Eurovox flashing step by step.

To be honest we are going to be in here some time and i'm falling asleep in front of my PC (Too many Beers LOL), come back in the morning and I will TRY to talk you though it or maybe if she's up Celts may help you out.

Until tomorrow good luck

 

Have an EX1000SL, does it matter if you turn it off after you have flashed it and before you scan it? My computer is in a different room to the tv so I have to flash the box, then unplug it and take it to the tv and plug it in again to do the factory reset and the scan. I only ask because I get the freeview channels and everything else is a "channel scrambled". Have I missed anything out?
Mike

 

once its flashed with the right firmware and you didnt turn the box off too soon then no it wont matter, switch it off again for a minute and switch it back on to sly sports for it to search for the channels.DONT change the channel as its working or itll start the search all over again

 

What did you flash it with , press menu, config, system info and tell us what it reads in there.

Axxxo do you ever go to bed 03:34!!!

 

was just finished work!lol, had to have a nightcap

 

Hi, Im back and still no joy any ideas

 

Here's the info;

DVB-XC BoxS TDA
1.0 ST4 Aug 21 2008
2.0ts
V001
KURO

 

did you get a cd with the cable to install it? drivers to actually make it work?
drivers can be found here if you didnt
http://www.gilsson.com/usb_drivers_download.htm

 

No i didnt, ill try this link

 

do a restart with the cable plugged out, install the drivers, then plug it back in, hopefully you'll get it working then.
i gotta go but good luck you might still have to play with com ports when its installed but that should be whats needed, think hiteck is still around (with a sore head)if you still have trouble

 

my cable is a db9 and im not using the adaptor cable. What do I do in tha case?

 

my apologies i thought you were using an adaptor, cable is faulty i would imagine if it does not work straight from the pc, try another is only option!

 

OK, turned it off for a minute, turned it back on and put it on sky sports one, it's been there for about 15 minutes, still says scrambled channel, or does it take longer?

 

Big thanks HiTeck for putting this together. I have never done anything like this before an it was straight forward following your guide. An thanks again to SG8 for pointing me in the right direction.

 

Thank you mate for letting us know, glad you found it easy.

 

Press menu then ok on lanuage settings, type 1968 then the hidden menu will show, where it says emulation make sure its set to enable.

Edit: where did you download the firmware from?

 

Did you change the device manager settings (com/ports) settings to com 3,

where its listed at com 1 right click select properties, select port settings, then advance, where the com1 pull down box is press the arrow and select com 3 then ok. then give it a try.

 

Did that and nothing happened, no hidden menu

firmware came from; http://cablebox.4shared.com

 

Why didn't you use page 1 of this thread for the firmware? you will find once you have all them scrambled channels will work as you have downloaded the FTA firmware Flash the box agian and follow the instructions given. Let us know how you get on

 

The site reccomendation for the firmware came
with the box, will try yours and let you know how I get on.
Regards