Thanks for your advise. I will try your suggestions. Actually I was able to burn a DVD only once 2 days ago. I did everything what was suggested to me and I was able to burn the DVD and unfortunately I do not remember if I had other programms running but I don't think so. I will try it again. The only thing is, I could not read the DVD afterwards. It kept ejecting from my CD Rom. Any suggestions? How do I buy more space? Can I do that by ordering and than downloading from the link you gave me? Thank you again, I would have replied directly to you rather than through your shoutbox but I did not have a reply button on the message because someone replied to my message after you. Elly
Attached is the History File. It was on January 13/08 that I finally was able to burn a DVD successfully but could not read it. As a matter there was no indication that I had a disk in the CD Rom Drive. Thank you for your help. Can I delete these history files after they served its purpose? Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 82MB (84968kB) Memory in use : 78 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2008 ISO compilation 11:43:53 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:43:53 PM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:43:54 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:43:54 PM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 11:44:15 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685 Aborted by user 11:44:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:44:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 11:44:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.) 11:44:15 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 82MB (84264kB) Memory in use : 78 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2008 ISO compilation 11:46:23 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:46:23 PM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:46:23 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:46:23 PM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 11:46:30 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685 Aborted by user 11:46:31 PM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:46:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 11:46:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.) 11:46:31 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 79MB (81428kB) Memory in use : 79 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2008 ISO compilation 11:48:58 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:48:58 PM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:48:58 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:48:58 PM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 11:49:05 PM #5 Phase 40 File dlgbrnst.cpp, Line 1685 Aborted by user 11:49:06 PM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:49:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B Medium not present 11:49:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD DL.) 11:49:06 PM #9 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 178MB (182292kB) Memory in use : 53 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.1.2008 ISO compilation 11:51:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:51:34 PM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:51:34 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 11:51:35 PM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 11:51:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 70335 ( 15:37.60, 137MB) 11:51:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:51:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 11:51:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:51:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 70336 (70336) = #70336/15:37.61 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 70336 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- 11:51:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 144048128, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 70336 | lead-out | 1 | 0x41 | 0x00 11:51:35 PM #11 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:51:35 PM #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 11:51:38 PM #13 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 11:51:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 11:51:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 16x (22,160 KB/s) 11:51:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:51:38 PM #17 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:51:38 PM #18 Text 0 File DVDR.cpp, Line 5715 Drive: HL-DT-ST DVDRRW GWA-4164B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:51:38 PM #19 CDR -1207 File DVDR.cpp, Line 5645 Book Type automatically set to: DVD-ROM 11:51:38 PM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x075a13c0: Len x648 11:51:38 PM #21 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 11:57:43 PM #22 Phase 40 File dlgbrnst.cpp, Line 1372 Aborted by user 11:58:51 PM #23 SPTI -1135 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80 Buffer x07880040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 11:58:51 PM #24 CDR -1135 File Writer.cpp, Line 281 Write error E: HL-DT-ST DVDRRW GWA-4164B 11:58:52 PM #25 Phase 39 File dlgbrnst.cpp, Line 1685 Burn process aborted 11:58:52 PM #26 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:59:00 PM #27 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 11:59:00 PM #28 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 167MB (171464kB) Memory in use : 56 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2008 ISO compilation 12:02:09 AM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:02:09 AM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:02:09 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:02:09 AM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 12:02:09 AM #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 87951 ( 19:32.51, 171MB) 12:02:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 12:02:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 12:02:09 AM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:02:09 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 87952 (87952) = #87952/19:32.52 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 87952 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- 12:02:09 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 180125696, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 87952 | lead-out | 1 | 0x41 | 0x00 12:02:09 AM #11 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:02:09 AM #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 12:02:12 AM #13 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 12:02:12 AM #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 12:02:12 AM #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5,540 KB/s) 12:02:12 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:02:12 AM #17 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:02:12 AM #18 Text 0 File DVDR.cpp, Line 5715 Drive: HL-DT-ST DVDRRW GWA-4164B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:02:12 AM #19 CDR -1207 File DVDR.cpp, Line 5645 Book Type automatically set to: DVD-ROM 12:02:12 AM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x075b13c0: Len x648 12:02:12 AM #21 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 12:02:25 AM #22 SPTI -1135 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x80 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80 Buffer x07890040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12:02:25 AM #23 CDR -1135 File Writer.cpp, Line 281 Write error E: HL-DT-ST DVDRRW GWA-4164B 12:02:26 AM #24 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5,540 KB/s) 12:02:26 AM #25 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:02:33 AM #26 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 12:02:33 AM #27 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/18/2001 12:07:32 AM Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Elly Huhle Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRRW GWA-4164B>Version: 1.05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4164B atapi Port 4 ID 0 DMA: On DiskPeripheral : Maxtor 6L100P0 atapi Port 5 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4164B E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 57671680 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (391664kB) Free physical memory: 161MB (165480kB) Memory in use : 57 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 14.1.2008 ISO compilation 12:03:45 AM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:03:45 AM #2 Text 0 File Isodoc.cpp, Line 6494 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:03:45 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:03:45 AM #4 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 12:03:45 AM #5 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 70319 ( 15:37.44, 137MB) 12:03:45 AM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 12:03:45 AM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4164B, Media type: DVD+R Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 12:03:45 AM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:03:45 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 70320 (70320) = #70320/15:37.45 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 70320 blocks [HL-DT-ST DVDRRW GWA-4164B] -------------------------------------------------------------- 12:03:45 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [HL-DT-ST DVDRRW GWA-4164B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 144015360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 70320 | lead-out | 1 | 0x41 | 0x00 12:03:45 AM #11 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:03:45 AM #12 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 12:03:45 AM #13 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 12:03:45 AM #14 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 12:03:45 AM #15 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 8x (11,080 KB/s) 12:03:45 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:03:45 AM #17 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MBIPG101 Media type ID: R05 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8 23 54 37 11 02 3C 6E 02 - 84 68 15 15 0B 0B 08 08 #T7..<n..h...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 12:03:45 AM #18 Text 0 File DVDR.cpp, Line 5715 Drive: HL-DT-ST DVDRRW GWA-4164B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 12:03:45 AM #19 CDR -1207 File DVDR.cpp, Line 5645 Book Type automatically set to: DVD-ROM 12:03:45 AM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x074b13c0: Len x648 12:03:45 AM #21 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 12:04:57 AM #22 Text 0 File WriterStatus.cpp, Line 113 <HL-DT-ST DVDRRW GWA-4164B> start writing Lead-Out at LBA 70320 (112B0h), length 0 blocks 12:05:41 AM #23 Phase 37 File dlgbrnst.cpp, Line 1685 Burn process completed successfully at 8x (11,080 KB/s) 12:05:41 AM #24 Phase 78 File dlgbrnst.cpp, Line 1685 Data verification started 12:05:58 AM #25 SPTI -1047 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 03 50 00 00 10 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64 Buffer x074d1500: Len x8000 12:06:25 AM #26 SPTI -1047 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 04 20 00 00 10 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64 Buffer x074d1500: Len x8000 12:06:25 AM #27 SectorVerify 20 File Cdrdrv.cpp, Line 9901 Read errors from sector 848 to 863 12:06:31 AM #28 SPTI -1047 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1047) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x64 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 04 30 00 00 10 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 64 Buffer x074d1500: Len x8000
@ EllyHuhle The "space" that you are referring to I think is the "memory" that believeNC suggested that you should buy. That is RAM memory, it is a piece of hardware that you buy it and put it in your computer. You can buy it from that website. Info about memory upgrade: http://computermemoryupgrade.mysuperpc.com/ It is all good, just hit "replay" after the last poster. When you respond, you respond to everyone that posted in your thread. If you want to address your message to someone in particular, just write "@", or "to", followed by that members username.
looking better but get some good dvdrs like TY or verbatims... + format needs to be booktyped for better compatibility, or try -R
Never seen this media code before. Take Rotary's suggestion, get better discs. That burn that you say it was successful, but you cannot use the disc: What exactly were you trying to burn? That 135 MB doesn't look like a DVD compilation.
Re these discs, I informed member to get better quality ones in my first post....she has however updated her Nero and firmware as advised. It was also advised to slow the burn to 4X @Cyprusrom, the discs in question are an Indian produced disc of low quality.
R05 is PRODISC R05, a cheap, nasty manufacturer similar to CMC-MAG, but not as bad. I recommend using some better discs ASAP and slowing the burn speed to 4x just to be sure. EllyHuhle: Be CAREFUL, when updating your firmware. The GWA model LG writers are custom model jobs for each computer manufacturer that bundles them in the systems they sell. So a GWA that comes with a Compaq system might not be the same as the one that comes with a Dell system. That's why when updating your firmware ONLY use firmware that is distributed from the company that manufactured your computer.
@ Amir Gwendolin provided with very good link for firmware update, that has been taken care of. Just lingering on that issue I think creates more confusion..."what, firmware,where, I thought I did that?!?" I understand what you are saying about "GWA model LG writers are custom model jobs for each computer ", however, pretty easy to distinguish between them. The Dell OEM has a E1XX firmware, the Fujitsu OEM has a 1.XX firmware. As for that media code, those are not Prodisc, is a Moser Baer that could be sold as Phillips, Memorex, Imation,Acme, Emtec..all kinds of saddy names. R05 is the code for X16 speed(R04-X8, R03-X4). The Prodisc R05 you were referring to are probably sold as Fujifilm X16 discs. @ gwendolin Thanks.
Thank you Rotary. I will buy YT or Verbatim DVD's as you suggested. Can you tell me why I can not read the DVD I have burnet? It was made with an -R Also how do I booktyped format for better campatibility or where can I find the guide. Thank you so much.
@Elly here's a guide for booktyping which you can only do with Dvd+ R/RW format. http://www.afterdawn.com/guides/archive/how_to_set_booktype_for_blank_dvd_r_w__media_page_2.cfm
