New Kryptview Firmware 12-07-2009

sorry sc0user for hopping in here, when you download the file save it to your desktop then open it from there, instead of downloading and opening it when it asks you, and then proceed from there,
here is a link for file and loader
http://www.4shared.com/file/117901457/b13a75d4/New_Kryptview_firmware__Loader.html

 

Downloaded the file and loader onto my desktop but still unable to get the bin file 120709 to load into the file box on the "code send" page. This is doing my head in as I had my kryptview box from last March programed within 5 mins

 

May have a faulty box. Got treee boxes delivered today and have been having trouble loading the firmware on the first box. Tried the other two and had them both upgraded within 10 mins. The first box wont start uploading the 120709 bin file when I switch the unit off to on during the sequence. Has anybody else had this problem. Will have to get on to the manufacturer to see what they will do.

 

I have a Kryptview, I have tried to load the Arnet Firmware but my computer (Using my workplace computer as I dont have access to any other) will not allow it (Sonic Firewall protection stopping it) I cannot turn off this protection. Is there any other way I can get the firmware?

 

read this from scouser and when u hit download turn switch off at back of box and straight back on

To see which port your USB adapter is connected to, connect your USB adapter and follow these instructions:

1. Go to the Start Menu
2. Right click on "My Computer"
3. Select "Properties"
4. Click on the "Hardware" tab
5. Click on "Device Manager"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter/null modem cable is connected to (e.g. COM1, COM2, COM3, etc.)
8. Go back to the loader and make sure it is looking at the correct port.
9. You should be able to download firmware once the correct port is selected.

 

Tried this mate, but still cannot pass the firewall protection. I am operating from a desktop computer.
Any other suggestions?
Thanks again....

 

just to add to the above, I am only getting as far as downloading, the it stops at nearly immediatly, so I am not even getting as far as actually loading the "Loader" due to the restrictions on my computer.

 

answered you already mate, dont multipost

all info here, if you firewall is stopping it, turn it off and try it then

http://forums.afterdawn.com/t.cfm/f-59/only_boxs_working_in_ireland_hints_and_tips-updated-782583/

 

That's the problem Micah, I cant turn off the firewall as I am using a work computer, or is there an easy way of turning off the firewall?
(Sorry for multiple posts, will watch it in future)

 

not unless your mates with the network admim/IT guy

 

yip or disable it on yer PC for a little while, but if its monitored by a network it will set alarm bells off, you may need to use a different PC to do the job if the above cant be done.

 

Guys I tried using a laptop to flash the SL1000 and it worked OK.
Using a USB connection into a modem cable.

 

Thanks for the info guys, at least I now know this computer wont do.

 

Hi,

Just recently installed latest firware and everything is fine however if I now go to use the epg for specific categories such as sports if I am on Sky Sports 1 and then choose Sky Sports 2 via epg it will take me straight to Info Channel, can anyone help on this or do I use the older firmware?

 

if in the UK, you can use an older firmware, in ire, no, you need that for the box to work

 

Yes in Ireland, so I should have left it really as it was working on the old firmware with no issues with the epg.

Thanks for the repsonse anyway.

 

In Ireland you need to update the box, there should be no problem with the epg , but remember these boxes are not the same as a providers box, so dont be expecting everything to be the same as their box.

 

of course the epg is not the same as the service provider, thats not my issue.
I have downloaded the 12/07/09 firmware, installed it and when I use the epg for choosing channels, no matter what channel I choose it goes straight to the Info channel. I have installed the Mar09 firmware and this works fine.

 

Well what ever works best for you thats the file you should use

 

Hi, Got a kryptview and set to factory delault settings and can get rid of easy install and the downloader gives an error when trying to download the latest file.

Can some help me to find out how to update the software please.

Thanks Kenneth