TUTORIAL: How to FTP...Made EASY!!

im new to this im trying to connect my xbox to pc but it wont connect trough flash fxp cause it says

WinSock 2.0 -- OpenSSL 0.9.7g 11 Apr 2005
[R] Connecting to Xbox -> IP=10.0.0.2 PORT=21
[R] Connection failed (Connection timed out)

can anyone help fix this problem i have read all the guides but i dont know what i have done wrong send me an email with all the info thanks (m_tipping04@hotmail.com)

 

im new to this im trying to connect my xbox to pc but it wont connect trough flash fxp cause it says

WinSock 2.0 -- OpenSSL 0.9.7g 11 Apr 2005
[R] Connecting to Xbox -> IP=10.0.0.2 PORT=21
[R] Connection failed (Connection timed out)

can anyone help fix this problem i have read all the guides but i dont know what i have done wrong send me an email with all the info thanks (m_tipping04@hotmail.com)

 

where do i get the cables or whatever needed to connect to my computer?? or how do i use the router method because i have one.

 

@AUGBOY
You can get the cables you need at your local computer store. If you're using a router, just plug your xbox into the router and enable DHCP on your xbox to get a working connection.

The tutorial at the beginning of this post covers that.

 

how do you enable DHCP?? so basically the first thing i should do when i get my modchip installed is what???

 

I can help with that one

Once you install the mod chip, you have to flash it with a bios/os (like evox) and after you do that, you need to install another dashboard (to enable the ftp link). After all that, then follow what the first post says.

 

aight.. so install evolution x then install something to enable the ftp link?? which program should i install for that?

 

That would be another dashboard, i have evolution X dash board, i think evox is the bios (flash on the mod chip)

EVOX is bios/enables copyed games to be played (nothing to do with the dash board)

Evolution X is a dashboard to replace the M$ dashboard (the screen you get with no disk in) (with this dash board, you can ftp and also you can set more advanced settings.)

*The dash board can load right off a dvd disk and not mess up your M$ dashboard (so you can turn off your mod and play live)

 

can you basically jus put a real quick step by step guide(1,2,3) in the order of what i should do starting with after my modchips is installed cuz dis iz new and im use to PS2 and emulators. I want to find out how to get emulators and roms on my xbox..... im not trying to save backups on my xbox.

 

@ larrylje

It does it as soon as i connect without a game in the xbox. I didnt try to start a game.

 

I think thats starting to get off topic, this is for ftping... but heres a quicky

1 insall mod chip
2 flash mod chip with a bios (like evox)
3 burn a dashboard for ftp use (like evolution x), this allows ftping, and all fancy stuff you would like to run on your xbox
4 ftp to your xbox and do what you want (copy a game/ change dashboards, etc.)
5 umm have fun

 

aight thats exactly what I needed.. Appreciate that

 

No problem, i got help on here so i had to give some help back

 

@ tEChniiQue

Sorry to be a pain! I tried using static ip's for both the xbox and my pc but it does the same thing as before.

Any suggestions ??

 

hey that i will try

 

@asx_100
Are you positive that your Static IP information was input correctly? Honestly, it should be a very simple process. Open you PC's COMMAND PROMPT (Start, Run, Type: cmd, the type: ipconfig/all...write down that info and use it for your connection on both devices.

Make sure that your firewall has allowed the program to work on your PC...that could also be a problem.

You're doing a direct connection, right? Make sure that you are using a crossover cable.

 

hi im on the verge of pulling whats left of my hair out over this. ive followed every tutorial on the net practically and no luck. ill try and put everything relevent so it might be a long post

using a direct cross over cable from xbox to pc and am using flashfxp

xbox settings
using evox 3935 dash
static ip

IP:192.168.200
Subnet : 255.255.255.0
gateway: 192.168.1.1
DNS: 194.63.248.1
DNS: 217.13.7.140

PC settings
Lan Connection
DHCp enabled = no
IP: 192.168.1.100
subnet: 255.255.255.0
gateway: 192.168.1.1
DNS :194.63.248.1
DNS : 217.13.7.140

when using flashfxp to connect it says the following

I have only got one LAN card and i connect to the net through a USB modem

i would really appreicate some help with this thanks

 

hey guys... i really need and want some help.... i wanna get my xbox to connected with flash fxp.....and ive used all tutorials available and i am stuck at this point.....

WinSock 2.0
[R] Connecting to XBOX -> IP=192.168.0.3 PORT=21
[R] Connected to XBOX
[R] 220 Please enter your login name now.
[R] USER xbox
[R] 331 Password required for xbox.
[R] PASS (hidden)
[R] 230 User xbox logged in , proceed.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 502 feat is not implemented.
[R] REST 100
[R] 502 rest is not implemented.
[R] This site may not allow file resuming
[R] PWD
[R] 257 "/" is current directory
[R] TYPE A
[R] 200 Type set to ASCII.
[R] PORT 192,168,0,106,11,89
[R] 200 Port command ok.
[R] LIST -al
[R] 150 Opening ASCII data connection for ls /.
[R] 226 Transfer finished successfully. Data connection closed.

im using a direct cross over cable and im clueless at what to do now....

can anyone please help me......?????????

 

i need help with FTP

dose any one know how to get the sites option on SMARTFTP
cuz im Clueless

Edit:>> i have smartftp as FTP software
and Unleash X as a modded dash

ip settings on static with the correct ip

i have a cross over cable from my router to my xbox and computer

HELP??

 

how do u get those skins in the walkthrough