1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

help connecting to xbox with flashFXP

Discussion in 'Xbox - Backup discussion' started by ger08, Jun 15, 2005.

  1. LoneWolfD

    LoneWolfD Member

    Joined:
    Jul 2, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    umm....i think im done....im not sure. =D
     
  2. LoneWolfD

    LoneWolfD Member

    Joined:
    Jul 2, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    Xbox Settings
    IP..............192.168.0.2
    Subnetmask......255.255.255.0
    DefaultGateway..192.168.0.1
    DNS.............192.168.0.1
    DNS.............0.0.0.0

    PC Settings
    IP..............70.244.20.89
    Subnetmask......255.255.255.0
    DefaultGateway..70.244.20.90
    PreferredDNS....192.168.0.1
    AlternateDNS....192.168.0.3

    Does this seem right?
     
  3. will42082

    will42082 Guest

  4. tEChniiQue

    tEChniiQue Guest

    @LoneWolfD
    The Static IP will be created off of your Default Gateway. My Gateway is 192.168.1.1

    My settings are as follows:
    PC
    Static IP:..... 192.168.1.100
    Subnetmask......255.255.255.0
    DefaultGateway..192.168.1.1
    DNS.............202.128.7.1
    DNS.............202.128.31.1

    XBOX
    Static IP:..... 192.168.1.200
    Subnetmask......255.255.255.0
    DefaultGateway..192.168.1.1
    DNS.............202.128.7.1
    DNS.............202.128.31.1

    You may have to call your ISP to figure out what your DNS Servers are.

     
  5. LoneWolfD

    LoneWolfD Member

    Joined:
    Jul 2, 2005
    Messages:
    20
    Likes Received:
    0
    Trophy Points:
    11
    actually i dont think i have to go through all this. It seems to me its connecting but somethings wrong. The last 2 entries in the log entry window are...

    [R]150 Opening ASCll data connection for is /.
    [R]226 Transfer finished successfully. Data connection closed.

    ...do u know whats wrong?
     
  6. tEChniiQue

    tEChniiQue Guest

    Did you try to transfer something? If you were not able to FTP into your xbox, see the drives available C, F, etc...then your connection was not successful. If that is the case, then I still offer you my prior recommendation. Either that, or buy a cheap LAN card...add it to your PC and just use a crossover cable to connect your xbox to your PC. Either way, you will need a static IP setup between the two connections.
     
  7. will42082

    will42082 Guest

    lonewolf, you said your dns servers are 192.168.0.3 and things like that, that's not correct, those are your router ips, if you get on your pc and click start, run, then type "cmd" hit ok, from the dos prompt, type in "ipconfig /renew" you will see your dns servers
     
  8. wakker

    wakker Member

    Joined:
    Oct 24, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    PLEASE help me out. i know i gotta be doin somthin stupid. i have a modded xbox with a 60gb hardrive,evolutionx, and avalaunch. im tryin to connect my xbox and computer(duh). i been sittin in front of my tv for over 4 hours tryin different ways to connect. one of my freinds did everything for me and hurricane katrina hit n now i cant get in touch wit him. i have downloaded flashfxp and craxtion4. it keeps sayin that connection is lost. please im me. aim is wac2002.
     
  9. tEChniiQue

    tEChniiQue Guest

    @wakker
    The more info you give, the easier it would be to help you.

    Is your setup and attempt a direct connection, xbox to pc via a crossover cable?
    Or is it over a network by using a router or hub of some sort?
     
  10. sexykid

    sexykid Member

    Joined:
    Oct 24, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    hey guys... i just started to think about modding and i just cant seem to get the mods from the internet to my AR... it keeps saying it is not a valid xbox save... u got any pointers???
     
  11. wakker

    wakker Member

    Joined:
    Oct 24, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    srry. im tryin to connect my xbox to my pc using a lyksis wireless router(im not usin the wireless feature at all).
     
  12. tEChniiQue

    tEChniiQue Guest

    @wakker
    Do you mean a LinkSys router? Either way, your setup should be easily done then. Plug your xbox into the router. Make sure that DHCP is enable on the XBOX and on your PC. Turn on your XBOX and the IP should be displayed on the main screen of your dashboard. Us that to create a connection in your FTP Client. The user name and password is usually xbox & xbox.

    That should be it, try to connect and post if you have other problems.
     
  13. wakker

    wakker Member

    Joined:
    Oct 24, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    im pretty sure that i have dhcp enabled on both. i have also disabled the boost feature on my xbox
     
  14. TheAwaken

    TheAwaken Member

    Joined:
    Oct 25, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    i set my computers ip to static now what do u mean by "tEChniiQue : All the info will be the same for the two EXCEPT for theI IP address itself" how do i know what to set it to???? im confused.plz help me tEChniiQue!!!
     
  15. tEChniiQue

    tEChniiQue Guest

    @TheAwaken
    That is exactly what I mean. My setup between my main xbox and PC is like this:
    (Also liste above)
    PC
    Static IP:..... 192.168.1.100
    Subnetmask......255.255.255.0
    DefaultGateway..192.168.1.1
    DNS.............202.128.7.1
    DNS.............202.128.31.1

    XBOX
    Static IP:..... 192.168.1.200
    Subnetmask......255.255.255.0
    DefaultGateway..192.168.1.1
    DNS.............202.128.7.1
    DNS.............202.128.31.1

    http://www.portforward.com/networking/staticip.htm
    That link will help you to setup a static IP on your PC...write down the info so you can inout it in your xbox as well.
     
  16. wakker

    wakker Member

    Joined:
    Oct 24, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    im till having problems. evolutionx will not let me change any setting because it doesnt save them. it keeps reverting back to the defult ones. my xbox has no dns. aim wac2002 yahu wacyd69
     
  17. steimy

    steimy Active member

    Joined:
    Dec 2, 2004
    Messages:
    12,011
    Likes Received:
    1
    Trophy Points:
    96
    With the EvoX are you going down to the bottom
    where it says save & exit and clicking on that?
    I have EvoX and it saves all my changes just fine?
    On mine using a Cat 5 cable (patch cable, Crossover cable)
    I have my static IP set to off.
    I had to set up internet sharing on my main connection so
    that the LAN connection would work. Once i did that and
    hooked up the cable it assigned an IP adress to the Xbox
    and as tEChniiQue said then i just took the IP that it
    assigned to the Xbox and entered that in FlashFXP and put
    in the username and password both as xbox(all lowercase)
    Then it would connect. where the IP address can be eneter into
    the xbox manually i entered 1 number higher than what it listed on
    my LAN connection in the PC
    Like if the PC LAN said it was 198.168.0.1
    I entered 198.168.0.2 into the xbox.
    The subnet mask and default gateway were the same as listed above.
    If he can't help you get it working i am not sure who can.
     
    Last edited: Oct 26, 2005
  18. wakker

    wakker Member

    Joined:
    Oct 24, 2005
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    when i have made changes to the settings, i go all the way at the bottom and exit. i do not see a save and exit,just exit. i think this is where my problems are.
     
  19. MartyT

    MartyT Member

    Joined:
    Oct 26, 2005
    Messages:
    10
    Likes Received:
    0
    Trophy Points:
    11
    I'm sorry if I come off as extremely uninformed but a friend of mine set up FlashFXP for me and showed me how to connect my modified xbox and computer to transfer files. It has worked fine for about 2 months but recently I haven’t been able to connect to my xbox. I haven’t changed any settings so I have no idea what could be wrong. Could have something to do with my xbox settings or my FlashFXP settings?
     
  20. tEChniiQue

    tEChniiQue Guest

    @MartyT
    First thing you should do is check to make sure your Site information within FXP is the same as you xbox's info. I'm referring mainly to the IP. If your connection is DHCP, the IP is the onlyy thing that might have changed if you have maunally changed anything.

    Make sure the IP on the XBOX matches the IP set for the xbox in FXP.
     

Share This Page