Mobile Phone Tools Download

Discussion in 'Motorola phones' started by GeeDaddy, Nov 2, 2004.

Thread Status:
Not open for further replies.
  1. Someguy2

    Someguy2 Member

    Joined:
    Nov 1, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Thank you guys for the tips. I'm about to break the stupid BlueTooth Dongle :) Wish I could do some destruction on the MobilePhoneTools software too but it looks like it's screwed up already even without my humble imput. All these versions, updates, patches, drivers and still it's not that user-friendly. Hope next time arount the software "engineers" will write it with their hands and not feet.
    I'm off to RadioShack to get a cable....
     
  2. sharman

    sharman Member

    Joined:
    Nov 4, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hey i have a V3 razr, i got the usb cable and software, when i plug the phone it it detects it, but then i open mobile tools, it says intalling, takes like 5 min, than it goes to program but the phone isnt there. i installed the motorla USB modem driver, it says the device cannot start.
     
  3. Eskimonio

    Eskimonio Regular member

    Joined:
    Oct 18, 2005
    Messages:
    133
    Likes Received:
    0
    Trophy Points:
    26
    hrmmm could be a ton of reasons...I am guessing you HAVE tried restarting your computer to see if it worked after restart, yes?

    The only other thing u could try is if you're on WINXP, go to START > Control Panel > Phone and Modem Options then see if you have MOTOROLA USB modem listed...if so, check your com port...I've read that MPT really only works with com 3 or Com 4. Don't know if this is gospel or not, but sometimes, just connecting the phone to a different USB port on your computer will do the trick.

    ALSO, prolly best to hook the phone up to one of the USB ports in the BACK of the comp, rather than a powered hub like thru a keyboard usb port...again, don't know if that even makes a difference, but you're avoiding one more reason for it not to detect.

    If all of the above is true, you MIGHT try opening MPT, THEN hitting the menu button on the phone graphic of MPT, then I think it's tools or setup and try to "add new phone" that way.

    This is all from memory, but if you hit that menu button and check out the options, you'll find "add new device" or phone or something like that, and you will probably have success.

    BTW, if you're still not having sucess and need to post further, you may want to think about making a new post titled "MPT won't recognize my phone" or something. This post has turned into a monster, and has really strayed off topic from it's title. I don't care either way, but u may have more peeps looking at an individual post that can help u...cuz many won't dig thru this monster.
     
  4. all2kool

    all2kool Member

    Joined:
    Oct 3, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
  5. kcee

    kcee Member

    Joined:
    Nov 10, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    I have the motorola E815 and I just got the data cable that I need to connect the phone to my pc. However when I try to get mpt to setup the phone it will seem like it is setting it up, and then when it almost reaches the end of setup it will go back to the main screen where it asks me to choose which type of connection i'd like. It will also tell me that mpt will not work properly without a phone installed and ask me if i'd like to do so. I waited forever for the usb cable...can somebody please help! btw...i have version 3.23 of mpt. Thanks.
     
  6. Someguy2

    Someguy2 Member

    Joined:
    Nov 1, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Het,kcee...
    If you read this forum you'll find the answer, i'm sure. Still, I think that's 'cause you have the driver messed up. Here's the instructions that helped me (it was posted here already by one of the guys) it's for the razr phone but that doesnt matter 'cause it shows you how to install the driver properly. Just follow this:

    PS: If Windows doesn't prompt you to "found new hardware" then go to Device Manager and Update the driver on the Motorola Modem #? (3,4,5 Depends which USB port you have the cable attached). Point Windows to the driver from the Mobile Phone Tools (see step 7)
    Good luck!
     
  7. kcee

    kcee Member

    Joined:
    Nov 10, 2005
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    it works... thank you!
     
  8. adder58

    adder58 Member

    Joined:
    Nov 13, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Hi 1st time on this forum. It loooks very informative. Don't know if this problem has been posted before or not. Getting to tried and ratty with the pc. Have used mobile phonetools before, no probs. Had to reinstall new hard drive recently, now trying to get the photos off the phone and onto pc but keep getting "error on line 11, position 16. a semi colon was expected"

    Can anyone help me???
     
    Last edited: Nov 13, 2005
  9. Ace7207

    Ace7207 Guest

    were do i go to download mpt.? i am lost i need help bad
     
  10. macsmith

    macsmith Member

    Joined:
    Nov 14, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    Do I need MPT to charge my Razr V3 from a non moto usb charger? I have a wall and car usb charger for my iPod and the right cable, but the phone doesn't charge. Does MPT install stuff to the phone? I don't use windows in my daily life, I can use/find one to install the software if it's a one time deal.
    Thanks much.
     
  11. nswolter

    nswolter Regular member

    Joined:
    Mar 8, 2005
    Messages:
    110
    Likes Received:
    0
    Trophy Points:
    26
    i think you can charge the phone with just the driver - p2k
     
  12. vajami

    vajami Member

    Joined:
    Nov 15, 2005
    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    11
    the add that you give is not working and I had my firewall down and still nothing
     
  13. infiri

    infiri Member

    Joined:
    May 6, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Hi, i have install MPT but when I try to run it and is scanning for the cellphone using USB for a V220.
    Durring the device configuration wizard at the end this comes
    modem identification
    Opening motorola USB Modem, i have it
    Not accessible or in use b another application.
    I dont get it which upplication is using it....
     
  14. infiri

    infiri Member

    Joined:
    May 6, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Well P2K file manager is working but not the MPT
    I downloaded my pictures using P2k File Manager but cant find the contact list in the Manager,,,
    My cell phone is broken, it doesnt display any information it still works but I cant use since the little monitor doesnt work,, I got a new cellphone but my contacts are in the phone, and not in the sim card :-(
    How can i get the contact list using P2K file manager since MPT is not working for me????
    Please help....
     
  15. Milt22NYC

    Milt22NYC Member

    Joined:
    Nov 17, 2005
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    When I click on Live Update, nothing happens. No prompts or anything.
     
  16. Scharmann

    Scharmann Member

    Joined:
    Apr 30, 2005
    Messages:
    24
    Likes Received:
    0
    Trophy Points:
    11
    Are you using a final retail version of MPT's if so you cannot use live update. It's disabled on final retail versions.
     
  17. ctidcarl

    ctidcarl Guest

    WOW - what a thread!!

    I thought I was doing sooooo well, but I'm now stuck at a problem and I've read so much about MPT & drivers on various forums over the last few days, that everything has become a blur!!

    If I tell you what stage I'm at, I would appreciate a few pointers in the right direction -

    I've downloaded MPT 3.23 & live updated to 3.28
    I've set my modem port as the Motorola USB cable
    I've manually selected ROKR E1 (& E1 itunes for another try)

    I'm now at the stage where I get an icon on the phone screen (on the PC) telling me my mobile is not connected.

    I've also had a message telling me my "Device has been identified but not recognised" (even tho its on the list!) - Is this a driver issue??

    My phone, by the way is the ROKR E1 and my operating system is windows 98 SE.

    Thanks in advance
     
  18. teror

    teror Member

    Joined:
    Nov 20, 2005
    Messages:
    7
    Likes Received:
    0
    Trophy Points:
    11
    Hello people
    I am a boy from holland
    and i need a download link voor the software of a V220
    can you help me ?
     
  19. sjm96

    sjm96 Member

    Joined:
    Nov 21, 2005
    Messages:
    58
    Likes Received:
    0
    Trophy Points:
    16
    OK, I am very confused.

    Here is my situation:

    I have:
    Motorola E815
    Motorola usb data cable
    Windows XP Home, SP 2
    Pentium 4

    I want to trasfer ringtones and pictures. Preferably with MPT or P2K.

    My problem(s): I don't have the software. All the links in this thread are making like iPods and becoming obselete the moment I click on them. I need to know what software I need, where I can get it, and how to set it up. My computer tells me the the usb drivers are all sorted out, and the add new hardware wizard says that everything's fine there. Please someone give me step-by-step instructions, but don't point me to other threads or that "Moto Hacking Bible", although that does have a lot of information. That information, however, has chosen not to work with me.

    Thank you,
    sjm96
     
  20. Goku99

    Goku99 Guest

    Hey can anybody help!! because I tried to go to the

    free.cz/motorola page and it says page not found, and the other page doesn't work either please HELP!
    I have a motorola C650
     
Thread Status:
Not open for further replies.

Share This Page