TUTORIAL: How to FTP...Made EASY!!

i have my modem then from the modem it goes 2 a router then from were my conection on the router it goes 2 a wall. then from the wall there is a long line from the ofice were my modem is2 my room. then from my room i have 1 ethernet cord that goes from the wall to the router then i have my xbox and pc hooked up 2 my router

 

You have two router (if that's the case) there is your problem??

**edit: it can be done though if that's your setup.

 

it doesnt showany thing in type and there is no ip

 

thank god
i will try it all 2morow
thanks for all ur help

 

You need to know where to go to configure it for two routers:

www.portforward.com
http://www.portforward.com/help.htm
*the solution to your current setup will deal with port forwarding from one router to the other*

You may be asking for more trouble than it's worth utilizing two routers. If there is not a computer in the room with the first router, why don't you just plug the modem into the wall connection that travels down to your room. OR even easier, take away the second modem and plug that wall connection in your room, directly into your PC. Then plug your xbox into that connection via a crossover cable and it should work like normal.

 

there is a computer in that room but the only problem is that the cd drive is broken but if needed i can put my com in there instead. i dont get that at all so im going to try it downstairs first before anything else.

 

uniique1 can i get your aim name?

 

[bold]@ragger[/bold]

I'm not fully understanding your last post.

 

[bold]@farapple[/bold]

I would prefer if you had an issue to post it in the forum and let me try to help. I'd hate to go back and forth with you on messenger when other members may benefit from being able to see and help as well or get some of their questions answered.

 

uniique i need ur help can u tell me step by step how to network bridge so in halo2 i always get host. Im tring to do it with a dlink router and dsl. thanks

 

Having problems connecting to xbox... I'm connected from the modem to a Belkin Router, which i can either go wireless on my laptop or not.. then from my router i've conected the computer and xbox... on flash this is what i get

[R] Connection failed (Connection timed out)
[R] Delaying for 120 seconds before reconnect

any help... went through tutorial and everything looks fine

 

@Topvip

Go to the link below it is an FTP guide that Uniique1 has done it is a good guide. So go to it setup the connection like he sugest and if you still have trouble then feel free to ask for more help.

http://forums.afterdawn.com/thread_view.cfm/228294

 

@larrylje

I've been back and forth on that tutorial... and still unable to connect.. still getting this

[R] Connecting to XBOX -> IP=192.168.1.101 PORT=21
[R] Connection failed (Connection timed out)

 

Ok so you have your Xbox set to DHCP right? That way the router will choose what IP to give.

So make sure the IP your putting in the FlashFTP is the IP listed on your Xbox. turn on the Xbox and look at the IP address the router has giving it.

what are you trying to FTP the Xbox to? your computer or laptop?

Which ever 1 you are trying to connect to you need to go in and check and make sure the network conections are the same as on the Xbox in exception of the IP address.

Example with my setup.

Computer network settings
IP= 192.168.0.100
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1

Xbox network settings
IP= 192.168.0.102
Subnet mask: 255.255.255.0
Default gateway: 192.168.0.1

Make sure the subnet mask and the default gateway is the same in the network settings in both your Xbox and Computer.

 

I'm using Evox on my xbox... and also using a laptop. when i turn on my xbox my ip shows 192.168.1.101

when i went to "cmd" i show..

DHCP... enabled............... yes
autoconfiguration enabled..... yes
IP.................... 192.168.2.2

 

Ok do this

go into your network settings and write down what IP you have on your laptop and the subnet mask and the default gateway. Now go into your Xbox write down the same info.

And post it on here so we can make sure it is right.

You have went into the setup on your Evox and choose to enable DHCP right?

If not go into your Evox network setting and under the Static IP option change it to "NO"

It looks like your problem is your IP for your computer is 192.168.2.2 and the IP for your Xbox is 192.168.1.101

 

Thanks for your help... I'm able to connect now
very apreciated

 

No problem thats what we are here for. Now maybe you can help others when they need help. Its all a learning experience.

 

Question.. when I insert a game into the XBOX.. why does it kill my conection...

[L] Connection lost: XBOX