kryptView Updating & Scanning Tutorial

Hi trying to load firmware to box but its saying ( can't open serial portcom 1. baudrate 115200bps. party no parity. databyte 8 bit/data.stop bit 1
Got any ideas. I'm running window 7 thanx

 

you either need to set your com port up or i suggest you use a win xp pc to do it or try this below should be the same

ok first go to start go to my computer righ click and go to properties

go to hardware tab >> device manager go to ports ( COM & LPT )

click on the little + sign and find com port 1 or what ever com port number it says remember the number Communications Port

click on it to highlight it then right click it go to properties then look for port setting tab on top

click that i there you will see

bits per second set this to ======= 115200

data bits ========= 8

parity ============ None

stop bits ========= 1

flow control ====== None

then go to advance button and press ok

next setting in there is

tick the top option MAKE SURE THIS IS TICKED

receiver buffer ======== High (14)

Transmit buffer ======== High (16)

com port number use the tab on the side and change it to 1 if it says in use ignore it and force it to use this

MAKE SURE WHEN YOU DO THESE SETTING YOU PRESS OK ON THE RIGHT TO SAVE ON FIRST BOX

THEN OK ON THE NEXT BOX AS WELL THIS MUST BE DONE

THEN GO BACK INTO THE DEVICE MANAGER AND CHECK YOUR SETTING TO MAKE SURE THEY ARE CORRECT

 

ok will try. tar

 

well other than that borrow a pc or work pc with XP on it

 

@e45 the krypt A750 firmware in your link is that the latest 1 out to go with the Iconnect

 

hi.got it to work. had to load "prolific driverinstaller" to run on port 10. took a bit to figure it out to work on windows 7.
PS. 1 after network search do you leave your box on standby for 1hr or so to scan?
or shud it have NET ID on screen
2 Telewest it says. already exist. NO MUMBERS

 

THANK YOU 4 NOW will try to momorrow

 

you need to factory reset your box first then auto scan top box your provider

next box is defaulted to network LEAVE that

press green button

next screen list of net id or get this from your subbed box to be the correct one

then press ok let the box scan after finished plug your ethernet cable into it job done

 

hi, i'm using a kv750 & iconnector, getting all programs. But can't see sly box office sports which will be showing the big boxing program soon. There are 2 PPV channels listed, could 1 of these be box office?

 

hi45. factory default. ok tick
please wait tick
then it go's to :EASY INSTALLATION:
press automatic search.. network-telewest tick
channel search type..network
press green butt..tick
please wait
No net id
in a green box COMPLETE!(EXIT)
sorry but i do not no what i'm doin wrong
keeps goin back to EASY INSTALLATION

THANKS GOIN TO BED TRY TOMORRA

 

ok check the system info page and tell me the date you see for the software on the box ??

 

24/08/2010
KRYPTVIEW A780 PV3.500
H/W V3.00

THANKS

 

ok go into the menu installation and scroll down to the S/W Update and press ok to that and let the box update to the latest file available let me know then

 

ppv is where the fight should be on

 

ppv is where the fight should be on

 

hi 45
09/09/2010
pv3.6.00
v3.00
tar

 

ok no do factory default go to menu installation >>> factory default then turn the box off at the back of the box for 30 seconds then turn it back on then auto scan provider top bottom left to network then green button

after that you should get a list of net id pick your one if ya dont know it get it from your subbed box to be 100% sure you are on the correct one then press ok after the scan is finished connect up your ethernet cable and that is it

JUST MAKE SURE YOU ARE ON DIRECT FEED NO SPLITTERS WHEN SCANNING YOUR BOX

 

hi45
1 factory default, turn of 45 seconds
2 scan provider (telywest)(virg) now)..channel search type (network)
3 green button
4 list. 1to10 ALREADY EXIST.. No id to pick one of
5 green box (complete EXIT)
6 PRESS exit says please wait gos back to Easy installation
HAVE TRY'D 4/5 TIMES
TP 11/11 SIGNAL STRENGTH 56 signal quality 0
no ethernet
no splitters
sorry this must be a bummer 4 you its doin my head in
thank

 

scan on your old provider and make sure you are using the correct symbol rate 6952 not 6887

 

try'd them all. factory defalt all NTL.EX-C&W.CHORUS.TELEWEST.
STILL NO ID
THANKS
LIST OF NETWORKS ID NONE
2BOX TV CHANNELS 0 RADIO CHANNELS 0
787.00 6.952 64 QAM

complete (exit)

and that is it after scan