Eurovox TX no aerial signal

If nobody moved your aerial or disconnected the cable to your aerial you still get ch*rus mmds.

 

Hi lads,just reading up on this thread.Im having similar prob.Have the Eurovox tx.Getting no signal for awhile now..My neighbour told me that a nthell engineer who was in her house seting up her box,that they changed over to the dublin line..(dvb t - dvbc??)Does this mean we are no using dvb c boxes??and if so excuse my lack of knowledge but will a eurovox ex1000 sl work??
tanx lads for any replys in advance

 

if you have changed over to the dub line then yes the eurovox ex1000sl will work
just to be sure you should now have basic cable coming in your house and you have to pay for a basic connection before you can connect your box.
also im not sure about this some1 correct me if im wrong i think you can still put an aerial up and get your ex1000sl to work

 

Hilads,ref d above.I was using eurovox tx,lost signal.Tried a eurovox 1000 sl today and hav all chanells.So looks like they changed over onto dublin line.
tanx for replies

 

Another Q??Anyone know if the HD ready boxes are any goood and which would you recommend??
TANX

 

as far as i know we can't get hd channels on our boxes in ireland at the moment
re:your last post, now that they have changed over and you can use your ex1000 now
does it still work of your aerial or do you have cable now?

 

working of the cable mate

 

Getting signal of 86% with Eurovox Max on mmds freq 282 symbol rate 6887 modulator QAM64 when i scan some channels appear on menu but i get no picture

 

Go to MENU--OK--1968--enable emulator--red to save.
Try a POWER-SCAN 240MHz to 400MHz sym rate 6887.
If U*C are using N*L mmds in your area you will get picture on about
10 chls.,whitch are FTA or NAGRA 1.All other chls. are nagra 2.
The newer boxes with N2 fix should work perfectly.
Let us know your area, & if you were on CHO*US area previously.

 

Hi EAMO_TOO

I,m in Dunshaughlin Meath area i did what you said got 12 channels but no piture or sound any suggestions

 

Maybe someone in the area could advise you.
Check syst.info. to see have you latest software (nov/dec 2008)
If not you'll have to flash box or put in codes(18/12/2008)manually
To enter codes; MENU--OK--1968--1968 or MENU--yellow
You should be getting more than 12 chls.when you scan.
If you have time try deep scan 6887
If you want a long shot try a scan using sym.rate 6875
Make sure emulator is turned on

 

i,m half way trough deep scan on 6875 nothing yet is it possible its nag 3 now

 

Hi vin1974 as far as im aware there is no fix out yet for eurovox max,however there is a fix out for the ex 1000 sl eurovox which is wat im using meath area

 

All chls. are running on N3 & N2 except FTA, & some chls. are still
running on N1.
If firmware is OK or latest codes are added & EMU is enabled you should
be able to view FTA & N1 chls. on MAX-V. Make sure cable is in RF in.
Come back with a few details;
How many chls. scanned using 6887 sym rate
Did any chls. scan using 6875 sym rate
What firmware is on box & are codes up to date
Are you using an aeriel & is your power supply plugged in

 

no joy with eurovox max trying eurovox ex1000 sl now. I,ll let you know how i get on

 

ihad no luck with euro max trying eurovox ex1000 sl now can you tell me the settings for it

 

Make sure box is flashed with N2 fix 1000sl july 2009

 

loaded nag2 fix july 09 did a scan still getting nothing i,m lost and pulling my hair out at this stage

 

What box did you load the fix onto??The fix will not work on the Eurovox max!!