Video files reallocation started 10:54:14 AM #2 Phase 114 File APIProgress.cpp, Line 276 DVD-Video files reallocation completed (no file modified) 10:54:14 AM #3 Phase 111 File APIProgress.cpp, Line 276 DVD-Video files sorted 10:54:15 AM #4 Text 0 File Reader.cpp, Line 127 Reader running 10:54:15 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:54:15 AM #6 Text 0 File Writer.cpp, Line 122 Writer LITE-ON DVDRW SOHW-1633S running 10:54:15 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:15 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 10:54:15 AM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 10:54:15 AM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2242575 (498:21.00, 4380MB) 10:54:15 AM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO 10:54:15 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:54:15 AM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:54:15 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2242576 (2242576) = #2242576/498:21.1 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2242576 blocks [LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 10:54:15 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4592795648, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2242576 | lead-out | 1 | 0x41 | 0x00 10:54:15 AM #16 Phase 24 File APIProgress.cpp, Line 276 Caching of files started 10:54:16 AM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 10:54:16 AM #18 Phase 25 File APIProgress.cpp, Line 276 Caching of files completed 10:54:16 AM #19 Phase 36 File APIProgress.cpp, Line 276 Burn process started at 8x (11,080 KB/s) 10:54:16 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:54:16 AM #21 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 10:54:16 AM #22 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 10:54:16 AM #23 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 10:54:16 AM #24 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:54:44 AM #25 Text 0 File Cdrdrv.cpp, Line 1286 10:54:44.796 - LITE-ON DVDRW SOHW-1633S\H1 T1 : Queue again later 10:57:56 AM #26 SCSI -1046 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00C90000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x2A 0x00 0x00 0x00 0x0C 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x30 0x05 10:57:56 AM #27 CDR -1046 File Writer.cpp, Line 311 Illegal disc 10:57:56 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:57:56 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 10:57:56 AM #30 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 3167 10:57:56 AM #31 Phase 38 File APIProgress.cpp, Line 276 Burn process failed at 8x (11,080 KB/s) 10:57:56 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:57:56 AM #33 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 5:06:00 AM File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 3/19/2005 10:06:32 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Very odd,you can burn plus format,but not dash. Is there a reason why you have to use the dash format? Here's something you may want to do. Get rid of nero completely from your pc. Use the nero6 cleantool to rid all remnants of nero off your pc: http://ww2.nero.com/enu/Clean_Tools.html Re-install nero and make sure you leave out the INCD packet writing software. Another thing: Do you have any Roxio software on your pc?
I'm going to try the Nero clean tool. I need to use the dash format because I backup a lot of movies for my son & his player prefers the dash format. I have no Roxio on my computer. The only program I have besides Nero is Sonic record now which I don't have a problem with, it burns every format however, I prefer Nero. Will keep you posted. Jenlicris
@jenlicris - you're saying your son's player 'prefers' dash media. is that as in it prefers dash, or can 'only' play dash, ie will it not play booktyped media ie +R set to dvd-rom format (booktyping can only set +R discs to dvd-rom, -R discs can't be booktyped..) - if your son's player can play +R discs you can booktype them. That's only half the solution though as obviously there must be a reason why you're having trouble with dash media...
@Creaky My son's player prefers dash media but will play plus at times with a lot of freezing up even with my better quality discs. I have a feeling that the booktype utility that was given to me by the forum will definitly make a difference with that issue however, I still can't burn with Nero using dash media & I've followed all of the suggestions that have been given to me. I really don't think there's much that I can do but to go with the Sonic Record program which burns the dash media with no problems. This is all very weird isn't it? I happen to prefer Nero which I will continue to use. Thanx for the feedback. Jenlicris
plz help.....when i try to write something both my dvd-rw and cd-rw fail telling me disc changed (using nero 6.6.0.1 and 6.6.0.16) or drive not ready (using nero 7).....i tried almost everything......reinstalling the OS......using alcohol 120% instead of nero.....changing the discs....but nothing worked Here is a log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <SONY DVD RW DW-D22A> Version: BYS2 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <AXV CD/DVD-ROM >Version: 2.0B - HA 1 TA 2 - 7.0.0.0 Adapter driver: <SCSI> HA 1 === Scsi-Device-Map === CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 0 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 0 ID 1 DMA: Off DiskPeripheral : Maxtor 6Y080L0 YAR4 nvidesm Port 1 ID 0 DMA: Off DiskPeripheral : WDC WD1600JB-00GVA0 08.0 nvidesm Port 1 ID 1 DMA: Off CdRomPeripheral : SONY DVD RW DW-D22A BYS2 nvidesm Port 1 ID 0 DMA: Off CdRomPeripheral : TEAC CD-W552E 1.13 nvidesm Port 1 ID 1 DMA: Off === CDRom-Device-Map === SONY DVD RW DW-D22A K: CDRom0 TEAC CD-W552E L: CDRom1 AXV CD/DVD-ROM M: CDRom2 AXV CD/DVD-ROM N: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 146MB (150096kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.9.2005 ISO compilation 8:51:30 #1 Text 0 File Isodoc.cpp, Line 6410 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 8:51:30 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 72704KB of Memory 8:51:30 #3 Text 0 File Reader.cpp, Line 124 Reader running 8:51:30 #4 Text 0 File Writer.cpp, Line 113 Writer K: SONY DVD RW DW-D22A running 8:51:30 #5 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 8:51:30 #6 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 8:51:30 #7 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2148319 (477:24.19, 4195MB) 8:51:30 #8 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 8:51:30 #9 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: SONY DVD RW DW-D22A, Media type: DVD-R Disc Manufacturer: PRINCO - Disc Application Code: 64, Disc Physical Code: 193 8:51:30 #10 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:51:30 #11 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2148320 (2148320) = #2148320/477:24.20 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148320 blocks [K: SONY DVD RW DW-D22A] -------------------------------------------------------------- 8:51:30 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [K: SONY DVD RW DW-D22A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4399759360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2148320 | lead-out | 1 | 0x41 | 0x00 8:51:30 #13 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:51:30 #14 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 8:51:30 #15 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 8:51:30 #16 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 8:51:30 #17 Phase 32 File dlgbrnst.cpp, Line 1724 Simulation started at 4x (5,540 KB/s) 8:51:30 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:51:30 #19 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode for Multisession 8:51:30 #20 Text 0 File MMC.cpp, Line 21541 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 8:51:30 #21 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 8:51:30 #22 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:51:42 #23 SPTI -500 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 02 80 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x047f0000: Len x10000 0x76 B8 7A BC 4C 65 48 40 71 82 A5 B9 BA F5 0A 45 0x3E EA 7B 1E F1 8E 66 E9 C7 06 61 54 EF 60 FB EE 0x38 29 BD 64 DF 3E 4D 93 B1 FA C9 30 66 F0 A2 3F 8:51:46 #24 SPTI -1033 File SCSIPassThrough.cpp, Line 306 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 02 80 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 Buffer x04d1f200: Len x10000 0x76 B8 7A BC 4C 65 48 40 71 82 A5 B9 BA F5 0A 45 0x3E EA 7B 1E F1 8E 66 E9 C7 06 61 54 EF 60 FB EE 0x38 29 BD 64 DF 3E 4D 93 B1 FA C9 30 66 F0 A2 3F 8:51:46 #25 CDR -1033 File Writer.cpp, Line 302 Drive not ready K: SONY DVD RW DW-D22A 8:51:46 #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:51:46 #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:51:46 #28 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 639 8:51:50 #29 Phase 133 File dlgbrnst.cpp, Line 1724 Writing short lead-out 8:51:50 #30 CDR -1033 File WriterStatus.cpp, Line 167 Drive not ready K: SONY DVD RW DW-D22A 8:51:50 #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 8:51:50 #32 Phase 34 File dlgbrnst.cpp, Line 1724 Simulation failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 1:28:14 (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=5, 0, 0, 0, size=101504 bytes, created 8/30/2005 5:24:38 (InCD4 driver for win NT/2K/XP) File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/3/2004 7:59:42 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@Gaby1991 - - i didn't think Nero 7 was out 'til October. plus i don't trust the first version of a new release. But at least you state you've experimented with different versions/programs - your burner's firmware is 1 revision behind - http://dhc014.rpc1.org/Files/DVDR/DW-D22A_BYS3b.zip - is this burner in an external enclosure ie USB or similar ? - DMA needs to be ON, reload your motherboard's (Nvidia) drivers - you have sufficient total memory, but try to close down more programs prior to burning to enable sufficient free memory - were you intending to do multisession discs ? (just checking) - Princo - not very good discs. Try better discs. - great idea, at least you're not wasting discs this way - lmao, that's a great error though!, but to be serious, i think it's just saying there's a drive problem - if actioning all the suggestions doesn't help, it's always possible you got a duff drive, unless you can plug drive into another PC to test it further.. - InCD is Nero's 'packet wrting' software. get rid of it by uninstalling Nero, uninstalling completely via Nero's Clean Tools, then install Nero WITHOUT InCD
Hi I'm having some trouble... I Try to burn Vob files (dvd - iso) and with nexxtech 16x dvd+r dvds i keep getting this problem... Using Dynex dvd+r dvds i can burn movies fine. My real dilemma lies in the fact that I bought 60 Nexxtech and only 5 dynex I want to use up some of the nexxtech too.. can anyone find anything wrong here... If you do or can help.. please respond THANKS IN ADVANCE - jay Jay Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=71680 bytes, created 26/10/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4160B D: CDRom6 ATAPI CD-RW 40X12 E: CDRom1 Generic DVD-ROM F: CDRom8 ======================= AutoRun : 0 Excluded drive IDs: WriteBufferSize: 70254592 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 479MB (490992kB) Free physical memory: 190MB (194628kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.9.2005 UDF/ISO compilation 9:20:05 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 9:20:05 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 9:20:05 PM #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 9:20:05 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 9:20:06 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 9:20:06 PM #6 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4160B running 9:20:06 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:20:06 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 9:20:06 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 9:20:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1012447 (224:59.22, 1977MB) 9:20:06 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 9:20:06 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 9:20:06 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:20:06 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1012448 (1012448) = #1012448/224:59.23 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1012448 blocks [HL-DT-ST DVDRAM GSA-4160B] -------------------------------------------------------------- 9:20:06 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2073493504, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1012448 | lead-out | 1 | 0x41 | 0x00 9:20:07 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:20:07 PM #17 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 9:20:07 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:20:07 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5,540 KB/s) 9:20:07 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 9:20:07 PM #21 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 9:20:07 PM #22 Text 0 File DVDPlusRW.cpp, Line 665 Start write address at LBA 0 DVD high compatibility mode: Yes 9:27:08 PM #23 Text 0 File WriterStatus.cpp, Line 116 <HL-DT-ST DVDRAM GSA-4160B> start writing Lead-Out at LBA 1012448 (F72E0h), lenght 0 blocks 9:27:08 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:27:46 PM #25 SCSI -1194 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x04 CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x35 0x20 0x00 0x0E 0x73 0x04 9:27:46 PM #26 CDR -1194 File ThreadedTransferInterface.cpp, Line 1909 PMA update failure HL-DT-ST DVDRAM GSA-4160B\H1 T0 9:27:46 PM #27 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1909 Could not perform end of Disc-at-once 9:27:46 PM #28 SCSI -1176 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x03 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x35 0x35 0x31 0x0E 0x72 0x03 9:27:46 PM #29 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 9:27:46 PM #30 CDR -1176 File WriterStatus.cpp, Line 167 Session fixation error HL-DT-ST DVDRAM GSA-4160B\H1 T0 9:27:46 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 9:27:46 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 10:00:00 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 22/08/2004 4:31:48 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
@jvsquared Here's a few things: Your latest firmware is A306. Here's a link to update: http://forum.rpc1.org/dl_firmware.php?download_id=1923 Ugh - crap media and probably the cause of your failure. Use quality media like Taiyo Yuden and Verbatim DataLifePlus. Buying in store go with the Verbatims, Fuji or Sony (last 2 look for made in Japan). Crappy media causes lots of problems - if it does burn there can be playback issues and it will probably degrade making them useless. direct correlation to those bad CMC's. Update your firmware and pick up some quality media - you won't regret it!
@jvsquared - all i can add is pls EDIT OUT your email address before a moderator sees it or a spammer gets it...
Thanks Blinky and Creaky lol... I love how your names are adjectives. But Thanks for all the help.. I'll be back if it doesnt work Muhahahah!!!
